HEWLETT PACKARD ENTERPRISE HP X142 LR4 User guide

HPE Comware

-Based Devices Transceiver

Modules

User Guide (40G)

P Document version: 6W107-20200417

art number: 5200-2356g

Enterprise products and services are set f orth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for techni cal or editorial errors or omissions contained herein.

Confidential computer software. Valid li cense from Hewlett Packa rd Enterprise required for posse ssion, use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer S oftware Documentation, and T echnical Data f or Commercial Items are licensed to the U.S. Gov ernment under vendor’s standard commercial license.

Links to third-party websites take you out side the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no control over and is not responsible for information outside the Hewlett Packard Enterprise website.

Acknowledgments

Intel®, Itanium®, Pentium®, Intel I nside®, and the Intel Inside logo are trademar ks of Intel Corporation in the United States and other countries.

Microsoft® and Windows® are either registe red trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Adobe® and Acrobat® are trademarks of Adobe Systems Incorpor ated. Java and Oracle are registered trademarks of Ora cle and/or its affiliates. UNIX® is a registered trademark of The Open Group.

Contents

Overview ························································································ 1

List of 40-Gigabit transceiver modules and network cables ································································· 1 About optical transceiver modules ································································································· 1

Data rate ··························································································································· 1 Transmission distance ·········································································································· 1 Central wavelength ·············································································································· 2 Fiber ································································································································· 2 Connector ·························································································································· 3 Optical parameters ·············································································································· 4

QSFP+ transceiver modules ······························································· 5

QSFP+ optical transceiver modules that use MPO connectors ····························································· 5

Models and specifications ····································································································· 5

QSFP+ optical transceiver modules that use LC connectors ································································ 6

Models and specifications ····································································································· 6

QSFP+ BIDI optical transceiver modules ························································································· 7

Models and specifications ····································································································· 7

QSFP+ copper cables ················································································································· 8

Models and specifications ····································································································· 8

QSFP+ to SFP+ copper cables ····································································································· 8

Models and specifications ····································································································· 9

QSFP+ active optical cables ········································································································· 9

Models and specifications ··································································································· 10

CFP transceiver modules ································································· 11

Models and specifications ··································································································· 11

40-Gigabit Ethernet transceiver modules compatibility matrix ··················· 12

40-Gigabit Ethernet transceiver modules ······················································································· 12 Switching minimum software release requirements ········································································· 13

HPE FlexFabric 12900E switch series minimum software version requirements ······························ 13 HPE FlexFabric 12900 switch series minimum software version requirements ································ 20 HPE FlexFabric 7900 switch series minimum software version requirements ································· 24 HPE 6125XLG Blade switch series minimum software version requirements ·································· 26 HPE FlexFabric 5980 switch series minimum software version requirements ································· 27 HPE FlexFabric 5950 switch series minimum software version requirements ································· 27 HPE FlexFabric 5945 switch series minimum software version requirements ································· 32 HPE FlexFabric 5940 switch series minimum software version requirements ································· 34 HPE FlexFabric 5930 switch series minimum software version requirements ································· 39 HPE FlexFabric 5900 switch series minimum software version requirements ································· 46 HPE FlexFabric 5710 switch series minimum software version requirements ································· 51 HPE FlexFabric 5700 switch series minimum software version requirements ································· 53

Document conventions and icons ······················································ 57

Conventions ··························································································································· 57 Network topology icons ············································································································· 58

Support and other resources ···························································· 59

Accessing Hewlett Packard Enterprise Support ·············································································· 59 Accessing updates ··················································································································· 59

Websites ························································································································· 60 Customer self repair ··········································································································· 60 Remote support ················································································································ 60 Documentation feedback ···································································································· 60

Index ··························································································· 62

i

Overview

Transceiver module type

Connector type

QSFP+ transceiver modules

NOTE:

•

transceiver modules and cables, contact HP E technical support or

•

transceiver modules and cables vary by HPE device s. For the transceiver modules

compatibility matrix".

This document describes 40-Gigabit transceiver modules and cables available for HPE Comware-based devices.

