Page 1
QuickSpecs
Overview
Models
HP 2530-48G-PoE+ Switch
HP 2530-24G-PoE+ Switch
HP 2530-8G-PoE+ Switch
HP 2530-48-PoE+ Switch
HP 2530-24-PoE+ Switch
HP 2530-8-PoE+ Switch
HP 2530-48G Switch
HP 2530-24G Switch
HP 2530-8G Switch
HP 2530-48 Switch
HP 2530-24 Switch
HP 2530-8 Switch
Key features
Cost-effective, reliable, and secure fully managed Layer 2 switches
8, 24, or 48 Gigabit or Fast Ethernet ports with 4 Gigabit uplink ports(2 uplinks on 8-port models)
PoE+ models for voice, video, and wireless deployments
ACLs, EEE, and IPv4/IPv6 host support
Includes lifetime warranty, all software releases, and technical phone support
HP 2530 Switch Series
J9772A
J9773A
J9774A
J9778A
J9779A
J9780A
J9775A
J9776A
J9777A
J9781A
J9782A
J9783A
Introduction
The HP 2530 Switch Series consists of 12 fully managed Layer 2 edge switches that deliver cost-effective, reliable, secure, and easyto-use connectivity to business networks. Designed for entry-level to midsize enterprise networks, these Gigabit and Fast Ethernet
switches deliver full Layer 2 capabilities with optional PoE+, enhanced access security, traffic prioritization, and IPv6 host support.
The HP 2530 Switch Series offers uplink flexibility with four Gigabit Ethernet uplinks on all 24- and 48-port models. Gigabit Ethernet
uplinks are four small form-factor pluggable (SFP) slots for fiber connectivity on the 24- and 48-port Gigabit Ethernet models. The Fast
Ethernet 24- and 48-port models have two SFPs and two RJ-45 Gigabit uplinks. The compact and fanless 8-port switches offer
additional flexibility with two dual-personality ports that can be used as either RJ-45 Gigabit Ethernet or SFP ports. For customers
implementing Power over Ethernet for voice, video, or wireless deployments, the HP 2530 PoE+ switches are IEEE 802.3af and IEEE
802.3at compliant with up to 30 W per port.
The switch series is easy to use, deploy, and manage via SNMP, CLI, and Web GUI. It offers flexible wall, table, and rack mounting; quiet
operation with fanless and variable speed fan models; and improved power savings, with features such as IEEE 802.3 az (Energy
Efficient Ethernet). These switches include a lifetime warranty, as well as all software releases and technical phone support.
Features and Benefits
Quality of Service
Traffic prioritization (IEEE 802.1p)
allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted
(QoS)
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 1
Page 2
QuickSpecs
HP 2530 Switch Series
Overview
deficit round robin (WDRR) or strict priority (SP)
Simplified QoS configuration
Port-based
prioritize traffic by specifying a port and priority level
VLAN-based
prioritize traffic by specifying a VLAN and priority level
Class of Service (CoS)
sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source
port, and DiffServ
Rate limiting
sets per-port ingress enforced maximums for all ingressed traffic or for broadcast, multicast, or unknown destination traffic
Layer 4 prioritization
enables prioritization based on TCP/UDP port numbers
Flow control
helps deliver reliable communication during full-duplex operation
Management
Choice of management interfaces
Web graphical user interface (GUI)
HTML-based easy-to-use graphical interface allows configuration of the switch from any Web browser
Command-line interface (CLI)
provides advanced configuration and diagnostics through a robust CLI
Simple Network Management Protocol (SNMPv1/v2c/v3)
allows a switch to be managed with a variety of third-party network management applications
Virtual stacking
provides single IP address management for up to 16 switches
sFlow (RFC 3176)
delivers wire-speed traffic accounting and monitoring configured by SNMP and CLI with three terminal encrypted receivers
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
automates device discovery protocol for easy mapping by network management applications
Logging
provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce
the number of log events generated
Port mirroring
allows traffic to be mirrored on any port or a network analyzer to assist with diagnostics or detecting network attacks
RMON (remote monitoring)
provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Find-Fix-and-Inform
finds and fixes common network problems automatically, then informs the administrator
Friendly port names
allows assignment of descriptive names to ports
Dual flash images
provides independent primary and secondary operating system files for backup while upgrading
Multiple configuration files
allows multiple configuration files to be stored to a flash image
Front-panel LEDs
Locator LED
allows users to set the locator LED on a specific switch to either turn on, blink, or turn off; simplifies troubleshooting by
making it easy to locate a particular switch within a rack of similar switches
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 2
Page 3
QuickSpecs
HP 2530 Switch Series
Overview
Per-port LEDs
provides an at-a-glance view of status, activity, speed, and full-duplex operation
Power and fault LEDs
display any issues
Connectivity
IPv6
IPv6 host
allows the switch to be deployed and managed at the edge of an IPv6 network
Dual stack (IPv4/IPv6)
supports connectivity for both protocols; provides a transition mechanism from IPv4 to IPv6
MLD snooping
forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network
IEEE 802.3af Power over Ethernet (PoE)
provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and
security cameras
IEEE 802.3at Power over Ethernet Plus
provides up to 30 W per port to IEEE 802.3 for PoE/PoE+-powered devices such as video IP phones, IEEE 802.11n wireless access
points, and advanced pan/tilt/zoom security cameras (see product specifications for total PoE power available)
Auto-MDIX
adjusts automatically for straight-through or crossover cables on all ports
Pre-standard PoE support
detects and provides power to pre-standard PoE devices; see list of supported devices in the product FAQ at
www.hp.com/networking/support
Small form-factor pluggable (SFP) slots
provides fiber connectivity such as Gigabit-SX, -LX, -LH, and -BX with four SFP slots on all 24- and 48-port Gigabit Ethernet
models; Fast Ethernet 24- and 48-port models have two SFP slots and two RJ-45 Gigabit uplinks; 8-port models have two dualpersonality ports supporting either SFP or RJ-45 Gigabit uplinks
Dual-personality (RJ-45 or USB micro-B) serial console port
gives easy access to switch CLI with front of switch location and flexibility of using either RJ-45 or USB micro-B serial console
port
Layer 2 switching
VLANs
provides support for 512 VLANs and 4,094 VLAN IDs
Jumbo packet support
supports up to 9220-byte frame size to improve the performance of large data transfers; 8- and 24-port Fast Ethernet models
