HEXGEARS GK70 User Manual

98mm 100mm100mm

TYPE-C Interface

4. Basic speciﬁcations

Keyboard type : Mechanical keyboard Switch : Kailh Choc Switch Report Rate : 1000HZ Switch life : 70 Million Actuations Keypad : 108 key/Anti-ghosting Cable Length : 1.8m Φ4.0mm braided USB

Function : FN combination function key Connector : Type-C & Bluetooth Voltage / Current : DC 5V / 500mA Handing force : 55±10gf

Weight : 660gSize : 435 x 140 x 30 mm

5. System Compatibility

Win2000、 Win ME、 Vista、Android、linux、Windows XP/ 7/8/10 / Mac OS

6. The name and content of the hazardous substance in the product

Component name

keyboard body

Metal case

Plastic keys

This form has been prepared in accordance with the requirements of SJ/T 11364. O : Indicates that the content of the hazardous substance in

all homogeneous materials of the component is below the limit speciﬁed in GB/T 26572.

X : Indicates that the hazardous substance is contained in at

least one homogeneous material of the component.The quantity exceeds the limit speciﬁed in GB/T 26572.

(Pb)

(Hg) (Cd) (Cr(VI)) (PBB) (PBDE)

Hazardous substances

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause

undesired operation.

2. Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However,there is no guarantee that interference will not accor in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment oﬀ and on,the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an autlet on a circuit diﬀerent from that to which the receiver is

connectec.

• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction.

GK70 MECHANICAL KEYBOARD

Quick Start Guide

7. Warning

If any liquid enters the product, please immediately disconnect from the computer and remove the

product. Continued use may cause ﬁre or electric shock, please contact the agent for inspection and maintenance.

Check the product shell regularly for any damage, maintenance operations are outside the scope of product compliance requirements.

Disassembly, replacement of parts, modiﬁcation or modiﬁcation without express approval will cause the user to lose the right of operating the equipment and the warranty failure.

1. Product introduction

The user interface and other illustrations of the product accessories in the manual are all schematic

diagrams, which are only for reference. Due to the update and upgrading of the product, the actual

product may be slightly diﬀerent from the schematic diagram. Please refer to the actual product.

Keyboard Switch Shortcut Keys

Backlight Function Key

Lock WIN key

Lock Full Key

TYPE-C USB Cable

FN Keys (27 FN combination keys)Bluetooth Switch

2. Use instructions

Switch for transferring between Wired and Wireless mode: It is bluetooth model when the switch

is in blue color,and wired mode in green color. (During charging, the wired mode is in orange color. Ater full charging, bluetooth mode is in blue color while wired mode in green color.）

Wired USB connection:

Connect the USB TYPE-C port to the keyboard, and

then connect the USB to the computer ,

No need to

install driver software and you can use it directly as to computer. It supports USB plug-and-play.

Bluetooth mode:

Press the button to switch between bluetooth and wire mode.The blue indicator light will on when

under bluetooth mode.When match code,the blue light will ﬂash 2 times per second,until it matches

successfully.After matched code,the blue light ﬂash 1 time(2 times/S) and then keep blue color. If

the keyboard can not be connected to bluetooth device in 3 minutes,it will exit directly and keyboard

enter sleep mode. Hold for 3S FN+1,FN+2,FN+3,FN+4 to match bluetooth devices.The name of the bluetooth is Hexgears-BK1、Hexgears-BK2、Hexgears-BK3、Hexgears-BK4.

After connected the keyboard to bluetooth devices,it will enter power saving mode if you do not use it in 1.5 minute,backlight will oﬀ. Press any key to wake up this state.If do not use it in 15 minutes, keyboard will enter deep sleeping mode and the current will be less than 100uA. Press any key to wake up this state.

soon as connnected

device hot-plug,

MFRS.: HEXGEARS (DONGGUAN) CO . LTD

Add.: Building 9,No.9 Daxue RD,Songshan Lake,Dongguan,P.R. China.

3-01. Connection

Toggles between USB and Bluetooth modes

Connect to Bluetooth device 1

Connect to Bluetooth device 2

Connect to Bluetooth device 3

Connect to Bluetooth device 4

3-02. RGB Backlighting

Backlight switch: Press it to turn oﬀ the key backlight. Press it again to turn

oﬀ the side LED backlight and turn on the key backlight. Press it the 3rd time

to turn oﬀ all the backlight.

Key backlight eﬀect mode switch

Side backlight eﬀect mode switch

Key backlight color switch

Side backlight color switch

Decrease side backlight speed

Increase side backlight speed

Decrease side backlight brightness

Increase side backlight brightness

Increase backlight brightness

Decrease backlight brightness

Decrease backlight changing speed

Increase backlight changing speed

Toggles of Indicator light color

3-03. Lighting Customization

Hold Fn+F9 for 3s,enter into light custom edit mode and the indicator light ﬂash, recording the keys that you want to turn on or turn oﬀ or change its color.Then short press Fn+F9 to save and exit the edit mode. When under the other light mode, short press Fn+F9 to enter into custom light mode.

3-04. Device/Shortcut Keys

Under bluetooth mode,hold 5S to turn on/turn oﬀ the keyboard

WIN key locked , press again, unlock

Lock full key

Shut down (hold for 5s)

Sleep (hold for 5s)

Lock

Hold for 5s for factory reset

Decrease screen brightness

Increase Screen brightness

Full key / 6 key anti-ghosting

3-05. Media

Volume -

Volume +

Mute

Skip back

Play/Pause

Skip forwards

3-06. Macro key

Macro Recording Function: Press FN+F11,the lights of 5 recording and storage

Fn + F11

Fn + Y

keys Y/U/I/O/P are keep brighting. Press any of these 5 keys again, all lights oﬀ. And then record all keys that need recording one by one (the relevant key light

is bright). Finally, Press FN+F11 to save and exit.

Macro Key Switch: Press FN+Y,Y/U/I/O/P button lights on. Press Y/U/I/O/P, get into macro deﬁnition function. Press FN+Y again, Y/U/I/O/P button lights

oﬀ,macro deﬁnition function closed. To use macro deﬁnition, macro deﬁnition

recording is required ﬁrstly.

98mm100mm100mm