List of 40-Gigabit transceiver modules and network cables

QSFP+ optical transceiver modul e MPO/LC QSFP+ copper cable (for interconnecting QSFP+ ports) N/A QSFP+ to SFP+ copper cable (for connect i ng one 40-Gigabit QSFP+

port to four 10-Gigabit SFP+ ports) QSFP+ active optical cable

CFP transceiver modules

40-Gigabit CFP optical transceiver module LC

N/A

HPE 40-Gigabit transceiver modules and cables a re subject to change over time. For the most

recent list of HPE 40-Gigabit marketing staff.

The available

and cables available for a device, see the install ation guide for the device. For the 40-Gigabit transceiver modules and cables for a switch, see "40-Gigabit Ethernet transceiver modules

About optical transceiver modules

Optical transceiver modules (also called fiber transceiver modules) transmit signals over optical fibers and are suitable for long distance transmission.

The following information explains the major specifications of a fiber transceiver module.

Data rate

Data rate is the number of bits transmitted per second. Data rate is typically measured in Gigabits per second (Gbps).

Transmission distance

The transmission distance of optical t ran sceiver modules is divided into short a nd long -range ty pes. Typically, a distance of 2 km (1.24 miles) or below is short-range ty pe and a dist ance of 10 km (6.21 miles) is long-range type.

1

Transmission distances supported by optical transceiver modules are mainly limited by signal

Fiber grade

Fiber diameter (μm)

Modal bandwidth at 850 nm (MHz*km)

attenuation and dispersion suffered during the transmission of fiber signals over fibers.

• Signal attenuation occurs because of absorption, dispersion, and leakage over the media as light travels through optical fibers. This attenuation increases in direct ratio to transmission distance.

• Dispersion occurs because a fiber transmits light with dif ferent wavelengths at different speeds. Light with different wavelengths r eaches the receiving end at different t ime. This results in spread and blurred pulses.

Central wavelength

Central wavelength represents the wave band used for optical signal transmission. The following central wavelengths (wave bands) are available for common optical transceiver modules: 850 nm, 1310 nm, and 1550 nm.

• The 850 nm wave band is used for short-reach transmission.

• The 1310 nm and 1550 nm wave bands are used for middle-reach an d long-haul transmissions.

Fiber

Fiber types

Fibers are classified into multimode fibers and single-mode fibers.

• Multimode fibers Multimode fibers (MMFs) have thicker fiber cor es than single-mode fibers and can transport

light in multiple modes. However, the intermo dal dispersion is greater and worsens as the transmission distance increases.

Multimode fibers can be classified into mult i ple grades according to their diameters and modal bandwidth, as shown in Table 1. The modal bandwidth is a comprehensive index that reflects the optical characteristics of a multim ode fiber. The modal bandwidth of a multimode fiber is equal to the modulation freque ncy of the maximum modulation f requency pulse that can pass a fiber × the fiber length.

International Telecommunication Union (IT U) defines multimode fiber types in its G series standards. The m ost commonly used multimode fiber is defined in the ITU G.651 standard. The G.651-compliant fiber transmits light in th e wav el ength ran ge of 8 00 nm t o 90 0 nm or 1 200 nm to 1350 nm.

Table 1 Multimode fiber grades

OM3 50/125 2000 OM4 50/125 4700

• Single-mode fibers Single-mode fibers (SMFs) have a small core size (typically 9 μm or 10 μm) and can transmit

light in only one mode. Single-mode fibers suff er little intermodal di spersion and are suitabl e for long-haul communication. Single-mode fibers transmit light at the central wavelength of 1310 nm or 1550 nm.

Telecommunication Industries Alliance (TIA)/Electronic Industries Alliance (EIA) defines that single-mode fibers use yellow outer jackets wit h an " SM" mark.

ITU defines single-mode fiber types in its G series standards. The most commonly used single-mode fibers are defined in ITU G.652 and G.655 standards. Table 2 describes features of the G.652 and G.655-compliant fibers.

2

Table 2 Features of G.652 and G.655-compliant fibers

Single-mode fiber type

Wavelength (nm)

Features

Applications

CAUTION:

Cover the connector with a dust cap when it is not connected to optical fibers.