automatically support up to 2000-byte frames with no configuration needed
16K MAC address table
provides access to many Layer 2 devices
GARP VLAN Registration Protocol
allows automatic learning and dynamic assignment of VLANs
Security
Access control lists (ACLs)
accommodates IPv4/IPv6 port and VLAN-based ACLs (IPv6 ACL is supported only on Gigabit Ethernet and 48-port models)
Source-port filtering
allows only specified ports to communicate with each other
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 3
Page 4
QuickSpecs
HP 2530 Switch Series
Overview
RADIUS/TACACS+
eases switch management security administration by using a password authentication server
Secure Sockets Layer (SSL)
encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
Port security
allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC address lockout
prevents particular configured MAC addresses from connecting to the network
Multiple user authentication methods
IEEE 802.1X
uses an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server to authenticate in accordance with
industry standards
Web-based authentication
provides a browser-based environment, similar to IEEE 802.1X, to authenticate clients that do not support the IEEE
802.1X supplicant
MAC-based authentication
authenticates the client with the RADIUS server based on the client's MAC address
Secure shell (SSHv2; client and server)
encrypts all transmitted data for secure, remote CLI access over IP networks
Secure shell
encrypts all transmitted data for secure remote CLI access over IP networks
STP BPDU port protection
blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
STP root guard
protects the root bridge from malicious attacks or configuration mistakes
Secure management access
delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2 and SNMPv3
Custom banner
displays security policy when users log in to the switch
Secure FTP
allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch
configuration file
Protected ports CLI
offers intuitive CLI to configure the source-port filters feature by allowing specified ports to be isolated from all other ports on
the switch; the protected port or ports can communicate only with the uplink or shared resources
Authentication flexibility
Multiple IEEE 802.1X users per port
provides authentication for up to eight IEEE 802.1X users per port; prevents a user from "piggybacking" on another user's
IEEE 802.1X authentication
Concurrent IEEE 802.1X and Web or MAC authentication schemes per port
allows a switch port to accept any IEEE 802.1X and either Web or MAC authentications
Switch management logon security
helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication
Convergence
LLDP-MED (Media Endpoint Discovery)
defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure
network devices such as IP phones
IP multicast (data-driven IGMP)
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 4
Page 5
QuickSpecs
HP 2530 Switch Series
Overview
prevents flooding of IP multicast traffic
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
facilitates easy mapping using network management applications with LLDP automated device discovery protocol
PoE and PoE+ allocations
support multiple method (automatic, IEEE 802.3at dynamic, LLDP-MED fine grain, IEEE 802.3af device class, or user specified) to
allocate and manage PoE/PoE+ power for more efficient energy use
Voice VLAN
uses LLDP-MED to automatically configure a VLAN for IP phones
IP multicast (data-driven IGMPv3)
prevents flooding of IP multicast traffic
Resiliency and high availability
Port trunking and link aggregation
Trunking
supports up to eight links per trunk to increase bandwidth and create redundant connections; supports L2, L3, and L4
trunk load-balancing algorithm (L4 trunk load balancing is supported only on Gigabit Ethernet and 48-port models)
IEEE 802.3ad Link Aggregation Protocol (LACP)
eases configuration of trunks through automatic configuration
IEEE 802.1s Multiple Spanning Tree
provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for
IEEE 802.1d and IEEE 802.1w
Product Architecture
Energy-efficient design
IEEE 802.3az
reduces power consumption during periods of low data activity on Gigabit Ethernet switches
Port low power mode
allows the port to automatically go into low-power mode to conserve energy when no link is detected
Fans
decreases power consumption in fanless (all 8-port, 2530-24, and 2530-48 switches) and variable-speed fan switches
Port LEDs
conserves energy by optionally turning off port link and activity LEDs
Switch on a chip
provides highly integrated, high-performance switch design with a nonblocking architecture
Flexibility
Flexible mounting
Rackable
accommodates mounting in a standard 19-inch rack using included hardware
Wall mountable
allows the switch to be mounted to a wall using included hardware
Surface mountable
allows the switch to be mounted above or below a surface (such as a desk or table) with included hardware
Quiet operation
lowers noise for deployments in acoustically sensitive environments such as conference rooms and office space
Compact size
reduces space requirements (see product specifications for exact dimensions)
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 5
Page 6
QuickSpecs
HP 2530 Switch Series
Overview
Warranty and support
Lifetime warranty
for as long as you own the product with advance replacement and next-business-day delivery (available in most countries)†
Electronic and telephone support
limited electronic and telephone support is available from HP; to reach our support centers, refer to
www.hp.com/networking/contact-support
www.hp.com/networking/warrantysummary
Software releases
to find software for your product, refer to
your product purchase, refer to
†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day advance
replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and Services zl Modules, HP
Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed Steelhead, HP MSM765zl Mobility Controller
and HP Survivable Branch Communication zl Module powered by Microsoft Lync has a five-year hardware warranty. For details, refer to
the Software license and hardware warranty statements at
www.hp.com/networking/warrantysummary
; for details on the duration of support provided with your product purchase, refer to
www.hp.com/networking/support
www.hp.com/networking/warranty
; for details on the software releases available with
.
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 6
Page 7
QuickSpecs
HP 2530 Switch Series
Configuration
Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone
are not part of a CTO or Rack-Shippable solution.
