Page 1
HXJZ-881 Micro Power Wireless Module
User’s Manual
Page 2
About HXJZ-881
HXJZ-881, the Micro power wireless module, is used as the wireless data transmission in short distance.
With the small size, weight and power consumption and good stability and reliability, it has the function
of bi-directional data sign transmission, test and control.
It is used for Wireless meter reading, such as water meter, electric meter and gas meter, parking meter,
intellective card, electronic weighing apparatus, meter for checking on work attendance, queue wireless meter,
building control, shipping company control, alarm system, intelligent equipment, Automatic data
collecting system; Industrial remote control and remote test building automation, safety and
security, powerhouse equipment wireless monitor, entrance control system, etc. It provide the USB power
interface to be convenient
for the mini computer and PC users if necessary.
JZ8881 Feature
1.Ultra low power transmission
Transmission power ＜10mW, high receiving sensitivity: -120dbm, size: 39.4mm*24mm*8 mm.
2. Low power consumption
Receiving current<35mA, transmission current<40mA, sleeping current (the user need to ask for it before
place an order). < 1mA.
3. ISM frequency band, not requiring on application of f requency point
Carrier frequency of 490MHz，also capable of 160/230/315MHz
4. High anti-interference and low BER (Bit error Rate)
Based on the FSK modulation mode, it adopts the efficient communication protocol. The actual bit error
rate of 10-5 ~ 10-6 can be achieved when channel bit error rate is 10-2.
5. Long transmission distance
Within the range of visibility, the reliable transmission distance is（BER=10-3/1200bps） >500m when the
antenna height is greater than 2m (BER=10-3/9600bps).
6. Transparent data transmission
Transparent data interface is offered to suit any standard or nonstandard user protocol.
Any false data generated in the air can be filtrated automatically (What has been
received is exactly what has been transmitted). The charge time for receiving and sending <10ms.
7. Multi-channel and speed
The standard HXJZ-881 configuration provides 8 channels to meet the multiple communication
combination mode of the users. It has baud rate to be chosen such as 1200bps、2400bps、4800bps、9600bps、19200bps.
The
wireless transmission rate is direct ratio with baud rate of interface to meet user’s equipment requirement.
8. High speed wireless communication and large data buffer
When the speed rate in the air is quicker than interface’s, allowing to transmit unlimited length data at one
time, when the speed rate is slower or equal the interface’s, allowing the transmission of 255 Bytes long data
frames at one time for more flexible programming by users.
9. Intelligent data cont rol and the user doesn’t need to prepare excessive programs
Even for semi duplex communication, the user doesn’t need to prepare excessive
programs, only
Page 3
receiving/transmitting the data from the interface. HXJZ-881 will automatically complete the other
operations,
such as transmission/receiving conversion in the air, control, etc.
10. High reliability, small and light
Single chip radio- frequency integrated circuit and single chip MCU are used for
lessened peripheral circuits, high reliability, and low failure rate.
11. Watchdog monitor
Watchdog monitors the inner function, so that change the traditional product structure and
improve the product reliability.
Application of HXJZ-881
1. Dimension
(Remarks: Jack space between is 2.0 mm.)
Page 4
2.HXJZ-881 interface definition
1) User’s interface
HXJZ-881 have one interface of TTL.
In standard interface, the plastic socket gap upward, from left to right,1-8 pin in turn, as follows;
Definition of connecting pins and connection method:
Item no
PIN
Description
User’s terminal
Remarks
1
VCC
+5±0.5V
+5V
3V is possible for user
2
GND
Power supply/Ground
DGND/AGND
3
TXD
Serial data transmitting
TTL
User receiving
4
RXD
Serial data receiving
TTL
User transmitting
5
RXD/RS-485(A)
Serial data receiving
TXD/RS-485(A)
User transmitting
6
TXD/RS-485(B)
Serial data transmitting
RXD/RS-485(B)
User receiving
7
SLE
Sleeping control
Don't’ open
8
GND
Power supply/Ground
DGND/AGND
Remarks:
a. HXJZ-881 with sleeping function is not open in default ,if the user need ,then you must say it clearly
when you place an order.
b. The standard power supply is 5V ,if the user need 3V ,then must tell us before place an order.
2) Power supply
HXJZ-881 uses DC power supply with voltage of +5V. It can also share power supply with other
equipment, however, the high quality power supply with desirable ripple factor should be selected. In addition,
the reliable grounding must be used if there is other device in the system equipment. In case of failure to
connect with the earth, it can form its own grounding, but it must be absolutely separated from the municipal
electric supply.
3). Power Saving model
HXJZ-881 consists of Sleeping Model and Non-sleeping model. The power is 10Ua when sleeping. The
user need to specify which model you need .
Awaken from Hardware, you can input high level in 7pin, then it sleep.
If don’t need sleep ,then u can connect 7 pin to ground. It will not sleep.
3. HXJZ-881 Parameters Setting
HXJZ-881 have one interface of TTL.
HXJZ-881 main parameters: COM baud rate and verify, RF baud rate, Channel and frequency.
You can change these parameters by our RF Module soft. When RF baud rate is faster than COM baud rate，
One frame Can transmit limitless data. When RF baud rate is not faster than COM baud rate, one frame can
transmit 255 bytes most. You can set the rate according your need.
Two HXJZ-881 communicate must have condition as follow:
1.Their channels (i.e. frequency) are the same.
2.Their RF rates are the same.
3.RF Module Com baud rate and verify is agree with its equipment or PC that it connects with.
Page 5
Parameters default:
Channel： 1
Interface speed rate：9600BPS
Interface verify：none
Speed rate in air：9600BPS
Channel and frequency list
Channel
Frequency
Channel
Frequency
1
487.5072MHZ
5
490.6942MHZ
2
488.4289MHZ
6
491.1580MHZ
3
489.2329MHZ
7
491.7360MHZ
4
489.9260MHZ
8
492.4388MHZ
Technical specification of HXJZ-881
Modulation mode: FSK
Working frequency: 487--493MHZ
Transmission power: <10mW
Receiving sensitivity: -120dBm
Transmitting current: <45mA
Receiving current: <35mA
Sleeping current: <10mA
Channel speed rate: 1200/2400/4800/9600/19200Bit/s, User can Choose one
Interface speed rate: 1200/2400/4800/9600/19200Bit/s, User can Choose one
Change time for receiving and sending: <10ms
Interface data format: 8E1/8N1/8O1
Power supply: 5±0.5V DC
Working temperature: -20℃～85℃
Working humidity: 10%～90% relative humidity without condensation
Dimension: 39.4mm*24mm*8mm
Attachable Communication with Model: HXJZ-881/JZ882
Model and name
JZ
881
-T
T: TTL interface
Naked board
Company logo
Page 6
Optional Antenna:
Trouble and solve ways:
NO.
Trouble
Trouble causes and solve ways
1
No shine of
Indicator light
a、Power Line badness touch .
b、Power is bad.
c、Power line meet in reverse, or diode of polarity protect is bad.
2
No transmit
or
No receive
a、Radio is badness touch with PC/terminal.
b、Radio with TTL/RS232/RS485 not match terminal.
c、RX frequency and TX frequency is not same.
3
Bit error rate
High
a、antenna not match, or touch bad;
b、RF baud rate is not right. c、
Power supply ripple is too great.
4
Indicator light
twinkling
a、Electromagnetism disturb in circumstance.
b、Same frequency disturb in the circumstance.
Loading...