Hewlett Packard Enterprise WL607 User Manual
User Manual
(H3C WA2612-AGN, WL-607)
The models listed in this manual are not applicable to all regions.
Please consult the local agents for the models applicable to your
region.
Product Overview
Introduction
The H3C WA2600 Series Indoor WLAN Access Points (hereinafter
referred to as the WA2600 indoor series) are one of the 802.11n
access point (AP) product series developed by Hangzhou H3C
Technologies Co., Ltd. (hereinafter referred to as H3C). The WA2600
indoor series can serve as fat APs for networking independently, and
serve as fit APs to cooperate with wireless local area network (WLAN)
switches or access controllers to provide wireless access for WLAN
users.
Figure 1-1 shows a typical scenario of hotspot deployments using the
WA2600 indoor series.
1
Figure 1-1 Typical networking using the WA2600 indoor series
PC
PDA
PC
WA2600
WA2600
WA2600
Auditorium
Switch
Restaurant or
tea house
Switch
Hall or
information desk
Switch
Core equipment room
Switch
RADIUS
server
Wireless
NMS
AC
Figure 1-2 shows the appearance of the WA2600 indoor series.
Figure 1-2 Appearance of the WA2600 indoor series
WA2610 -AGN WA2612-AGN
Table 1-1 Physical dimensions and weight of the WA2600 indoor
series
Model Physical dimensions Weight
WA2610-AGN (H × W
× D)
42 × 181 × 127 mm
(1.65 × 7.13 × 5.00 in.)
2
1 kg (2.20 lb.)
Model Physical dimensions Weight
WA2612-AGN
(diameter × thickness)
Φ190 × 60 mm (Φ7.48
× 2.36 in.)
Hardware Configuration
The WA2600 indoor series provide two models. Table 1-2 lists the
basic configurations.
Table 1-2 Device basic configurations
Model
WA2610AGN
WA2612AGN
Protocols and
chassis material
IEEE
802.11a/b/g/n,
single-RF,
sheet metal +
plastic mold
design
IEEE
802.11a/b/g/n,
single-RF,
plastic mold
design
0.5 kg (1.10 lb.)
Antenna
consumption
External
antenna:
2.4 GHz,
gain: 2 dBi
5 GHz,
5.2 W to 6.5 W
gain: 3 dBi
Internal
antenna:
2.4 GHz,
gain: 6 dBi
5 GHz,
5.9 W to 6.5 W
gain: 7 dBi
Power
The following describes the hardware configurations and functions of
the WA2600 indoor series in detail.
3
LEDs
WA2610-AGN
Figure 1-3 LEDs on the WA2610-AGN
Table 1-3 Description of the LEDs on the WA2610-AGN
POWER Green 1
LED Color QTY Meaning
Displays the power supply status:
Steady on: The power supply
is normal.
Off/blinking: The power supply
is not well connected or the
device works abnormally.
2.4G
(Wireless
link LED)
Green 1
Displays the 2.4 GHz wireless link
status:
Off: The wireless link is not
initialized or the link is faulty.
Blinking slowly: The wireless
link works normally.
Blinking rapidly: Data is being
transmitted or received.
4
LED Color QTY Meaning
Displays the 5 GHz wireless link
status:
5G
(Wireless
link LED)
Green 1
Off: The wireless link is not
initialized or the link is faulty.
Blinking slowly: The wireless
link works normally.
Blinking rapidly: Data is being
transmitted or received.
Displays the status of the Ethernet
interface:
Steady on (green): The 1000
M Ethernet interface is in the
link-up state.
ETHERNET
(Ethernet
interface
LED)
Yellow/
green
1
Blinking (green): Data is being
transmitted or received at 1000
Mbps.
Steady on (yellow): The
10/100 Mbps Ethernet
interface is in the link-up state.
Blinking (yellow): Data is being
transmitted or received at
10/100 Mbps.
Off: The Ethernet interface is in
the link-down state.
WPS
Yellow/
green
1 Reserved for expansion use
5
WA2612-AGN
Figure 1-4 LEDs on the WA2612-AGN
Table 1-4 Description of the LEDs on the WA2612-AGN
LED Color QTY Meaning
Displays the power supply status:
Steady on: The power supply is
POWER Green 1
normal.
Off/blinking: The power supply
is not well connected or works
abnormally.
10/100M
(Ethernet
interface
LED)
Yellow 1
Displays the status of the Ethernet
interface:
Steady on: The Ethernet
interface is in the link-up state.
Off: The Ethernet interface is in
the link-down state.
Blinking: Data is being
transmitted or received at
10/100 Mbps.
6
LED Color QTY Meaning
Displays the status of the 1000 M
Ethernet interface:
1000M
(Ethernet
interface
LED)
Green 1
Steady on: The Ethernet
interface is in the link-up state.
Off: The Ethernet interface is in
the link-down state.
Blinking: Data is being
transmitted or received at 1000
Mbps.
Displays the 2.4 GHz wireless link
status:
2.4G
(Wireless
link LED)
Green 1
Off: The wireless link is not
initialized or the link is faulty.
Blinking slowly: The wireless
link works normally.
Blinking rapidly: Data is being
transmitted or received.
Displays the 5 GHz wireless link
status:
5G
(Wireless
link LED)
Green 1
Off: The wireless link is not
initialized or the link is faulty.
Blinking slowly: The wireless
link works normally.
Blinking rapidly: Data is being
transmitted or received.
Interfaces
Interfaces provided by the WA2610-AGN
The WA2610-AGN provides the following interfaces:
A console interface
An Ethernet interface
A power supply interface
7
Loading...