G.652-compliant fiber (standard single-mode fiber)

G.655-compliant fiber (non-zero dispersion shifted fiber)

Fiber diameter

Fiber diameter is expressed as core diameter/cladding diameter, in μm. For example, 9/125 μm represents a fiber core diameter of 9 μm and a fiber cladding diameter of 125 μm.

As a best practice, use the following fiber diamet ers for the HPE Comware-based devices:

• G.652 standard single-mode fiber—9/125 μm.

• G.655 single-mode fiber—9/125 μm.

• G.651 standard multimode fiber—50/125 μm.

Connector

Connectors connect transceiver modules to the transmission media. The following information describes the connectors used by the transceiver m odules for the HPE Comware-based devices.

• 1260 to 1360

• 1530 to 1565

1530 to 1565

Zero dispersion at 1310 nm.

Near-zero dispersion around 1550 nm.

Connecting transceiver modules with a central wavelength of 1310 nm or 1550 nm.

1550-nm wavelength-division multiplexing (WDM) transmissions.

Lucent connector or local connector (LC)

Figure 1 LC connector

Multi-fiber Push On connector (MPO)

Figure 2 MPO connector

HPE transceiver modules use only female M PO connectors, whic h have guide holes in the e nd face.

3

MPO connectors are classified into the followin g types based on the polish type:

Fiber 1 Fiber 12Key

Guide hole

Fiber 1 Fiber 12Key

Guide hole

Fiber 13 Fiber 24

• Physical contact (PC)—End face polished flat.

• Angle-polished contact (APC)—End face polished with an angle, typically 8°.

MPO connectors are available with 12 fibers (see Figure 3) or 24 fibers (see Figure 4).

Figure 3 End face of a 12-fiber connector

Figure 4 End face of a 24-fiber connector

Optical parameters

The following are the major optical parameters:

• Transmit power —Transmit power is the power at which the transmitter of an optical transceiver module transmits optical signals, in dBm.

• Receive power—Receive power is the power at whic h the re ceiver of a optical transceiver module receives optical signals, in dBm.

The transceiver module specifications in this guide provide the average transmit and receive power ranges.

4

QSFP+ transceiver modules

(nm)

(µm)

(MHz*km)

Optical parameters (dBm)

Transmit power

Receive power

QSFP+ optical transcei ver modules that use MPO connectors

Figure 5 QSFP+ optical transceiver module that uses MPO connectors

Models and specifications

QSFP+ optical transceiver modules provide a transmission rate of 40 Gbps and use MPO connectors.

Table 3 Specifications for QSFP+ optical transceiver modules that use MPO connectors (1)

Product code

JG325B

JG709A

HPE description

HPE X140 40G QSFP+ MPO SR4 Transceiver

HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver

Central wavelength

850 MMF 50/125

Fiber mode

Fiber diameter

Modal bandwidth

2000

4700

2000

4700

Transmission distance

100 m (328.08 ft)

150 m (492.12 ft)

300 m (984.25 ft)

400 m (1312.33 ft)

Table 4 Specifications for QSFP+ optical transceiver modules that use MPO connectors (2)

Product code

JG325B

JG709A

HPE description Connector

HPE X140 40G QSFP+ MPO SR4 Transceiver

HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver

MPO (PC polished, 12-fiber)

–7.6 to 0 –9.5 to +2.4

–7.6 to 0 –9.9 to +2.4

5

NOTE:

•

The 40G QSFP+ ports of the JG325B and JG709A optical transceiver modules can be split into

optical

module and SFP+ optical transceiver modules to be co nne cted mu st be the same in

•

installation guide that comes with the device.

(nm)

(µm)

(MHz*km)

Optical parameters (dBm)

Transmit power

Receive power

HPE X140 40G QSFP+ LC LR4L 2km

four channels. You can connect a 40G QSFP+ port to four 10G SFP+ ports. The QSFP+ transceiver specifications, including central wavelength and fiber type.

Support for QSFP+ port splitting depends on the device model. For more information, see the

QSFP+ optical transceiver modules that use LC connectors

Figure 6 QSFP+ optical transceiver module that uses LC connectors

Models and specifications

QSFP+ optical transceiver modules pro vide a tra nsmissi on rate of 40 Gb ps and use LC connectors.