HP 2530-8 Switch
8 RJ-45 autosensing 10/100 ports
2 dual-personality ports; RJ-45 10/100/1000 or SFP slot (Min 0 // Max 2 SFP)
Power Supply Included
1U - Height
HP 2530-8-PoE+ Switch
8 RJ-45 autosensing 10/100 PoE+ports
2 dual-personality ports; RJ-45 10/100/1000 or SFP slot (Min 0 // Max 2 SFP)
Power Supply Included
1U - Height
HP 2530-8G Switch
8 RJ-45 autosensing 10/100/1000 ports
2 dual-personality ports; RJ-45 10/100/1000 or SFP slot (Min 0 // Max 2 SFP)
Power Supply Included
1U - Height
HP 2530-8G-PoE+ Switch
8 RJ-45 autosensing 10/100/1000 PoE+ ports
2 dual-personality ports; RJ-45 10/100/1000 or SFP slot (Min 0 // Max 2 SFP)
Power Supply Included
1U - Height
HP 2530-24 Switch
24 RJ-45 autosensing 10/100 ports
2 fixed Gigabit Ethernet SFP ports (Min 0 // Max 2 SFP)
2 RJ-45 autosensing 10/100/1000 ports
Power Supply Included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
HP 2530-24-PoE+ Switch
See Configuration Note:1,
See Configuration Note:1,
See Configuration Note:1,
See Configuration Note:1,
See Configuration Note:1,
J9783A
3
J9780A
3
J9777A
3
J9774A
3
J9782A
2
J9782A#B2B
J9782A#B2C
J9779A
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 7
Page 8
QuickSpecs
Configuration
HP 2530 Switch Series
24 RJ-45 autosensing 10/100 PoE+ ports
2 fixed Gigabit Ethernet SFP ports (Min 0 // Max 2 SFP)
2 RJ-45 autosensing 10/100/1000 ports
Power Supply Included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
HP 2530-24G Switch
24 RJ-45 autosensing 10/100/1000 ports
4 fixed Gigabit Ethernet SFP ports (Min 0 // Max 4 SFP)
Power Supply Included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
HP 2530-24G-PoE+ Switch
24 RJ-45 autosensing 10/100/1000 PoE+ ports
4 fixed Gigabit Ethernet SFP ports (Min 0 // Max 4 SFP)
Power Supply Included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
HP 2530-48 Switch
48 RJ-45 autosensing 10/100 ports
2 fixed Gigabit Ethernet SFP ports (Min 0 // Max 2 SFP)
2 RJ-45 autosensing 10/100/1000 ports
Power Supply Included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
See Configuration Note:1,
2
J9779A#B2B
J9779A#B2C
J9776A
See Configuration Note:1,
2
J9776A#B2B
J9776A#B2C
J9773A
See Configuration Note:1,
2
J9773A#B2B
J9773A#B2C
J9781A
See Configuration Note:1,
2
J9781A#B2B
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 8
Page 9
QuickSpecs
HP 2530 Switch Series
Configuration
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
HP 2530-48-PoE+ Switch
48 RJ-45 autosensing 10/100 PoE+ ports
2 fixed Gigabit Ethernet SFP ports (Min 0 // Max 2 SFP)
2 RJ-45 autosensing 10/100/1000 ports
Power Supply Included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
HP 2530-48G Switch
48 RJ-45 autosensing 10/100/1000 ports
4 fixed Gigabit Ethernet SFP ports (Min 0 // Max 4 SFP)
Power Supply Included
1U - Height
J9781A#B2C
J9778A
See Configuration Note:1,
2
J9778A#B2B
J9778A#B2C
J9775A
See Configuration Note:1,
2
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
HP 2530-48G-PoE+ Switch
48 RJ-45 autosensing 10/100/1000 PoE+ ports
4 fixed Gigabit Ethernet SFP ports (Min 0 // Max 4 SFP)
Power Supply Included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
J9775A#B2B
J9775A#B2C
J9772A
See Configuration Note:1,
2
J9772A#B2B
J9772A#B2C
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 9
Page 10
QuickSpecs
HP 2530 Switch Series
Configuration
Configuration Rules:
Note 1
Note 2
Note 3
Remarks:
The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X111 100M SFP LC FX Transceiver
HP X112 100M SFP LC BX-D Transceiver
HP X112 100M SFP LC BX-U Transceiver
HP X121 1G SFP LC LH Transceiver
HP X122 1G SFP LC BX-D Transceiver
HP X122 1G SFP LC BX-U Transceiver
HP X121 1G SFP RJ45 T Transceiver
Localization Or PDU cable required. (See Remarks Below)
Localization cable required. No B2x options
Drop down under power supply should offer the following options and results:
Switch to Wall Power Cord - Should leave existing Localized Option (See Localization Menu for list.)
Switch to PDU Power Cord - Should replace localized option with #B2B or #B2C in AMS, AP, J, C. #B2C
added to localized option in EMEA.
