HEWLETT PACKARD ENTERPRISE HP 513048GPP4SPE Datasheet
QuickSpecs
HPE FlexNetwork 5130 EI Switch Series
Overview
Page 1
HPE FlexNetwork 5130 EI Switch Series
The HPE FlexNetwork 5130 EI Switch Series comprises Gigabit Ethernet switches that support static and RIP Layer 3 routing,
diversified services, and IPv6 forwarding, as well as provide four 10
Unique Intelligent Resilient Fabric (IRF) te
which increases network resilience, performance, and availability, while reducing operational complexity. These switches prov
Gigabit Ethernet access and can be used a
High availability, simplified management, and comprehensive security control policies are among the key features that disting
this series.
HPE FlexNetwork 5130 24G 4SFP+ EI Switch (JG932A)
HPE FlexNetwork 5130 24G SFP 4SFP+ EI Switch (JG933A)
-Gigabit Ethernet (10GbE) interfaces.
chnology creates a virtual fabric by managing several switches as one logical device,
ide
t the edge of a network or to connect server clusters in small data centers.
uish
QuickSpecs
HPE FlexNetwork 5130 EI Switch Series
Overview
Page 2
HPE FlexNetwork 5130 48G 4SFP+ EI Switch (JG934A
HPE FlexNetwork 5130 24G PoE+ 4SFP+ (370W) EI Switch (JG936A)
HPE FlexNetwork 5130 48G PoE+ 4SFP+ (370W) EI Switch (JG937A)
QuickSpecs
HPE FlexNetwork 5130 EI Switch Series
Overview
Page 3
HPE FlexNetwork 5130 24G POE+ 2SFP+ 2XGT (370W) EI Switch (JG940A)
HPE FlexNetwork 5130 48G POE+ 2SFP+ 2XGT (370W) EI Switch (JG941A)
Models
HPE FlexNetwork 5130 24G 4SFP+ EI Switch
JG932A
HPE FlexNetwork 5130 24G SFP 4SFP+ EI Switch
JG933A
HPE FlexNetwork 5130 48G 4SFP+ EI Switch
JG934A
HPE FlexNetwork 5130 24G PoE+ 4SFP+ (370W) EI Switch
JG936A
HPE FlexNetwork 5130 48G PoE+ 4SFP+ (370W) EI Switch
JG937A
HPE FlexNetwork 5130 24G POE+ 2SFP+ 2XGT (370W) EI Switch
JG940A
HPE FlexNetwork 5130 48G POE+ 2SFP+ 2XGT (370W) EI Switch
JG941A
Key features
• Fixed 10GbE ports for high-speed stacking or uplinks
• Excellent manageability
• Support for multiple services
• Comprehensive security control policies
• Diversified quality of service (QoS) policies
QuickSpecs
HPE FlexNetwork 5130 EI Switch Series
Standard Features
Page 4
Features and benefits
Software-defined networking
(routing decision) paths
Quality of Service
Supports Committed Access Rate (CAR) and line rate
Connectivity
status of the link between two devices
Resiliency and high availability
LACP for automatic load balancing and high availability; can eliminate the need for complex protocols like
Spanning Tree Protocol, Equal-Cost Multipath (ECMP), or VRRP, thereby simplifying network operation
• OpenFlow
Supports OpenFlow 1.3 specification to enable SDN by allowing separation of the data (packet forwarding) and control
(QoS)
• Broadcast control
Allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
• Advanced classifier-based QoS
Classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting
priority level and rate limit to selected traffic on a port, VLAN, or whole switch
• Powerful QoS feature
Supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), and SP+WRR
• Traffic policing
• Auto-MDIX
Automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
• Flow control
Provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations
• High-density connectivity
Provides up to 48 fixed 10/100/1000BASE-T ports in a Layer 2/Layer 3 switch
• IEEE 802.3at Power over Ethernet (PoE+) support
Simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in
supplying local power at each access point location
• Ethernet operations, administration and maintenance (OAM)
Detects data link layer problems that occurred in the "last mile" using the IEEE 802.3ah OAM standard; monitors the
• Separate data and control paths
Separates control from services and keeps service processing isolated; increases security and performance
• External redundant power supply
Provides high reliability
• Smart link
Allows 100 ms failover between links
• Spanning Tree/MSTP, RSTP
Provides redundant links while preventing network loops; supports up to 64 instances of MSTP
• Intelligent Resilient Fabric (IRF)
Creates virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router;
switches do not have to be co-located and can be part of a disaster-recovery system; servers or switches can be attached
using standard
QuickSpecs
HPE FlexNetwork 5130 EI Switch Series
Standard Features
Page 5
Layer 3 routing
loop protection
