HeyCafe HC-880 LAB OPERATING & SERVICE MANUAL

HC-880 VER2.1 – Manual book

Bulk Coffee Grinder

OPERATING & SERVICE MANUAL

HC-880 LAB

HeyCafé Co., Ltd. Page 1 of 13 Page 1 of 13

09/11/2017Ver.1

HC-880 VER2.1 – Manual book

WARNINGS

1 This Grinder is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the Grinder by a person responsible for
their safety.

2 Children should be supervised to ensure that they do not play with the Grinder.

3 Care is needed when handling cutting blades during cleaning.

4 If the supply cord is damaged, it must be replaced by the manufacturer or its service agent

or a similarly qualified person in order to avoid a hazard.

Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems
or contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.

Warranty Information

The manufacturer provides warranty in accordance with the legislation of the customer's own country

of residence, with a minimum of 1 year (Germany: 2 years), starting from the date on which
the Grinder is sold to the end user. The warranty only covers defects in material or
workmanship. The repairs under warranty may only be carried out by an authorized service
center. When making a claim under the warranty, the original bill of purchase (with
purchase date) must be submitted.

The warranty will not apply in cases of:

• Normal wear and tear

• Incorrect use, e.g. overloading of the Grinder, use of non-approved accessories

• Use of force, damage caused by external influences

• Damage caused by non-observance of the user manual, e.g. Connection to an unsuitable

mains supply or non-compliance with the installation instructions

• Partially or completely dismantled Grinders

HeyCafé Co., Ltd. Page 2 of 13 Page 2 of 13

09/11/2017Ver.1

HC-880 VER2.1 – Manual book

1) Preface………………………………………………………………….4.

2) Technical Specifications..........................................4.

3) General Description………………………………………………5.

4) Unpacking and installation……………………………………5.

5) Operation……………………………………………………………..6.

6) Safety devices……………………………………………………….7.

7) Safety instructions………………………………………………..7.

8) Maintenance and service………………………………………8.

TABLE of CONTENTS

9) Cleaning………………………………………………………………..10.

HeyCafé Co., Ltd. Page 3 of 13 Page 3 of 13

09/11/2017Ver.1

HC-880 VER2.1 – Manual book

1) PREFACE

Congratulations for purchasing the HC-880 LAB grinder. The HC-880 LAB is a commercial
Grinder to be used by professional users at groceries, coffee shops, coffee roasters, espresso
bars, hotels and restaurants. The HC-880 LAB grind’s whole been coffee into a container (not
provided) with variable stepless grind setting dial, from super fine to course coffee powder.

Read this manual from cover to cover before using the Grinder as it contains important
safety, operation, and maintenance instructions for the proper use of the Grinder. Keep the
manual in a safe place for future use and reference.

The manufacturer reserves the right to modify the grinder and the manual accordingly.

For any questions please refer to your local dealer.

2) HC-880 LAB TECHNICAL SPECIFICATIONS

Dimensions:

Height: 685mm, Width: 180mm, depth: 450mm
Weight: 26Kg
Disks diameter: 84mm
Beans hopper’s capacity: 2.0Kg Coffee beans

Electrical Specifications (single phase):

220V/50Hz Maximum current 4.5 Ampere
220V/60Hz Maximum current 5 Ampere

Grinding capacities:

>450gr/min. @ #3 setting (espresso)

Powder coarseness:
100micron-1000micron @ #1setting to #9 setting

HeyCafé Co., Ltd. Page 4 of 13 Page 4 of 13

09/11/2017Ver.1

HC-880 VER2.1 – Manual book

Main switch

Grinding dial

Coffee powder outlet chute

Residue tray

Beans hopper lid

Grinder’s body

Over-load protector cover

Warning: All grinder’s technical handling operations such as installation, maintenance, or
service should be performed by certified personnel or by your local dealer.

3) General Description

4) UNPACKING AND INSTALLATION:

1. After opening grinder’s package, make sure that the Grinder is intact and that there is no
visible damage. If there is any doubt, DO NOT continue the installation procedure and
contact your local dealer for further assistance.

2. Unpack the product carefully. For your convenience we suggest storing all packaging
materials where they can be used in the future, whenever the Grinder’s transportation is
necessary.

3. Place the grinder on a stable flat counter in a dry area away from water or water splashes.

4. Open hopper’s beans lid and visually inspect that there no foreign objects of any kind
remove any foreign object accordingly.

5. install the hopper lid‘s handle with the provided screws and screw driver. Make sure to

tight the screws so they cannot fall into the grinding chamber.

6. Install the grinder’s powder residue tray.

7. Before plugging in the electrical cord, make sure:
a) The Grinder voltage and frequency rating (according to the back side label) is the

same as the supply mains.
b) The wall socket is fitted with an efficient ground contact.
c) DO NOT plug the Grinder into the supply mains if a ground system is not available in

mains socket, socket should in compliance with national/local electrical codes.
d) IT IS COMPULSORY TO GROUND THE GRINDER. The manufacturer cannot be held

f) The power consumption of the Grinder (according to the back side label) is

g) The wall socket is protected against short-outs and power surges.
h) Do not: use extension cables, plug adapters for multiple sockets, or make shift

8. Plug in the Grinder.

HeyCafé Co., Ltd. Page 5 of 13 Page 5 of 13

09/11/2017Ver.1

responsible if this obligatory requirement was not complied.

consistent with the relevant wall socket capacity.

connections.