Information in this document is subject to change without notice.
Microsoft, Encarta, MSN, and Windows are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
Other trademarks and trade names may be used in this document to refer to either the
entities claiming the marks and names or their products.
Your HP PC includes a
a wireless network using your HP PC as a Wireless Client (Station Mode) if you already
have a wireless network running.
If you have already established a wireless network with access to the internet, you can
wirelessly connect this HP PC to your wireless network
1.1 Inventory Checklist
Included with your HP PC should be the following items for your Wireless LAN 802.11b/g
Device:
Documentation CD (Contains full User’s Manual)
Antenna (Screws to the connector on the back of your HP PC. See Chapter 2)
Printed Quick Install Guide
3Com Wireless 11g PCI Adapter. This device allows you to establish
3Com Wireless 11g PCI Adapter
5
1.2 Supported Security
In order to secure your network from passive or active intrusion key features are enabled
on Windows XP Wireless Zero Configuration :
WPA/WPA2 personal security
WEP encryption
Please see Chapter 3 for information on security settings for your Wireless LAN 802.11b/g
Device .
3Com Wireless 11g PCI Adapter
6
2 Antenna Attachment
This chapter contains instructions for antenna installation.
Important
It is assumed that there is an existing wireless LAN network with an internet connection
that has been set up on your computer prior to using Wireless LAN 802.11b/g Device .
Please consult your ISP for further information.
If you have already attached the antenna to your HP PC, please skip to Chapter 3.
1. Screw the antenna connector (A) to the antenna jack (B) located on the back of
the HP PC.
A
B
Figure 1: Antenna Attachment
2. Place the HP PC on a table or place the antenna in an elevated and open area to
achieve the best wireless performance.
A
OR
B
3Com Wireless 11g PCI Adapter
7
3 Windows XP Wireless Zero Configuration
It is necessary to complete the steps in Chapter 2, Antenna Attachment prior to using
Windows XP Wireless Network Configuration.
Note: It is assumed that there is an existing wireless network with connection to the
internet. If not, please consult your ISP for further information on establishing an
internet connection.
If you have already established a wireless network with access to the internet and you
would like to wirelessly connect this HP PC to your wireless network, use Windows XP
Zero Configuration (Windows XP Wireless Network Configuration).
3.1 Launching Microsoft Windows XP Wireless Network Configuration
To launch Windows XP Wireless Network Configuration:
1. In the Systems Tray find the Wireless Networking icon.
Note: There may be multiple
Network icons in the system
tray. Choose the one for
Wireless Network
Connection as shown.
Figure 2: Wireless Network Icon
2. Select View Available Wireless Networks and the Wireless Network Connection
dialog box will appear.
3Com Wireless 11g PCI Adapter
8
3.2 Setting the Network Key Automatically
The PC will begin functioning in Station Mode (as a Client) with your Wireless LAN
Network as soon as the Network Key is set-up.
Important
If you do not have an existing wireless network you will need to set up your Wireless
Router or Access Point prior to using your PC in Station Mode.
1. Find the Network Key (WEP Key or WPA/WPA2 Key) for your Wireless Network.
2. Select View Availabl e Wireles s Networks from the Wireless Network icon menu.
The Wireless Network Connection dialog box will appear.
Figure 3: Wireless Network Connection dialog box
3. Select the Wireless Network of your choice by clicking on its name and the entire
block will become highlighted.
4. Select Connect in the lower right corner.
3Com Wireless 11g PCI Adapter
9
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.