Management
everages HWTACACS to link a custom list of CLI commands to an individual network administrator's login; also provides
support for third-party devices enables network administrators to centrally manage all network elements with a variety of
• Static IP routing
Provides manually configured routing for both IPv4 and IPv6 networks
• Routing Information Protocol (RIP)
Uses a distance vector algorithm with UDP packets for route determination; supports RIPv1 and RIPv2 routing; includes
• Remote configuration and management
Enables configuration and management through a secure Web browser or a CLI located on a remote device
• Manager and operator privilege levels
Provides read-only (operator) and read/write (manager) access on CLI and Web browser management interfaces
• Command authorization
L
an audit trail
• Secure Web GUI
Provides a secure, easy-to-use graphical interface for configuring
the module via HTTPS
• Multiple configuration files
Stores easily to the flash image
• Complete session logging
Provides detailed information for problem identification and resolution
• Remote monitoring (RMON)
Uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a
private alarm extension group
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
Advertises and receives management information from adjacent devices on a network, facilitating easy mapping by
network management applications
• sFlow (RFC 3176)
Provides scalable ASIC-based wirespeed network monitoring and accounting with no impact on network performance; this
allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and
real-time network monitoring purposes
• Management VLAN
Segments traffic to and from management interfaces, including
CLI/telnet, a Web browser interface, and SNMP
• Remote intelligent mirroring
Mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the
network
• Device Link Detection Protocol (DLDP)
Monitors a cable between two compatible switches and shuts down the ports on both ends if the cable is broken, which
prevents network problems such as loops
• IPv6 management
Provides future-proof networking because the switch is capable of being managed whether the attached network is
running IPv4 or IPv6; supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, syslogv6, FTPv6, SNMPv6, DHCPv6, and
RADIUS for IPv6
• Troubleshooting
Ingress and egress port monitoring enables network problem-solving; virtual cable tests provide visibility into cable
problems
• HPE Intelligent Management Center (IMC)
Integrates fault management, element configuration, and network monitoring from a central vantage point; built-in
QuickSpecs
HPE FlexNetwork 5130 EI Switch Series
Standard Features
Page 6
automated tasks, including discovery, categorization, baseline configurations, and software images; the software also
tool with secure access
Security
Eases switch management security administration by using a password authentication server
Performance
TCAM-based ACL implementation
provides configuration comparison tools, version tracking, change alerts, and more
• Network Management
SNMP v1/v2c/v3, MIB-II with Traps, and RADIUS Authentication Client MIB (RFC 2618); embedded HTML management
• Access control lists (ACLs)
Provides IP Layer 2 to Layer 4 traffic filtering; supports global ACL, VLAN ACL, port ACL, and IPv6 ACL
• IEEE 802.1X
Industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a
RADIUS server
• MAC-based authentication
Client is authenticated with the RADIUS server based on the client's MAC address
• Identity-driven security and access control
− Per-user ACLs
Permits or denies user access to specific network resources based on user identity and time of day, allowing
multiple types of users on the same network to access specific network services without risking network security
or providing unauthorized access to sensitive data
− Automatic VLAN assignment
Automatically assigns users to the appropriate VLAN based on their identities
• Secure management access
Delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, HTTPS and/or SNMPv3
• Secure FTP/ SCP
Allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a
switch configuration file
• Guest VLAN
Provides a browser-based environment to authenticated clients that is similar to IEEE 802.1X
• Port security
Allows access only to specified MAC addresses, which can be learned or specified by the administrator