J4858C
J4859C
J9054C
J9099B
J9100B
J4860C
J9142B
J9143B
J8177C
Rack Level Integration CTO Models
HP 2530-24 Switch
24 RJ-45 autosensing 10/100 ports
2 fixed Gigabit Ethernet SFP ports (Min 0 // Max 2 SFP)
2 RJ-45 autosensing 10/100/1000 ports
Power Supply Included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
HP 2530-24-PoE+ Switch
DA - 14447 Worldwide — Version 2 — June 10, 2013
J9782A
See Configuration
Note:1, 2, 3, 4
J9782A#B2B
J9782A#B2C
J9779A
Page 10
Page 11
QuickSpecs
Configuration
HP 2530 Switch Series
24 RJ-45 autosensing 10/100 PoE+ ports
2 fixed Gigabit Ethernet SFP ports (Min 0 // Max 2 SFP)
2 RJ-45 autosensing 10/100/1000 ports
Power Supply Included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
HP 2530-24G Switch
24 RJ-45 autosensing 10/100/1000 ports
4 fixed Gigabit Ethernet SFP ports (Min 0 // Max 4 SFP)
Power Supply Included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
See Configuration
Note:1, 2, 3, 4
J9779A#B2B
J9779A#B2C
J9776A
See Configuration
Note:1, 2, 3, 4
J9776A#B2B
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
HP 2530-24G-PoE+ Switch
24 RJ-45 autosensing 10/100/1000 PoE+ ports
4 fixed Gigabit Ethernet SFP ports (Min 0 // Max 4 SFP)
Power Supply Included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
HP 2530-48 Switch
48 RJ-45 autosensing 10/100 ports
2 fixed Gigabit Ethernet SFP ports (Min 0 // Max 2 SFP)
2 RJ-45 autosensing 10/100/1000 ports
Power Supply Included
1U - Height
J9776A#B2C
J9773A
See Configuration
Note:1, 2, 3, 4
J9773A#B2B
J9773A#B2C
J9781A
See Configuration
Note:1, 2, 3, 4
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 11
Page 12
QuickSpecs
HP 2530 Switch Series
Configuration
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
HP 2530-48-PoE+ Switch
48 RJ-45 autosensing 10/100 PoE+ ports
2 fixed Gigabit Ethernet SFP ports (Min 0 // Max 2 SFP)
2 RJ-45 autosensing 10/100/1000 ports
Power Supply Included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
J9781A#B2B
J9781A#B2C
J9778A
See Configuration
Note:1, 2, 3, 4
J9778A#B2B
J9778A#B2C
HP 2530-48G Switch
48 RJ-45 autosensing 10/100/1000 ports
4 fixed Gigabit Ethernet SFP ports (Min 0 // Max 4 SFP)
Power Supply Included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
HP 2530-48G-PoE+ Switch
48 RJ-45 autosensing 10/100/1000 PoE+ ports
4 fixed Gigabit Ethernet SFP ports (Min 0 // Max 4 SFP)
Power Supply Included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
J9775A
See Configuration
Note:1, 2, 3, 4
J9775A#B2B
J9775A#B2C
J9772A
See Configuration
Note:1, 2, 3, 4
J9772A#B2B
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 12
Page 13
QuickSpecs
Configuration
HP 2530 Switch Series
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
Configuration Rules:
Note 1
Note 2
Note 3
J9772A#B2C
The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X111 100M SFP LC FX Transceiver
HP X112 100M SFP LC BX-D Transceiver
HP X112 100M SFP LC BX-U Transceiver
HP X121 1G SFP LC LH Transceiver
HP X122 1G SFP LC BX-D Transceiver
HP X122 1G SFP LC BX-U Transceiver
HP X121 1G SFP RJ45 T Transceiver
If this switch is factory installed in any HP Universal Racks, Then the J9583A#0D1 is required.
Localization required on orders without #B2B or #B2C options.
J4858C
J4859C
J9054C
J9099B
J9100B
J4860C
J9142B
J9143B
J8177C
Note 3
Note 4
Remarks:
#B2B is required in AMS, and #B2C in APJ and EMEA. (Only when Factory Racked)
If HP CTO Switch Chassis is selected to be Rack Level Integration, Then the CTO Switch Chassis needs to
integrate (with #0D1) to the HP Networking Universal Rack.
Drop down under power supply should offer the following options and results:
Switch to PDU Power Cord - replace localized option with #B2B in AMS or #B2C in APJ and EMEA.
Switch to Wall Power Cord - Should leave existing Localized Option (no #B2x options)
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 13
Page 14
QuickSpecs
Configuration
HP 2530 Switch Series
Internal Power Supplies
Internal Power supplies included
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Transceivers
SFP Transceivers
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X111 100M SFP LC FX Transceiver
HP X121 1G SFP LC LH Transceiver
HP X122 1G SFP LC BX-D Transceiver
HP X122 1G SFP LC BX-U Transceiver
HP X112 100M SFP LC BX-D Transceiver
HP X112 100M SFP LC BX-U Transceiver
HP X121 1G SFP RJ45 T Transceiver
J4858C
J4859C
J9054C
J4860C
J9142B
J9143B
J9099B
J9100B
J8177C
Cables
Multi-Mode Cables
HP .5m Multi-mode OM3 LC/LC FC Cable
HP 1m Multi-mode OM3 LC/LC FC Cable
HP 2 m Multimode OM3 LC/LC FC Cable
HP 5 m Multimode OM3 LC/LC FC Cable
HP 15 m Multimode OM3 LC/LC FC Cable
HP 30 m Multimode OM3 LC/LC FC Cable
HP 50 m Multimode OM3 LC/LC FC Cable
Switch Enclosure Options
Cable Guard
HP X510 1U Cable Guard
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
J9700A
See Configuration Note:1
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 14
Page 15
QuickSpecs
Configuration
Configuration Rules:
Note 1
Option Mounting Kit
This Cable Guard is supported only on the J9783A, J9780A, J9777A and J9774A.
HP 2530 Switch Series
HP 2530 8-port Switch Pwr Adptr Shelf
Configuration Rules:
Note 1
This Power Adapter Shelf is supported only on the J9783A, J9780A, J9777A and J9774A.
Rack Mount Kit
HP X410 1U Univ 4-post Rack Mnt Kit
Configuration Rules:
Note 1
Note 2
If this Mounting Kit is order with #0D1 then it integrates to the HP Universal Rack. (not the switch)
If the J9583A is ordered in EMEA fire the following UNBUILDABLE error:
"The J9583A cannot be ordered with option integrated to the Rack in the EMEA region. The Rack Mount
kit must be ordered as BTO using supplier 8OCZ."
J9820A
See Configuration Note:1
J9583A
See Configuration Note:1, 2
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 15
Page 16
QuickSpecs
Technical Specifications
HP 2530 Switch Series
HP 2530-48G-PoE+ Switch
(J9772A)
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics
48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T,
IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at
PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 fixed Gigabit Ethernet SFP ports
1 Dual-personality (RJ-45 or USB micro-B) serial console port
Dimensions
Weight
Processor
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rackmounting kit available); horizontal surface mounting; wall mounting
IPv6 Ready Certified
100 Mb Latency
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Non-operating/Storage
relative humidity
Altitude
Acoustic
Frequency
Maximum heat
dissipation
Voltage
Current
Maximum power rating
Idle power
PoE power
Notes
17.44(w) x 13.00(d) x 1.75(h) in (44.3 x 32.26 x
4.45 cm) (1U height)
10.4 lb (4.72 kg)
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3
DIMM; packet buffer size: 3 MB dynamically
allocated
< 7.4 µs (LIFO 64-byte packets)
< 2.3 µs (LIFO 64-byte packets)
up to 77.3 million pps (64-byte packets)
104 Gbps
16000 entries
32°F to 113°F (0°C to 45°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft (3 km)
Power: 33.6 dB, Pressure: 43.9 dB
50/60 Hz
236 BTU/hr (248.98 kJ/hr), (switch only: 236
BTU/hr; combined switch + max. PoE devices:
1624 BTU/hr)
100-127/200-240 VAC
5.8/2.9 A
476 W
40.1 W
382 W
Idle power is the actual power consumption of the
device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 16
Page 17
QuickSpecs
Technical Specifications
Safety
Emissions
Immunity
Management
Notes
Services
HP 2530 Switch Series
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged
in, and all modules populated.
