Page 1
HXSP-1002
2 ports RS-232 or RS-485/422
serial device server
user manual
Page 2
【Summary】
HXSP-1002 is a serial device server which can contact with network fast. It
provides one line
RS-232/485/422 (RS-232: DB9M: RS-484/422 / 4 bits terminal block) and 1line 10Base-T, it can
manage the disperse serial device or host computer by network, easily and convenience. Setting or
software upgrade by serial program group in applying. Support TCP, UDP, ARP, ICM and DHCP
protocol, support Windows Native COM and auto-contact function once the network intermit.
In addition, HXSP-1002 provide the managed collocate tools that based Windows flat roof. it
can lead the user manage and configure facility step by step, all of the setting can be done by
network
or serial .Support pass gateway and router, easily for user to set IP address, Server
and Client mode , size of data and so on, Can realize the serial device contact with network by
simply setting.
【Package checklist】
HXSP-1002 is packed with the following items. If any of these items is missing or damaged,
please contact your customer service representative for support.
HXSP-1002
User manual
Power adapter 5VDC
Straight network cable
Software CD-ROM
Product Warranty booklet
Optional accessories:
DIN-Rail Mounting Kit (35mm)
【Feature】
Support RS-232/RS-485/RS-422
Support Socket application.
Support Sever and Client mode.
Support Windows/Linux COM serial driver mode.
Support TCP, UDP, ARP, ICMP and DHCP protocol
Support all of Windows Native COM and auto-contact function once the network blackout.
Support passing gateway and router.
All of the setting can be done by network and serial
Proper Serial auto-connection (On-the-fly)
【Capability】
Ethernet port
Standard: 10Base-T, 100Base-TX
Protocol: support TCP, UDP,APR, ICMP and DHCP protocol
Signal: Rx+, Rx-, Tx+, TxSpeed: 10/100Mbps
Working format: full or half of duplex
Work mode: support Server and Client mode
Port memory: 512byte
Transmit distance: 100m
Interface protection: 1.5KV ESD
Interface type: RJ-45
Serial interface
Page 3
EIA RS-232, RS-485, RS-422 standard
NO.of ports: 2 RS-232 or RS-485/RS-422 (RJ45) port optional
RS-232 signal: TxD, RXD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 signal: Tx+, Tx-, Rx+, Rx-, GND
RS-485 signal: Data+, Data-, GND
Parity: None, Even, Odd, Space, Mark
Data bit: 7bit, 8bit
Stop bit: 1, 1.5, 2
Baud rate 150bps～230400bps
Flow control: RTS/CTS or non-flow control
RS485 data direction:ADDC (Auto data direction Control)
Loading: RS-485/422 side support 32 nodes (optional 128 nodes)
Transfer distance: RS-485/422 side: 1200m, RS-232 side: less than 15m
Serial line protect: 1500W surge protect, 15KV magnetic isolation
Power supply
Power supply input: 5VDC
Consumption: 300mA
Environment
Operating temperature: -20℃～60℃, 5～95% RH
Storage temperature: -25℃～85℃, 5～95% RH
Appearance
Color: black
L×W×H: 100mm×69mm×22mm
Material: Iron (shell)
Weight: 230g
【Panel】
Page 4
pin
MDI signal
MDI-X signal
1
TX+
RX+
2
TX-
RX3
RX+
TX+
6
RX-
TX4, 5, 7, 8
—
—
【LED indicator】
Power supply input: ATC bright all along
Serial 1 connected: Port1 on bright all along
Serial 2 connected: Port2 on bright all along
Connected network: LINK and TX/RX indicator bright all along
10/100Base-T Ethernet port
The 10/100BaseT(X) ports located on facility front panel. The PIN define of RJ45 port display as
follows, Connect by UTP or STP. The connect distance is no more than 100m. 100Mbps is used
100Ωof UTP 5, 10Mbps is used 100Ωof UTP 3, 4, 5.
RJ 45 port support automatic MDI/MDI-X operation. Can connect the PC, Server, Converter and
HUB by straight–though cable. Pin 1,2,3,6 Communication connect in MDI. 1→3, 2→6, 3→1,
6→2 are used as cross-over cable in the MDI-X port of
Converter and HUB.
10Base-T/100Base-TX are used in MDI/MDI-X, the PIN define in the table as below.
1 8
Note: “TX±” transmit data±, “RX±” receive data±, “—”not use.
MDI (Straight-through cable):
RJ45
8
1
TX+
3
TX-
6
RX+
1
RX-
2
3 RX+
6 RX-
1 TX+
2 TX-
MDI-X (Cross-over cable):
RJ45
8
1
(RX+)
TX+
3
(RX-) TX-
6
(TX+)
RX+
1
(TX-)
RX-
2
1 RX+(TX+)
2 RX-
(TX-)
3 TX+ (RX+)
6 TX- (RX-)
RS-232/485/422 serial port
Page 5
RS-232
RS-485
RS-422
1
TXDD+RX+
2
RXDD-TX+
3
RTS
RX-
4
CTS
TX-
5
DSR
FULL
6
GND
GND
GND
7
DTR
8
DCD
【Software installation and setting】
1 Set the IP address of the device
The IP address of the device and the PC must in the same subnet network
(the default IP address of the device is 192.168.1.233). First, must make the IP address of
the device in the same subnet network of PC.
If they are not in the same subnet network or the IP address have been used by another device,
Use Telnet change the IP address of the device
1 “Start”------“all programs”------“Running”
Input default IP address of the device “Telnet: 192.168.1.233”
Page 6
2. Click “OK”, setting the IP of device by telnet. Choose the menu by
↑↓←→
of the
keyboard and quit by “ESC” key.
3 Choose the “Server” menu and push “Enter” key, Change the IP of the device.
4 Change the IP (the changed IP must be in the same subnet of the PC). Push “Esc” key,
quit the network setting.
5 Push “Enter” key
Page 7
6 Push “Enter” Key, save the setting.
2. Create the Virtual COM port on the PC
Setup the “setup_nt_2K.exe” software, then you will find the “COM port over
tcp/ip.exe”
application in the control panel of windows OS.
Running the “COM port over tcp/ip.exe” application and create virtual COM port communicate
with the device on the PC.
Choose the name of the virtual COM port and click “Map” button, setting the parameter of the
Page 8
virtual COM port as follows:
1 Input the IP of the device
2 Input the NO. of the port of the device(Inpu t 1~8)
3 Input 300
4 Default the parameter
Click the “OK”, Click “Save”. COM5 has been created.
Now, the COM5 can communicate with the terminal on the NO.1
port of the device.
Page 9
Other Virtual COM port setting the sa me as COM5
Note: Pay attention to the questions as below:
(1) Please make sure that the power adapter is 5VDC
(2) When connect to PC, use cross-over cable.
(3) When connect to HUB or Switch, use straight-through cable
【Installation】
HXSP-1002 provides DIN-rail and wall mounting two typesof installation
DIN-Rail Installation
In order to use in industrial environments expediently, adopt 35mm DIN-Rail installation, the
installation steps as fellows:
Examine the DIN-Rail attachment
Examine DIN Rail whether be firm and the position be suitability or not .
Insert the top of the DIN-Rail into the slot just below the stiff metal spring.
The DIN-Rail attachment unit will snap into place as shown below.
Page 10
【Application】
NP322 application sketch map:
Working mode:
1. Based on Virtual COM port
2. Based on WinSock access
Please note that if PC in Client (Server), the HXSP-1002 must in Server (Client)
Loading...