• Port isolation
Secures and adds privacy, and prevents malicious attackers from obtaining user information
• STP BPDU port protection
Blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
• STP root guard
Protects the root bridge from malicious attacks or configuration mistakes
• DHCP protection
Blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
• IP source guard
Helps prevent IP spoofing attacks
• Dynamic ARP protection
Blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
• RADIUS/HWTACACS
• Nonblocking architecture
Up to 176 Gb/s nonblocking switching fabric provides wirespeed switching with up to 143 million pps throughput
• Hardware-based wirespeed access control lists (ACLs)
Help provide high levels of security and ease of administration without impacting network performance with a feature-rich
QuickSpecs
HPE FlexNetwork 5130 EI Switch Series
Standard Features
Page 7
Device support
Detects and provides power to prestandard PoE devices such as wireless LAN access points and IP phones
Convergence
Prevents flooding of IP multicast traffic
Additional information
and security platforms leverage the Comware OS, a common unified modular operating system
Energy Efficient Ethernet (EEE) Support
R
Layer 2 switching
Improves the performance of large data transfers; supports frame size of up to 10K-bytes
• Prestandard PoE Support
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
Facilitates easy mapping using network management applications with LLDP automated device discovery protocol
• LLDP-MED
Is a standard extension that automatically configures network devices, including LLDP-capable IP phones
• LLDP-CDP compatibility
Receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation
• IEEE 802.3at Power over Ethernet (PoE+)
Provides up to 30 W per port that allows support of the latest PoE+-capable devices such as IP phones, wireless access
points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical
cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments
• PoE allocations
Supports multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user-specified) to allocate PoE power for more
efficient energy savings
• Voice VLAN
Automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance
• IP multicast snooping (data-driven IGMP)
• Green IT and power
Improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and
utilizes variable-speed fans, reducing energy costs
• Green initiative support
Provides support for RoHS and WEEE regulations
• Unified Hewlett Packard Enterprise Comware operating system with modular architecture
Provides an easy-to-enhance-and-extend feature set, which doesn't require whole-scale changes; all switching, routing,
educes power consumption in accordance with IEEE 802.3az
• 16K MAC address table
Provides access to many Layer 2 devices
• VLAN support and tagging
Supports IEEE 802.1Q with 4,094 simultaneous VLAN IDs
• IEEE 802.1ad QinQ and selective QinQ
Increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a highspeed campus or metro network
• 10GbE port aggregation
Allows grouping of ports to increase overall data throughput to a remote device
• Device Link Detection Protocol (DLDP)
Monitors link connectivity and shuts down ports at both ends if unidirectional traffic is detected, preventing loops in STPbased networks
• Jumbo Frame Support
QuickSpecs
HPE FlexNetwork 5130 EI Switch Series
Standard Features
Page 8
Layer 3 services
Centralizes and reduces the cost of IPv4 address management
Warranty and support
http://www.hpe.com/networking/warrantysummary
• Address Resolution Protocol (ARP)
Determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows
detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are
separated by a Layer 2 network
• Dynamic Host Configuration Protocol (DHCP)
Simplifies the management of large IP networks; supports client; DHCP Relay enables DHCP operation across subnets
• Loopback interface address
Defines an address that can always be reachable, improving diagnostic capability
• User Datagram Protocol (UDP) helper function
Allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and
prevents server spoofing for UDP services such as DHCP
• Route maps
Provide more control during route redistribution; allow filtering and altering of route metrics
• DHCP server
Limited Lifetime Warranty
•
http://www.hpe.com/networking/warrantysummary
See
product purchase.