PoE power is the total power budget available to
all PoE ports.
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Generic
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency
magnetic field
Voltage dips and
interruptions
Harmonics
Flicker
IMC - Intelligent Management Center; command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C or Micro USB);
IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB
IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af
apply to PoE+ models only. When using SFPs with this product, SFPs with
revision "B" or later (product number ends with the letter "B" or later, e.g.,
J4858B, J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SWupdates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
EN 55024, CISPR 24
EN 55024, CISPR 24
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 17
Page 18
QuickSpecs
Technical Specifications
HP 2530 Switch Series
1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
support and software updates (HR851E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
HP 2530-24G-PoE+ Switch
(J9773A)
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T,
IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at
PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 fixed Gigabit Ethernet SFP ports
1 dual-personality (RJ-45 or USB micro-B) serial console port
Dimensions
Weight
Processor
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rackmounting kit available); horizontal surface mounting; wall mounting
IPv6 Ready Certified
100 Mb Latency
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
www.hp.com/networking/services
17.44(w) x 13.00(d) x 1.75(h) in (44.3 x 33.02 x
4.45 cm) (1U height)
8.7 lb (3.95 kg)
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3
DIMM; packet buffer size: 1.5 MB dynamically
allocated
< 7.4 µs (LIFO 64-byte packets)
< 2.3 µs (LIFO 64-byte packets)
up to 41.6 million pps (64-byte packets)
56 Gbps
16000 entries
for details on
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 18
Page 19
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Environment
Electrical characteristics
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Non-operating/Storage
relative humidity
Altitude
Acoustic
Frequency
Maximum heat
dissipation
Voltage
Current
Maximum power rating
Idle power
PoE power
Notes
32°F to 113°F (0°C to 45°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft (3 km)
Power: 39.6 dB, Pressure: 43.9 dB
50/60 Hz
135 BTU/hr (142.42 kJ/hr), (switch only: 135
BTU/hr; combined switch + max. PoE devices: 843
BTU/hr)
100-127/200-240 VAC
3.2/1.6 A
247 W
25.2 W
195 W
Idle power is the actual power consumption of the
device with no ports connected.
Safety
Emissions
Immunity
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged
in, and all modules populated.
PoE power is the total power budget available to
all PoE ports.
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Generic
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency
magnetic field
Voltage dips and
interruptions
EN 55024, CISPR 24
EN 55024, CISPR 24
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 19
Page 20
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Management
Notes
Services
Harmonics
Flicker
IMC - Intelligent Management Center; command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C or Micro USB);
IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB
IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af
apply to PoE+ models only. When using SFPs with this product, SFPs with
revision "B" or later (product number ends with the letter "B" or later, e.g.,
J4858B, J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SWupdates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
support and software updates (HR851E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
Refer to the HP website at
DA - 14447 Worldwide — Version 2 — June 10, 2013
www.hp.com/networking/services
for details on
Page 20
Page 21
QuickSpecs
Technical Specifications
HP 2530 Switch Series
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 2530-8G-PoE+ Switch
(J9774A)
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics
8 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T,
IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at
PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
2 dual-personality ports; each port can be used as either an RJ-45
10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx;
IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP
transceivers)
1 dual-personality (RJ-45 or USB micro-B) serial console port
Dimensions
Weight
Processor
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rackmounting kit available); horizontal surface mounting; wall mounting
IPv6 Ready Certified
100 Mb Latency
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Non-operating/
Storage relative humidity
Altitude
Acoustic
Frequency
Maximum heat
dissipation
Voltage
Current
Maximum power rating
Idle power
10(w) x 6.28(d) x 1.75(h) in (25.4 x 15.95 x 4.45
cm) (1U height)
2.2 lb (1 kg)
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3
DIMM; packet buffer size: 1.5 MB dynamically
allocated
< 7.4µs (LIFO 64-byte packets)
< 2.6 µs (LIFO 64-byte packets)
up to 14.8 million pps (64-byte packets)
20 Gbps
16000 entries
32°F to 113°F (0°C to 45°C)
15% to 95% @ 104°F (40°C), non-condensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft (3 km)
Power: 0 dB, Pressure: 0 dB
50/60 Hz
65 BTU/hr (68.58 kJ/hr), (switch only: 65 BTU/hr;
combined switch + max. PoE devices: 293 BTU/hr)
100-127/200-240 VAC
1.4 A
86 W
13.4 W
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 21
Page 22
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Safety
Emissions
Immunity
Management
Notes
Services
PoE power
Notes
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Generic
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency
magnetic field
Voltage dips and
interruptions
Harmonics
Flicker
IMC - Intelligent Management Center; command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C or Micro USB);
IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB
IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af
apply to PoE+ models only. When using SFPs with this product, SFPs with
revision "B" or later (product number ends with the letter "B" or later, e.g.,
J4858B, J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SWupdates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
67 W
Idle power is the actual power consumption of the
device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged
in, and all modules populated.
PoE power is the total power budget available to
all PoE ports.
