Hewlett Packard Enterprise MSR4000, MSR4000DFS Installation Guide

MSR4000 Installation Guide

Aruba Networks

0510871-01

Statement of Conditions

In the interest of improving internal design, operation function, and/or reliability, Aruba Networks reserves the right to make changes to products described in this document without notice. Aruba Networks does not assume any liability that may occur due to the use or application of the product(s) described herein.

DISCLAIMER: LIMITATION OF LIABILITY

1．Before installation, it’s strongly recommended and requested that users pay particular attention to

the safety warnings in the sequentially detailed operation procedures within the manual. If there’s any

uncertainty or incapability of solving problems, contact the company’s customer support center. Please DO NOT incur any risk or try to verify situations by yourself. Otherwise, any consequence caused by the attempt shall be completely due to the user himself.

2．Please periodically check whether the installed MSR4000 is damaged, worn-out or poses any danger. Any actual proof, sign or phenomenon of the afore-mentioned situations should be brought to

the attention of the company at point of sale. Please DO NOT attempt to repair the product or replace any component. Otherwise, for any consequence arising out of or relating to the users’ attempt repair the product, including but not limited to damages, disuse, short circuit, fire, bodily injury, etc., the company shall not be liable.

3. Users shall purchase or use the company’s MSR4000 voluntarily. Users shall understand on their own initiative and abide voluntarily by policies, regulations or laws of their respective nation or local territories. The consequence arising out of or relating to any violation of the local laws or regulations by the user, shall be solely imputed to the user himself, and the company shall not be liable.

4. The company disclaims any and all warranties and guarantees, express, implied or otherwise, arising, with respect to the MSR4000 products or services, including but not limited to the warranty of

MSR4000 Installation Guide 1

merchandisability, the warranty of fitness for a particular purpose, and any warranty of noninfringement of the intellectual property rights of any third party. Liability of the company for loss is limited to the total amount paid to the company by the customer during the previous calendar year. The company will have no obligation or liability, whether arising in contract (including Warranty), tort (including active, passive or imputed negligence, strict liability or product liability) or otherwise for any special, incidental, consequential or indirect damages including but not limited to loss of use, loss of data, business interruption, loss of revenue, loss of business or other financial loss arising out of or in connection with any of the products or other goods or services furnished by the company under this manual, even if advised of the possibility of such damages.

5．It shall never be understood that the manual expresses or implies to any customer or any third party authorize or transfer any rights. The company reserves fully the final interpretation of the

MSR4000 and this manual.

Safety Warnings

The MSR4000 must be installed by trained professional installation technicians. All warnings below must be read and understood before installation.

General Safety Warnings

You can be killed or injured if performing antenna installation near electrical power lines. Carefully read and follow all instructions in this guide. Please be sure there are no high voltage and electronic fields nearby.

Working Aloft Warning

When working on tower or roof, individuals must wear safety belts. Tools must be tied to the individual using them. Workers below must wear safety helmets.

Lightning Activity Warning

MSR4000 Installation Guide 2

Make sure not to connect or disconnect cables during periods of lightning activity. A surge protective device should be installed to prevent potential damage from very high surges,

for instance, the peak surges caused by lightning.

Explosive Device Proximity Warning

Do not operate wireless network devices close to explosive merchandise or in explosive environments if devices are not certified for operation in such an environment, for example, in the vicinity of a gas station.

Antenna Placement Warning

Do not install any antenna near overhead power lines or other electric light, or where the antenna can come into contact with such circuits.

Antenna Selection Warning

Please use DC grounding antenna with lightning protection to prevent surge and static

electricity.

Grounding Warning

Please always remember to protect your MSR4000 system by installation of grounding lines. The ground connection must be complete before connecting power to the MSR4000 enclosure. The requirement of grounding is to make sure the resistance must be less than 5 ohm between the ground termination point to grounding tier.

Power Installation Warning

MSR4000 Installation Guide 3

The installation of the power switch must be performed by a trained professional technician. The power switch is not supplied with the MSR4000. The power cord must be assembled by a

professional installer, and the final assembly must comply with related requirements.

Solar Irradiation and High Temperature Protection

Pay attention to level of sunlight, which can increase the working temperature of MSR4000 to higher than specifications allow.

A solar shield is provided in the Aruba standard package and should be installed to protect any outdoor MSR4000. The Aruba Warrantee policy does not cover those outdoor products for which Solar shields are not installed. Please contact Aruba technical support engineers for detailed information.

RF Device Protection

Before powering up the MSR4000, the RF port must be connected to an antenna or a valid load (not included in the standard accessories for MSR4000). Otherwise, the RF module may be burned out. Aruba will not take any responsibility for such damage. For RF module with power less than 100mW, in test environment, it is allowed worked without load but should be within 30 minutes.

Protection on unused RF module

The unused RF interface must be closed via configuration command and its protective cap must be wrapped up by waterproof PVC tape to prevent from falling off. Otherwise, the RF module may be damaged. Aruba will not take any responsibility for such damage.

FCC Certificate

MSR4000 Installation Guide 4

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

REMINDER

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected. —Consult the dealer or an experienced radio/TV technician for help.

Precautions

The radiated output power of this device is below the FCC radio frequency exposure limits based on that human proximity to the antenna shall not be less than 34cm during normal operation.

IC notice

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropic radiated power (EIRP) is not more than that permitted for successful communication.

RoHS for MSR4K43N0

MSR4000 Installation Guide 5

MSR4000 Installation Guide 6

+ 15 hidden pages