Software releases
•
To find software for your product, refer to http://www.hpe.com/networking/support
releases available with your product purchase, refer to
for warranty and support information included with your
; for details on the software
QuickSpecs
HPE FlexNetwork 5130 EI Switch Series
Configuration
Information
Page 9
Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
Switch Chassis
Rule #
Description
SKU
2, 4, 5
HPE FlexNetwork 5130 24G 4SFP+ EI Switch
JG932A
•
• 1U - Height
HPE FlexNetwork 5130 24G 4SFP+ EI Switch PDU Cable NA/JP/TW
JG932A#B2B
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
HPE FlexNetwork 5130 24G 4SFP+ EI Switch PDU Cable ROW
JG932A#B2C
• C15 PDU Jumper Cord (ROW)
HPE FlexNetwork 5130 24G 4SFP+ EI Switch 220V N.A. - english localized
JG932A#B2E
• NEMA L6-20P Cord (NA/MEX/JP/TW)
1, 2
HPE FlexNetwork 5130 24G SFP 4SFP+ EI Switch
JG933A
•
• 1U - Height
2, 4, 5
HPE FlexNetwork 5130 48G 4SFP+ EI Switch
JG934A
•
• 1U - Height
HPE FlexNetwork 5130 48G 4SFP+ EI Switch PDU Cable NA/JP/TW
JG934A#B2B
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
HPE FlexNetwork 5130 48G 4SFP+ EI Switch PDU Cable ROW
JG934A#B2C
• C15 PDU Jumper Cord (ROW)
HPE FlexNetwork 5130 48G 4SFP+ EI Switch 220V N.A. - english localized
JG934A#B2E
• NEMA L6-20P Cord (NA/MEX/JP/TW)
2, 4, 5
HPE FlexNetwork 5130 24G PoE+ 4SFP+ (370W) EI Switch
JG936A
•
• 1U - Height
HPE FlexNetwork 5130 24G PoE+ 4SFP+ (370W) EI Switch PDU Cable NA/JP/TW
JG936A#B2B
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
HPE FlexNetwork 5130 24G PoE+ 4SFP+ (370W) EI Switch PDU Cable ROW
JG936A#B2C
• C15 PDU Jumper Cord (ROW)
24 RJ-45 autosensing 10/100/1000 ports
• 4 SFP+ ports
• min=0 \ max=4 SFP+ Transceivers
• Power supply included
24 SFP ports
• (Of the 24, 8 are dual-personality ports - autosensing 10/100/1000BASE-T or SFP)
• min=0 \ max=24 SFP Transceivers
• 4 SFP+ ports
• min=0 \ max=4 SFP+ Transceivers
• Must select min 1 power supply
48 RJ-45 autosensing 10/100/1000 ports
• 4 SFP+ ports
• min=0 \ max=4 SFP+ Transceivers
• Power supply included
24 RJ-45 autosensing 10/100/1000 ports
• 4 SFP+ ports
• min=0 \ max=4 SFP+ Transceivers
• Power supply included
QuickSpecs
HPE FlexNetwork 5130 EI Switch Series
Configuration
Information
Page 10
HPE FlexNetwork 5130 24G PoE+ 4SFP+ (370W) EI Switch 220V N.A. - english localized
JG936A#B2E
• NEMA L6-20P Cord (NA/MEX/JP/TW)
2, 4, 5
HPE FlexNetwork 5130 48G PoE+ 4SFP+ (370W) EI Switch
JG937A
•
• 1U - Height
HPE FlexNetwork 5130 48G PoE+ 4SFP+ (370W) EI Switch PDU Cable NA/JP/TW
JG937A#B2B
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
HPE FlexNetwork 5130 48G PoE+ 4SFP+ (370W) EI Switch PDU Cable ROW
JG937A#B2C
• C15 PDU Jumper Cord (ROW)
HPE FlexNetwork 5130 48G PoE+ 4SFP+ (370W) EI Switch 220V N.A. - english localized
JG937A#B2E
• NEMA L6-20P Cord (NA/MEX/JP/TW)
2, 4, 5
HPE FlexNetwork 5130 24G POE+ 2SFP+ 2XGT (370W) EI Switch
JG940A
•