EN 55024, CISPR 24
EN 55024, CISPR 24
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 22
Page 23
QuickSpecs
Technical Specifications
HP 2530 Switch Series
(UR954E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
support and software updates (HR851E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
HP 2530-48-PoE+ Switch
(J9778A)
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
48 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX;
Duplex: half or full
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
2 fixed Gigabit Ethernet SFP ports
1 dual-personality (RJ-45 or USB micro-B) serial console port
Dimensions
Weight
Processor
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rackmounting kit available); horizontal surface mounting; wall mounting
IPv6 Ready Certified
www.hp.com/networking/services
17.4(w) x 12.7(d) x 1.75(h) in (44.2 x 32.26 x 4.45
cm) (1U height)
10.1 lb (4.58 kg)
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3
DIMM; packet buffer size: 3 MB dynamically
allocat
for details on
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 23
Page 24
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Environment
Electrical characteristics
100 Mb Latency
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Non-operating/Storage
relative humidity
Altitude
Acoustic
Frequency
Maximum heat
dissipation
Voltage
Current
Maximum power rating
Idle power
PoE power
Notes
< 6.6 µs (LIFO 64-byte packets)
< 2.2 µs (LIFO 64-byte packets)
up to 13 million pps (64-byte packets)
17.6 Gbps
16000 entries
32°F to 113°F (0°C to 45°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft (3 km)
Power: 31.8 dB, Pressure: 37.9 dB
50/60 Hz
170 BTU/hr (179.35 kJ/hr), (switch only: 170
BTU/hr; combined switch + max. PoE devices:
1505 BTU/hr)
100-127/200-240 VAC
5.2/2.6 A
441 W
37.5 W
382 W
Idle power is the actual power consumption of the
device with no ports connected.
Safety
Emissions
Immunity
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged
in, and all modules populated.
PoE power is the total power budget available to
all PoE ports.
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Generic
EN
ESD
Radiated
EFT/Burst
Surge
DA - 14447 Worldwide — Version 2 — June 10, 2013
EN 55024, CISPR 24
EN 55024, CISPR 24
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
Page 24
Page 25
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Management
Notes
Services
Conducted
Power frequency
magnetic field
Voltage dips and
interruptions
Harmonics
Flicker
IMC - Intelligent Management Center; command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C or Micro USB);
IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB
IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af
apply to PoE+ models only. When using SFPs with this product, SFPs with
revision "B" or later (product number ends with the letter "B" or later, e.g.,
J4858B, J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SWupdates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
support and software updates (HR851E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 25
Page 26
QuickSpecs
Technical Specifications
HP 2530 Switch Series
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
HP 2530-24-PoE+ Switch
(J9779A)
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
24 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX;
Duplex: half or full
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
2 fixed Gigabit Ethernet SFP ports
1 dual-personality (RJ-45 or USB micro-B) serial console port
Dimensions
Weight
Processor
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rackmounting kit available); horizontal surface mounting; wall mounting
IPv6 Ready Certified
100 Mb Latency
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Non-operating/Storage
relative humidity
Altitude
Acoustic
Frequency
Maximum heat
dissipation
www.hp.com/networking/services
17.4(w) x 12.7(d) x 1.75(h) in (44.2 x 32.26 x 4.45
cm) (1U height)
8.4 lb (3.81 kg)
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3
DIMM; packet buffer size: 1.5 MB dynamically
allocated
< 1.7 µs (LIFO 64-byte packets)
< 1.1µs (LIFO 64-byte packets)
up to 9.5 million pps (64-byte packets)
12.8 Gbps
16000 entries
32°F to 113°F (0°C to 45°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft (3 km)
Power: 31.7 dB, Pressure: 40.4 dB
50/60 Hz
99 BTU/hr (104.45 kJ/hr), (switch only: 99 BTU/hr;
combined switch + max. PoE devices: 809 BTU/hr)
for details on
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 26
Page 27
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Safety
Emissions
Immunity
Management
Notes
Services
Voltage
Current
Maximum power rating
Idle power
PoE power
Notes
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Generic
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency
magnetic field
Voltage dips and
interruptions
Harmonics
Flicker
IMC - Intelligent Management Center; command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C or Micro USB);
IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB
IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af
apply to PoE+ models only. When using SFPs with this product, SFPs with
revision "B" or later (product number ends with the letter "B" or later, e.g.,
J4858B, J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SWupdates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
100-127/200-240 VAC
2.8/1.4 A
237 W
21.8 W
195 W
Idle power is the actual power consumption of the
device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged
in, and all modules populated.
PoE power is the total power budget available to
all PoE ports.
EN 55024, CISPR 24
EN 55024, CISPR 24
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 27
Page 28
QuickSpecs
Technical Specifications
HP 2530 Switch Series
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
support and software updates (HR851E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
HP 2530-8-PoE+ Switch
(J9780A)
Ports
Physical characteristics
DA - 14447 Worldwide — Version 2 — June 10, 2013
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
8 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX;
Duplex: half or full
2 dual-personality ports; each port can be used as either an RJ-45
10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx;
IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP
transceivers) ports
1 dual-personality (RJ-45 or USB micro-B) serial console port
Dimensions
Weight
www.hp.com/networking/services
10(w) x 6.28(d) x 1.75(h) in (25.4 x 15.95 x 4.45
cm) (1U height)
2.0 lb (0.91 kg)
for details on
Page 28
Page 29
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Memory and processor
Mounting
Performance
Environment
Electrical characteristics
Processor
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rackmounting kit available); horizontal surface mounting; wall mounting
IPv6 Ready Certified
100 Mb Latency
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Non-operating/Storage
relative humidity
Altitude
Acoustic
Frequency
Maximum heat
dissipation
Voltage
Current
Maximum power rating
Idle power
PoE power
Notes
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3
DIMM; packet buffer size: 1.5 MB dynamically
allocated
< 1.3 µs (LIFO 64-byte packets)
< 2.3µs (LIFO 64-byte packets)
up to 4.1 million pps (64-byte packets)
5.6 Gbps
16000 entries
32°F to 113°F (0°C to 45°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft (3 km)
Power: 0 dB, Pressure: 0 dB
50/60 Hz
29 BTU/hr (30.6 kJ/hr), (switch only: 29 BTU/hr;
combined switch + max. PoE devices: 262 TU/hr)
100-127/200-240 VAC
1.4 A
76.7 W
5.8 W
67 W
Idle power is the actual power consumption of the
device with no ports connected.
Safety
Emissions
Immunity
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged
in, and all modules populated.
