![](/html/28/283a/283a145cf633b0579c0d01e6ac7921526fd2b38acf02cf107ead73d4266953ad/bg2.png)
Product Specifications.............................................................................................................................1
Interface Description...............................................................................................................................2
Check the flight control drive................................................................................................................3
Calibration accelerometer......................................................................................................................4
URAT serial port use.................................................................................................................................5
Select aircraft model.................................................................................................................................6
Choose ESC/Motor protocol...................................................................................................................7
Voltage and current parameters setting............................................................................................8
Setting up the receiver..............................................................................................................................9
VTX uses OSD smart audio.....................................................................................................................10
GPS parameters setting...........................................................................................................................11
Check receiver signal................................................................................................................................12
Select flight mode startup mode...........................................................................................................13
OSD settings.................................................................................................................................................14
LED settings.................................................................................................................................................15
switching gyro.............................................................................................................................................16
Troubleshooting.........................................................................................................................................17
.......................................................................................
Package IncIuded
2
www.hglrc.com
![](/html/28/283a/283a145cf633b0579c0d01e6ac7921526fd2b38acf02cf107ead73d4266953ad/bg3.png)
1.Product Specifications
for 180mm-1000mm Frame Kit
Forward F7 Dual Gyro Flight
Controller
46*45*30mm
30.5mm mounting holes(M3)
48.2g (Including Receiver)
3
www.hglrc.com
![](/html/28/283a/283a145cf633b0579c0d01e6ac7921526fd2b38acf02cf107ead73d4266953ad/bg5.png)
3.Check the flight control drive
1. Long Press BOOT buttons.connect USB.The system automatically
install the driver
2.Driver cannot be installed, please download ImpulseRC_Driver_Fixer
3.Double-click on the run(Plug in the flight controller to automatically
install the driver)
4.open betaflight configurator ,enter DFU mode (It is
recommended to use the latest Betaflight version)
5
www.hglrc.com
![](/html/28/283a/283a145cf633b0579c0d01e6ac7921526fd2b38acf02cf107ead73d4266953ad/bg6.png)
5.Click Select firmware version(Dual 8K is
recommended. (Betaflight 4.0 firmware does not support 32K))
6.Click Load firmware. Waiting for
completion It will be prompted upon
completion.
7.open betaflight configurator
Controller plugged into the
。
computer. Betaflight Automatically assigned port,click “Connect”
Enter setup interface(Different computer COM)
6
www.hglrc.com
![](/html/28/283a/283a145cf633b0579c0d01e6ac7921526fd2b38acf02cf107ead73d4266953ad/bg7.png)
4. Calibration accelerometer
1. Put the aircraft horizontal and click“Reset Z axis”
Click again
7
www.hglrc.com