• 1U - Height
HPE FlexNetwork 5130 24G POE+ 2SFP+ 2XGT (370W) EI Switch PDU Cable NA/JP/TW
JG940A#B2B
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
HPE FlexNetwork 5130 24G POE+ 2SFP+ 2XGT (370W) EI Switch PDU Cable ROW
JG940A#B2C
• C15 PDU Jumper Cord (ROW)
HPE FlexNetwork 5130 24G POE+ 2SFP+ 2XGT (370W) EI Switch 220V N.A. - english localized
JG940A#B2E
• NEMA L6-20P Cord (NA/MEX/JP/TW)
2, 4, 5
HPE FlexNetwork 5130 48G POE+ 2SFP+ 2XGT (370W) EI Switch
JG941A
•
• 1U - Height
HPE FlexNetwork 5130 48G POE+ 2SFP+ 2XGT (370W) EI Switch PDU Cable NA/JP/TW
JG941A#B2B
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
HPE FlexNetwork 5130 48G POE+ 2SFP+ 2XGT (370W) EI Switch PDU Cable ROW
JG941A#B2C
• C15 PDU Jumper Cord (ROW)
HPE FlexNetwork 5130 48G POE+ 2SFP+ 2XGT (370W) EI Switch 220V N.A. - english localized
JG941A#B2E
• NEMA L6-20P Cord (NA/MEX/JP/TW)
48 RJ-45 autosensing 10/100/1000 ports
• 4 SFP+ ports
• min=0 \ max=4 SFP+ Transceivers
• Power supply included
24 RJ-45 autosensing 10/100/1000 ports
• 2 SFP+ ports
• min=0 \ max=2 SFP Transceivers
• 2 RJ-45 1/10GBASE-T ports
• Power supply included
48 RJ-45 autosensing 10/100/1000 ports
• 2 SFP+ ports
• min=0 \ max=2 SFP Transceivers
• 2 RJ-45 1/10GBASE-T ports
• Power supply included
QuickSpecs
HPE FlexNetwork 5130 EI Switch Series
Configuration
Information
Page 11
Configuration Rules
Rule #
Description
SKU
1
The following Transceivers install into this Switch: (SFP Ports)
HPE X115 100M SFP LC FX Transceiver
JD102B
HPE X110 100M SFP LC LX Transceiver
JD120B
HPE X115 100M SFP LC BX 10-U Transceiver
JD100A
HPE X115 100M SFP LC BX 10-D Transceiver
JD101A
HPE X120 1G SFP LC SX Transceiver
JD118B
HPE X120 1G SFP LC LX Transceiver
JD119B
HPE X120 1G SFP RJ45 T Transceiver
JD089B
HPE X120 1G SFP LC BX 10-U Transceiver
JD098B
HPE X120 1G SFP LC BX 10-D Transceiver
JD099B
HPE X120 1G SFP LC LH100 Transceiver
JD103A
2
The following Transceivers install into this Switch: (SFP+ Ports)
HPE X120 1G SFP LC SX Transceiver
JD118B
HPE X120 1G SFP LC LX Transceiver
JD119B
HPE X120 1G SFP RJ45 T Transceiver
JD089B
HPE X120 1G SFP LC BX 10-U Transceiver
JD098B
HPE X120 1G SFP LC BX 10-D Transceiver
JD099B
HPE X120 1G SFP LC LH100 Transceiver
JD103A
HPE X130 10G SFP+ LC SR Transceiver
JD092B
HPE X130 10G SFP+ LC LR Transceiver
JD094B
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HPE X2A0 10G SFP+ to SFP+ 7m Active Optical Cable
JL290A
HPE X2A0 10G SFP+ to SFP+ 10m Active Optical Cable
JL291A
HPE X2A0 10G SFP+ to SFP+ 20m Active Optical Cable
JL292A
4
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) or
#B2E. (See Localization Menu)
5
#B2E is Offered only in NA, Mexico, Taiwan and Japan.
Notes:
−
−
−
−
North America, Mexico, Taiwan, and Japan)
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan,
and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO
and Box Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in
Loading...