Table 5 Specifications for QSFP+ transceiver modules that use LC connectors (1)

Product code

JL286A

JG661A

JL306A

HPE description

HPE X140 40G QSFP+ LC LR4L 2km SM Transceiver

HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver Module

HPE X140 40G QSFP+ LC ER4 40km SM Transceiver

Central wavelength

Four lanes:

• 1271

• 1291

• 1311

• 1331

Four lanes:

• 1271

• 1291

• 1311

• 1331

Four lanes:

• 1271

• 1291

• 1311

• 1331

Fiber mode

SMF 9/125 N/A

Fiber diameter

Modal bandwidth

Transmission distance

2 km (1.24 miles)

10 km (6.21 miles)

40 km (24.85 miles)

Table 6 Specifications for QSFP+ transceiver modules that use LC connectors (2)

Product code HPE description

JL286A

–10 to +2.3 per lane –11.5 to +2.3 per lane

6

Product code HPE description

Optical parameters (dBm)

Transmit power

Receive power

SM Transceiver

(nm)

(µm)

(MHz*km)

Optical parameters (dBm)

Transmit power

Receive power

JG661A

JL306A

HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver Module

HPE X140 40G QSFP+ LC ER4 40km SM Transceiver

–7 to +2.3 per lane –13.7 to +2.3 per lane

–2.7 to +4.5 per lane –21.2 to –4.5 per lane

QSFP+ BIDI optical transceiver modules

Figure 7 QSFP+ BIDI optical transceiver module

Models and specifications

QSFP+ BIDI transceiver modules provide a transmission rat e of 40 Gbps and use LC connectors.

Table 7 Specifications for QSFP+ BIDI transceiver modules (1)

Product code

JL251A

JH375A (end of sale)

HPE description

HPE X140 40G QSFP+ LC BiDi 100m MM Transceiver

HPE X140 40G QSFP+ LC SWDM4 300m MM Transceiver

Central wavelength

Two lanes:

• 850

• 900

Four lanes:

• 850

• 880

• 910

• 940

Fiber mode

MMF 50/125

Fiber diameter

Modal bandwidth

2000

4700

2000 240m (787.40 ft)

4700

Transmission distance

100 m (328.08 ft)

150 m (492.12 ft)

350m (1148.29 ft)

Table 8 Specifications for QSFP+ BIDI transceiver modules (2)

Product code HPE description

JL251A

HPE X140 40G QSFP+ LC BiDi 100m MM Transceiver

–4 to +5 –6 to +5

7

Product code HPE description

Optical parameters (dBm)

Transmit power

Receive power

NOTE:

The operating case temperature of

JL251A is in the range of 10°C to 70° C (50°F to 158°F ). The performance, signal transmitting and receiving capability, and link status of the transceiver module deteriorate when the case temperature is out of this range.

code

JH375A

HPE X140 40G QSFP+ LC SWDM4 300m MM Transceiver

the

QSFP+ copper cables

Figure 8 QSFP+ copper cable

–7.6 to +3 per lane –9 to +3 per lane

Models and specifications

Table 9 Specifications for QSFP+ copper cables

Product

JG326A

JG327A

JG328A

HPE description Cable length Data rate Remarks

HPE X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable

HPE X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable

HPE X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable

1 m (3.28 ft)

3 m (9.84 ft)

5 m (16.40 ft)

QSFP+ to SFP+ copper cables

One end of a QSFP+ to SFP+ copper cable provides a 40-Gigabit QSFP + module, and the other end provides four 10-Gigabit SFP+ modules.

40 Gbps

Used for interconnecting 40-Gigabit QSFP+ ports.

8

Figure 9 QSFP+ to SFP+ copper cable

code

Models and specifications

Table 10 Specifications for QSFP+ to SFP+ copper cables

Product

JG329A

JG330A

JG331A

HPE description Cable length Data rate Remarks

HPE X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cabl e

HPE X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cabl e

HPE X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cabl e

QSFP+ active optical cables

Figure 10 QSFP+ active optical cable

1 m (3.28 ft)

3 m (9.84 ft)

5 m (16.40 ft)

40 Gbps

Used for connecting a 40-Gigabit QSFP+ port to four 10-Gigabit SFP+ ports.

