Hewlett Packard Enterprise SN2100M, SN2410bM, SN2700M, SN2410M, 3PAR 8000 Quick Reference Manual
...
HPE 3PAR StoreServ and StoreFabric M-series
Storage Transformation
Accelerate Data Delivery
HPE 3PAR StoreSer Storage delivers accelerated
data deliver to applications that power your
innovation agenda. Through the transformation
from disk-based storage to a unique flash-based
architecture, 3PAR allows every application to
have instant access to every port, node, and SSD.
However, with the wrong network, you may
introduce bottlenecks that prevent meeting the
accelerated performance flash arrays were
designed for.
Now, with the StoreFabric M-series switches, you’re
able to pair an all-flash design with high non-
blocking bandwidth, zero packet loss and low
300ns latency. This ensures a truly scalable solution
that provides increased density, maxim link
capacity utilization, and predictable performance
to accommodates dynamic, agile data movement
between server and flash storage with sufficient
bandwidth for the upstream network. This alleviates
bottlenecks caused by traditional networks and
unleashes the full capabilities of the 3PAR’s flashbased storage architecture.
Quick Reference Guide
Customers with smaller budgets do not lose features
Moving from tape and spinning
disks to Flash has resulted in more
than a 100 times reduction in
latency and has the potential to
drastically improve applications
response times. However, this has
resulted in shifting the bottleneck
from the disk to the network without the right network switch.
HPE M-series switches are
specifically optimized for storage
and offer the industries lowest
latency to support demanding,
high-performance storage
networks which contain a mix of
I/O workloads and applications on
a variety of storage tiers and
protocols. This ensures consistently
higher levels of performance and
system utilization so you can
achieve the full potential from
3Pars flash-based storage.
3.2mio IOPS
@<1ms Latency
3PAR StoreSer Flash Storage
M-series Ethernet Switches
300ns
port-to-port
Latency
Networking Speed Options
1GbE / 10Gbe / 25GbE / 40GbE / 50GbE / 100GbE
10ms
120µs
2.8 us
Investment Protection
Block File Object
The storage industry is in a transformation, spinning
disk are being replaced with solid state technology
which reduces latency and can places a strain on
networks. As latencies decrease, similar reductions
must happen at the network. HPE StoreFabric Mseries switches offer the lowest latency in the industry
to support the most demanding network traffic,
including a seamless upgrade in the future to
support NVMe over Ethernet fabrics.
With port speeds ranging from 1 to 100Gb
Ethernet, the M-series allows for leveraging
10GbE ports today for server and storage while
aggregating bandwidth for switch to switch
connections at greater speeds. With extra
bandwidth waiting, it’s easy to upgrade to 25,
40, 50 or even 100GbE. Helping to future-proof
your network architecture by allowing for
significant speed upgrades to the architecture
over time. Providing enterprise-level
performance with attractive economics and
outstanding ROI.
Unified Storage
Faster Storage Needs Faster Networks:
HP 3PAR StoreServ offers unified block, file, and
object storage capabilities within the same
array. Adding the ability to automatically
reconfigure for different protocols
simultaneously and changeable in the future.
As customers move to adopt cloud and
software-defined data center technologies,
this agility simplifies configurations while
helping to reduce the complexity of deploying
and managing storage.
Typical Read Latencies
M-series Ethernet Switches
• High Bandwidth
• Lowest Latencies
• Zero Packet Loss
`
Storage Optimized Ethernet Switches
Zero Packet Loss
Eliminates
avoidable packet
loss
Full line-rate speed
HPE StoreFabric M-series switches enable
Simplivity customers to achieve an affordable,
high-performance network infrastructure with
predictable performance and zero-packet-loss
regardless of the packet size.
Predictable Performance
Fair bandwidth
allocation evenly
divides traffic in all
scenarios vs
competition allowing
one stream to hog half
the bandwidth
Better Buffering
Up to 18x more
buffering
Up to 90% lower
latency in top of
rack deployments
M-series
Competition
Platforms to Suit Any Requirement
StoreFabric M-series Switches
3PAR StoreSer Storage
HPE M-series is the ideal form factor and port counts to maximize efficiency
and keep cost down, allowing a scalable network design that provides
predictable and consistent low latency and high throughput.
HPE 3PAR StoreServ and StoreFabric M-series
Quick Reference Guide
Start smaller with full features sets, and scale to hyperscale capacities and terabyte bandwidths
• Scales to over 1.8m IOPS
• 18PB usable capacity
• 2-4 node scalability
• Up to 576 SSDs
• 24 host ports
3PAR 8000
SN2100M
• Scales to over 1m IOPS
• 9PB usable capacity
• 2-4 node scalability
• Up to 480 SSDs
• 24 host ports
• 16 physical ports
• Start as low as 8 ports
• 8 port upgrade license
• 64 ports of 10/25GbE
with breakout cables
• 32 ports of 50GbE with
breakout cables
SN2410bM
SN2410M
SN2700M
• 56 physical ports
• Start as low as 24 ports
• 24 port upgrade license
• 8 ports of 40/100GbE
• 48 ports of 1 or 10GbE +
8 ports of 40 or 100 GbE
• 56 physical ports
• Start as low as 24 ports
• 24 port upgrade license
• 48 ports 10/25GbE + 8 100GbE
• 64 ports of 10/25GbE with
breakout cables
• 32 physical ports
• Start as low as 16 ports
• 16 port upgrade license
• 32 ports of up to 100GbE
• 64 ports of 10/25/50GbE with
breakout cables
3PAR 9000
• Scales to over 3.8m IOPS
• 24PB usable capacity
• 2-8 node scalability
• Up to 1152 SSDs
• 160 host ports
3PAR 20000
SN2100M
Ideal
ToR switch with
1GE
– 100GbE
connectivity options.
Redundancy in 1U
•
16x100GbE
•
32x50GbE
•
64x 10/25GbE
1U
½ 19”
wide
SKU Options:
-
16 ports (Q2F23A)
-
8 ports (Q2F24A)
-
8 ports License (Q2M94AAE)
SN2410bM
48x 1 or 10GbE ports
and 100GbE uplinks
• 48x 1 or
10GbE +
8x100GbE
1U
-
48 ports 10GbE (Q6M28A)
-
24 ports 10GbE (Q6M29A)
-
24 ports License (Q6J41AAE)
SN2410M
48x 25GbE ports &
100GbE uplinks
• 48x 25GbE
+ 8x100GbE
1U
-
48 ports 25GbE (Q2F22A)
-
24 ports 25GbE (Q6M27A)
-
24 ports License (Q6J40AAE)
SN2700m
100GbE Spine Switch
•
32x100GbE
•
64x50GbE
•
64x10/25GbE
1U
-
32 ports (Q2F21A)
-
16 ports (Q6M26A)
-
16 ports License (Q6J39AAE)
Loading...