PoE power is the total power budget available to
all PoE ports.
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Generic
DA - 14447 Worldwide — Version 2 — June 10, 2013
EN 55024, CISPR 24
Page 29
Page 30
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Management
Notes
Services
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency
magnetic field
Voltage dips and
interruptions
Harmonics
Flicker
IMC - Intelligent Management Center; command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C or Micro USB);
IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB
IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af
apply to PoE+ models only. When using SFPs with this product, SFPs with
revision "B" or later (product number ends with the letter "B" or later, e.g.,
J4858B, J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SWupdates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
support and software updates (HR851E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day
EN 55024, CISPR 24
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 30
Page 31
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
HP 2530-48G Switch
(J9775A)
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
4 fixed Gigabit Ethernet SFP ports
1 dual-personality (RJ-45 or USB micro-B) serial console port
Dimensions
Weight
Processor
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rackmounting kit available); horizontal surface mounting; wall mounting
IPv6 Ready Certified
100 Mb Latency
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Non-operating/Storage
relative humidity
Altitude
Acoustic
www.hp.com/networking/services
17.44(w) x 10.00(d) x 1.75(h) in (44.3 x 25.4 x 4.45
cm) (1U height)
6.8 lb (3.08 kg)
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3
DIMM; packet buffer size: 3 MB dynamically
allocated
< 7.4 µs (LIFO 64-byte packets)
< 2.3 µs (LIFO 64-byte packets)
up to 77.3 million pps (64-byte packets)
104 Gbps
16000 entries
32°F to 113°F (0°C to 45°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft (3 km)
Power: 31.0 dB, Pressure: 34.5 dB
for details on
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 31
Page 32
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Electrical characteristics
Safety
Emissions
Immunity
Management
Notes
Services
Frequency
Maximum heat
dissipation
Voltage
Current
Maximum power rating
Idle power
Notes
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Generic
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency
magnetic field
Voltage dips and
interruptions
Harmonics
Flicker
IMC - Intelligent Management Center; command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C or Micro USB);
IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB
IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af
apply to PoE+ models only. When using SFPs with this product, SFPs with
revision "B" or later (product number ends with the letter "B" or later, e.g.,
J4858B, J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SWupdates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
50/60 Hz
Achieved Miercom Certified Green Award
203 BTU/hr (214.17 kJ/hr)
100-127/200-240 VAC
1.2/0.7 A
59.5 W
29.5 W
Idle power is the actual power consumption of the
device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
EN 55024, CISPR 24
EN 55024, CISPR 24
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 32
Page 33
QuickSpecs
Technical Specifications
HP 2530 Switch Series
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
support and software updates (HR851E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
HP 2530-24G Switch
(J9776A)
Ports
Physical characteristics
DA - 14447 Worldwide — Version 2 — June 10, 2013
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
4 fixed Gigabit Ethernet SFP ports
1 dual-personality (RJ-45 or USB micro-B) serial console port
Supports a maximum of 28 Gigabit Ethernet ports
Dimensions
Weight
www.hp.com/networking/services
17.44(w) x 10.00(d) x 1.75(h) in (44.3 x 25.4 x 4.45
cm) (1U height)
6.1 lb (2.77 kg)
for details on
Page 33
Page 34
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Memory and processor
Mounting
Performance
Environment
Electrical characteristics
Safety
Emissions
Immunity
Processor
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rackmounting kit available); horizontal surface mounting; wall mounting
IPv6 Ready Certified
100 Mb Latency
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Non-operating/Storage
relative humidity
Altitude
Acoustic
Frequency
Maximum heat
dissipation
Voltage
Current
Maximum power rating
Idle power
Notes
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Generic
EN
ESD
Radiated
EFT/Burst
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3
DIMM; packet buffer size: 1.5 MB dynamically
allocated
< 7.4 µs (LIFO 64-byte packets)
< 2.3 µs (LIFO 64-byte packets)
up to 41.6 million pps (64-byte packets)
56 Gbps
16000 entries
32°F to 113°F (0°C to 45°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft (3 km)
Power: 26.4 dB, Pressure: 34.0 dB
50/60 Hz
164 BTU/hr (173.02 kJ/hr)
100-127/200-240 VAC
.6/.4 A
48.0 W
28.8 W
Idle power is the actual power consumption of the
device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged
in, and all modules populated.
EN 55024, CISPR 24
EN 55024, CISPR 24
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 34
Page 35
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Management
Notes
Services
Surge
Conducted
Power frequency
magnetic field
Voltage dips and
interruptions
Harmonics
Flicker
IMC - Intelligent Management Center; command-line interface; Web browser;
configuration menu; Out-of-band management (serial RS-232C or MicroUSB);
IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB
IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af
apply to PoE+ models only. When using SFPs with this product, SFPs with
revision "B" or later (product number ends with the letter "B" or later, e.g.,
J4858B, J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SWupdates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
support and software updates (HR851E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS558E)
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 35
Page 36
QuickSpecs
Technical Specifications
HP 2530 Switch Series
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
HP 2530-8G Switch
(J9777A)
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type:
Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
2 dual-personality ports; each port can be used as either an RJ-45
10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx;
IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP
transceivers) ports
1 dual-personality (RJ-45 or USB micro-B) serial console port
Dimensions
Weight
Processor
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rackmounting kit available); horizontal surface mounting; wall mounting
IPv6 Ready Certified
100 Mb Latency
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Non-operating/Storage
relative humidity
Altitude
Acoustic
Frequency
www.hp.com/networking/services
10(w) x 6.28(d) x 1.75(h) in (25.4 x 15.95 x 4.45
cm) (1U height)
2.0 lb (0.91 kg)
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3
DIMM; packet buffer size: 1.5 MB dynamically
allocated
< 7.4 µs (LIFO 64-byte packets)
< 2.6 µs (LIFO 64-byte packets)
up to 14.8 million pps (64-byte packets)
20 Gbps
16000 entries
32°F to 113°F (0°C to 45°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft (3 km)
Power: 0 dB, Pressure: 0 dB
50/60 Hz
for details on
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 36
Page 37
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Safety
Emissions
Immunity
Management
Notes
Services
Maximum heat
dissipation
Voltage
Current
Maximum power rating
Idle power
Notes
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Generic
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency
magnetic field
Voltage dips and
interruptions
Harmonics
Flicker
IMC - Intelligent Management Center; command-line interface; Web browser;
configuration menu; Out-of-band management (serial RS-232C or MicroUSB);
IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB
IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af
apply to PoE+ models only. When using SFPs with this product, SFPs with
revision "B" or later (product number ends with the letter "B" or later, e.g.,
J4858B, J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SWupdates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
63 BTU/hr (66.46 kJ/hr), (switch only: 63 BTU/hr)
100-127/200-240 VAC
0.5 A
18.6 W
13.6 W
Idle power is the actual power consumption of the
device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged
in, and all modules populated.
