HHB CDR830, CDR830 PLUS Technical Bulletin
TECHNICAL BULLETIN
HHB CDR830 AND CDR830 PLUS CD RECORDERS
PLEASE READ BEFORE CONTINUING
When choosing appropriate media to use in the CDR830, it is essential to take into
account this product is, like all professional audio CD recorders, a real-time burner.
This means that the recorder will burn at 1x speed. Therefore, to obtain the best
quality recordings, and to ensure a longer life of the laser assembly, it is essential
that low speed media is used in the CDR830. Most computer type CDR drives use
high speed CDR media (up to 52x) which are not suitable for use with this product.
We recommend that low speed 1x to 24x media should be used in the CDR830
If high speed discs are used in the CDR830, the recordings may contain audible
and uncorrectable errors.
There are several other problems caused by burning high-speed media.
The CDR830 will fail to recognize the disc and give a “check disc” message on the
display. Also, discs may not finalize properly. Consequently, high-speed media will
shorten the life of laser assembly. Failing to use the correct media will void the
manufacturers 12 months
warranty.
To avoid future problems and to achieve optimum results, we strongly recommend
using only
low speed media in the CDR830 such as the following HHB Professional
Recording Media products:
HHB CDR74
HHB CDR74Gold
HHB CDR80
HHB CDR80IP
HHB CDR80BulkIP
HHB CDR80BulkThermal
Also we recommend using Mitsui 1x to 12x media and Apogee Gold media.
10th January 2005
.
y Tel: + 44 (0) 20 8962 5000 y Fax: + 44 (0) 20 8962 5050 y e-mail: service@hhb.co.uk y http://www.hhb.co.uk
yHHB Communications Ltd y 73 - 75 Scrubs Lane London NW10 6QU UK
Loading...