9

Models and specifications

code

Table 11 Specifications for QSFP+ active optical cables

Product

JL287A HPE X2A0 40G QSFP+ to QSFP+ 7m Active Optical Cable 7 m (22.97 ft)

JL289A HPE X2A0 40G QSFP+ to QSFP+ 20m Active Optical Cable 20 m (65.62 ft)

HPE description Cable length Data rate

40 Gbps JL288A HPE X2A0 40G QSFP+ to QSFP+ 10m Active Optical Cable 10 m (32.81 ft)

10

CFP transceiver modules

(nm)

(µm)

Optical parameters (dBm)

Transmit power

Receive power

Figure 11 CFP transceiver module

Models and specifications

CFP transceiver modules provide a t ransmission rate of 40 Gbps and use LC connectors.

Table 12 Specifications for CFP transceiver modules (1)

Product code

JC857A

HPE description

HPE X140 40G CFP LC LR4 10km SM Transceiver

Central wavelength

Four lanes:

• 1271

• 1291

• 1311

• 1331

Table 13 Specifications for CFP transceiver modules (2)

Product code

JC857A

HPE description

HPE X140 40G CFP LC LR4 10km SM Transceiver

Fiber mode

SMF 9/125

–4 to +3 per lane –11.5 to +3 per lane

Fiber diameter

Transmission distance

10 km (6.21 miles)

11

40-Gigabit Ethernet transceiver modules

Product code

Transceiver module

Description

HPE X2A0 40G QSFP+ to QSFP+

LSWM2QSFPPF,40G QSFP+ to 40G QSFP+

compatibility matrix

40-Gigabit Ethernet transceiver modules

Before you install, configure, or upgrade a device with HPE 40-Gigabit Ethernet transceiver modules, always see the device's release notes for latest informat ion. This comp atibility matri x does not replace or supersede the release notes.

Table 14 40 Gigabit Ethernet transceiver modules

QSFP+

40G QSFP+

JG661A

JG709A

HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver

HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver

Transceiver,LSTM2QSFP0,40GBASE QSFP+ Optical Transceiver Module,(40GBASE-LR4,10km,LC)

40G QSFP+ Transceiver,LSWM2QSFPP,40GBASE QSFP+ Optical Transceiver Module,(40GBASE-CSR4,300m,MPO)

JG325B

JL251A

JL286A

JL306A

JG326A

JG327A

JG328A

JG329A

JG330A

JG331A

HPE X140 40G QSFP+ MPO SR4 Transceiver

HPE X140 40G QSFP+ LC BiDi 100m MM Transceiver

HPE X140 40G QSFP+ LC LR4L 2km SM Transceiver

HPE X140 40G QSFP+ LC ER4 40km SM Transceiver

HPE X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable

HPE X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable

HPE X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable

HPE X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable

HPE X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable

HPE X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable

LSWM4QSFPP,QSFP+ 40G Optical Transceiver Module,(850nm,100m,SR4)

LSWM1QSFPPJ,40G QSFP+ BiDi Transceiver,(850nm,100m,SR)

LSXM2QSFPPD,40G QSFP+ Optical Transceiver Module,(1310nm, 2km,LR4L,LC)

LSVM2QSFPPJ,40G QSFP+ Optical Transceiver Module,(1310nm,40km,ER4,WDM,LC)

LSWM2QSTK0,40G QSFP+ Cable,1m

LSWM2QSTK1,40G QSFP+ Cable,3m

LSWM2QSTK2,40G QSFP+ Cable,5m

LSWM2QSTK3,40G QSFP+ to 4x10G SFP+ Cable,1m

LSWM2QSTK4,40G QSFP+ to 4x10G SFP+ Cable,3m

LSWM2QSTK5,40G QSFP+ to 4x10G SFP+ Cable,5m

JL287A

JL288A

HPE X2A0 40G QSFP+ to QSFP+ 7m Active Optical Cable

12

LSWM2QSFPPE,40G QSFP+ to 40G QSFP+ Active Optical Cable,7m

Product code

Transceiver module

Description

10m Active Optical Cable

Active Optical Cable,10m

JL289A

release

support

version

HPE X2A0 40G QSFP+ to QSFP+ 20m Active Optical Cable

LSWM2QSFPPG,40G QSFP+ to 40G QSFP+ Active Optical Cable,20m

Switching minimum software release requirements

HPE FlexFabric 12900E switch series minimum software version requirements

Minimum software

Switch or module Transceiver module (Product code)

HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Xcvr (JG661A)

HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Xcvr (JG709A)

HPE X140 40G QSFP+ MPO SR4 Xcvr (JG325B) YES R2606 HPE X140 40G QSFP+ LC BiDi 100m MM Xcvr

(JL251A) HPE X140 40G QSFP+ LC LR4L 2km SM Xcvr (JL286A) YES R2606

HPE FlexFabric 12900E 48-port 1/10GbE SFP+ 2-port 100GbE QSFP28 HB Module (JH360A)

HPE X140 40G QSFP+ LC ER4 40km SM Xcvr (JL306A) YES R2606 HPE X240 40G QSFP+ QSFP+ 1m Direct Attach Copper

Cable (JG326A) HPE X240 40G QSFP+ QSFP+ 3m Direct Attach Copper

Cable (JG327A) HPE X240 40G QSFP+ QSFP+ 5m Direct Attach Copper

Cable (JG328A) HPE X2A0 40G QSFP+ to QSFP+ 7m Active Optical

Cable (JL287A) HPE X2A0 40G QSFP+ to QSFP+ 10m Active Optical

Cable (JL288A)

DDM

YES R2606

YES

NO

Release

R2606

HPE FlexFabric 12900E 48-port 40GbE QSFP+ HB Module (JH359A)

HPE X2A0 40G QSFP+ to QSFP+ 20m Active Optical Cable (JL289A)

HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Xcvr (JG661A)

HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Xcvr (JG709A)

HPE X140 40G QSFP+ MPO SR4 Xcvr (JG325B) YES R2609 HPE X140 40G QSFP+ LC BiDi 100m MM Xcvr

(JL251A)

13

NO

YES

NO R2609

R2606

Minimum software

release

support

version

Switch or module Transceiver module (Product code)

HPE X140 40G QSFP+ LC LR4L 2km SM Xcvr (JL286A) YES R2606 HPE X140 40G QSFP+ LC ER4 40km SM Xcvr (JL306A) YES R2609 HPE X240 40G QSFP+ QSFP+ 1m Direct Attach Copper

Cable (JG326A) HPE X240 40G QSFP+ QSFP+ 3m Direct Attach Copper

Cable (JG327A) HPE X240 40G QSFP+ QSFP+ 5m Direct Attach Copper

Cable (JG328A) HPE X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach

Copper Splitter Cable (JG329A) HPE X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach

Copper Splitter Cable (JG330A) HPE X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach

Copper Splitter Cable (JG331A) HPE X2A0 40G QSFP+ to QSFP+ 7m Active Optical

Cable (JL287A) HPE X2A0 40G QSFP+ to QSFP+ 10m Active Optical

Cable (JL288A)

DDM

NO R2606

NO

Release

R2606

HPE FlexFabric 12900E 36-port 100GbE QSFP28 HB Module (JH357A)

HPE X2A0 40G QSFP+ to QSFP+ 20m Active Optical Cable (JL289A)

HPE QSFP/SFP+ Adaptor Kit (655874-B21) NO R2609 HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Xcvr

(JG661A) HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m

Xcvr (JG709A) HPE X140 40G QSFP+ MPO SR4 Xcvr (JG325B) YES R2606 HPE X140 40G QSFP+ LC BiDi 100m MM Xcvr

(JL251A) HPE X140 40G QSFP+ LC LR4L 2km SM Xcvr (JL286A) YES R2606 HPE X140 40G QSFP+ LC ER4 40km SM Xcvr (JL306A) YES R2606 HPE X240 40G QSFP+ QSFP+ 1m Direct Attach Copper

Cable (JG326A) HPE X240 40G QSFP+ QSFP+ 3m Direct Attach Copper

Cable (JG327A) HPE X240 40G QSFP+ QSFP+ 5m Direct Attach Copper

Cable (JG328A) HPE X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach

Copper Splitter Cable (JG329A)

NO

YES

NO

R2606

HPE X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable (JG330A)

HPE X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable (JG331A)

14

NO

R2606

Minimum software

release

support

version

Switch or module Transceiver module (Product code)

HPE X2A0 40G QSFP+ to QSFP+ 7m Active Optical Cable (JL287A)

HPE X2A0 40G QSFP+ to QSFP+ 10m Active Optical Cable (JL288A)

HPE X2A0 40G QSFP+ to QSFP+ 20m Active Optical Cable (JL289A)

HPE QSFP/SFP+ Adaptor Kit (655874-B21) NO R2609 HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Xcvr

(JG661A) HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m

Xcvr (JG709A) HPE X140 40G QSFP+ MPO SR4 Xcvr (JG325B) YES R2606 HPE X140 40G QSFP+ LC BiDi 100m MM Xcvr

(JL251A) HPE X140 40G QSFP+ LC LR4L 2km SM Xcvr (JL286A) YES R2609 HPE X140 40G QSFP+ LC ER4 40km SM Xcvr (JL306A) YES R2609 HPE X240 40G QSFP+ QSFP+ 1m Direct Attach Copper

Cable (JG326A)

DDM

NO

YES

NO

Release

R2606

R2609

R2606

HPE FlexFabric 12900E 18-port 100G QSFP28/18-port 40G QSFP+ HB Module (JH422A)

HPE FlexFabric 12900E 36-port 40G QSFP+ HB Module (JH437A)

HPE X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable (JG327A)

HPE X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable (JG328A)

HPE X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable (JG329A)

HPE X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable (JG330A)

HPE X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable (JG331A)

HPE X2A0 40G QSFP+ to QSFP+ 7m Active Optical Cable (JL287A)

HPE X2A0 40G QSFP+ to QSFP+ 10m Active Optical Cable (JL288A)

HPE X2A0 40G QSFP+ to QSFP+ 20m Active Optical Cable (JL289A)

HPE QSFP/SFP+ Adaptor Kit (655874-B21) NO R2609 HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Xcvr

(JG661A) HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m

Xcvr (JG709A) HPE X140 40G QSFP+ MPO SR4 Xcvr (JG325B) YES R2606 HPE X140 40G QSFP+ LC BiDi 100m MM Xcvr

(JL251A)

NO

YES

NO

R2606

R2609

R2606

15

Minimum software

release

support

version

Switch or module Transceiver module (Product code)

HPE X140 40G QSFP+ LC LR4L 2km SM Xcvr (JL286A) YES R2606 HPE X140 40G QSFP+ LC ER4 40km SM Xcvr (JL306A) YES R2609 HPE X240 40G QSFP+ QSFP+ 1m Direct Attach Copper

Cable (JG326A) HPE X240 40G QSFP+ QSFP+ 3m Direct Attach Copper

Cable (JG327A) HPE X240 40G QSFP+ QSFP+ 5m Direct Attach Copper

Cable (JG328A) HPE X2A0 40G QSFP+ to QSFP+ 7m Active Optical

Cable (JL287A) HPE X2A0 40G QSFP+ to QSFP+ 10m Active Optical

Cable (JL288A) HPE X2A0 40G QSFP+ to QSFP+ 20m Active Optical

Cable (JL289A) HPE QSFP/SFP+ Adaptor Kit (655874-B21) NO R2609 HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Xcvr

(JG661A) HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m

Xcvr (JG709A)

DDM

NO

YES

Release

R2606

HPE FlexFabric 12900E 6-port 100G QSFP28/6-port 40G QSFP+ HB Module (JH436A)

HPE X140 40G QSFP+ MPO SR4 Xcvr (JG325B) YES R2606 HPE X140 40G QSFP+ LC LR4L 2km SM Xcvr (JL286A) YES R2606 HPE X140 40G QSFP+ LC ER4 40km SM Xcvr (JL306A) YES E2609 HPE X240 40G QSFP+ QSFP+ 1m Direct Attach Copper