EN 55024, CISPR 24
EN 55024, CISPR 24
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 37
Page 38
QuickSpecs
Technical Specifications
HP 2530 Switch Series
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
support and software updates (HR851E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
HP 2530-48 Switch
(J9781A)
Ports
Physical characteristics
Memory and processor
DA - 14447 Worldwide — Version 2 — June 10, 2013
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
48 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX); Duplex: half or full
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
2 fixed Gigabit Ethernet SFP ports
1 dual-personality (RJ-45 or USB micro-B) serial console port
Dimensions
Weight
Processor
www.hp.com/networking/services
17.4(w) x 9.7(d) x 1.75(h) in (44.2 x 24.64 x 4.45
cm) (1U height)
6.3 lb (2.86 kg)
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3
DIMM; packet buffer size: 3 MB dynamically
allocated
for details on
Page 38
Page 39
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Mounting
Performance
Environment
Electrical characteristics
Safety
Emissions
Immunity
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rackmounting kit available); horizontal surface mounting; wall mounting
IPv6 Ready Certified
100 Mb Latency
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Non-operating/Storage
relative humidity
Altitude
Acoustic
Frequency
Maximum heat
dissipation
Voltage
Current
Maximum power rating
Idle power
Notes
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Generic
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
< 6.6 µs (LIFO 64-byte packets)
< 2.2 µs (LIFO 64-byte packets)
up to 13 million pps (64-byte packets)
17.6 Gbps
16000 entries
32°F to 113°F (0°C to 45°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft (3 km)
Power: 0 dB, Pressure: 0 dB
50/60 Hz
102 BTU/hr (107.61 kJ/hr)
100-127/200-240 VAC
0.7/0.4 A
29.9 W
17.1 W
Idle power is the actual power consumption of the
device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
EN 55024, CISPR 24
EN 55024, CISPR 24
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 39
Page 40
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Management
Notes
Services
Power frequency
magnetic field
Voltage dips and
interruptions
Harmonics
Flicker
IMC - Intelligent Management Center; command-line interface; Web browser;
configuration menu; Out-of-band management (serial RS-232C or MicroUSB);
IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB
IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af
apply to PoE+ models only. When using SFPs with this product, SFPs with
revision "B" or later (product number ends with the letter "B" or later, e.g.,
J4858B, J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SWupdates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
support and software updates (HR851E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business Day
IEC 61000-4-8
IEC 61000-4-11
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 40
Page 41
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
HP 2530-24 Switch
(J9782A)
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
24 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX); Duplex: half or full
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
2 fixed Gigabit Ethernet SFP ports
1 dual-personality (RJ-45 or USB micro-B) serial console port
Dimensions
Weight
Processor
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rackmounting kit available); horizontal surface mounting; wall mounting
IPv6 Ready Certified
100 Mb Latency
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Non-operating/Storage
relative humidity
Altitude
Acoustic
Frequency
Maximum heat
dissipation
Voltage
Current
www.hp.com/networking/services
17.4(w) x 9.7(d) x 1.75(h) in (44.2 x 24.64 x 4.45
cm) (1U height)
5.7 lb (2.59 kg)
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3
DIMM; packet buffer size: 1.5 MB dynamically
allocated
< 1.7 µs (LIFO 64-byte packets)
< 1.1 µs (LIFO 64-byte packets)
up to 9.5 million pps (64-byte packets)
12.8 Gbps
16000 entries
32°F to 113°F (0°C to 45°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft (3 km)
Power: 0 dB, Pressure: 0 dB
50/60 Hz
50 BTU/hr (52.75 kJ/hr)
100-127/200-240 VAC
0.3/0.2 A
for details on
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 41
Page 42
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Safety
Emissions
Immunity
Management
Notes
Services
Maximum power rating
Idle power
Notes
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Generic
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency
magnetic field
Voltage dips and
interruptions
Harmonics
Flicker
IMC - Intelligent Management Center; command-line interface; Web browser;
configuration menu; Out-of-band management (serial RS-232C or MicroUSB);
IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB
IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af
apply to PoE+ models only. When using SFPs with this product, SFPs with
revision "B" or later (product number ends with the letter "B" or later, e.g.,
J4858B, J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SWupdates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
14.7 W
8.4 W
Idle power is the actual power consumption of the
device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
EN 55024, CISPR 24
EN 55024, CISPR 24
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 42
Page 43
QuickSpecs
Technical Specifications
HP 2530 Switch Series
(UR954E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
support and software updates (HR851E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
HP 2530-8 Switch
(J9783A)
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
8 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
2 dual-personality ports; each port can be used as either an RJ-45
10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx;
IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP
transceivers) ports
1 dual-personality (RJ-45 or USB micro-B) serial console port
Dimensions
Weight
Processor
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rackmounting kit available); horizontal surface mounting; wall mounting
IPv6 Ready Certified
100 Mb Latency
www.hp.com/networking/services
10(w) x 6.28(d) x 1.75(h) in (25.4 x 15.95 x 4.45
cm) (1U height)
1.8 lb (0.82 kg)
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3
DIMM; packet buffer size: 1.5 MB dynamically
allocated
< 1.3 µs (LIFO 64-byte packets)
for details on
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 43
Page 44
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Environment
Electrical characteristics
Safety
Emissions
Immunity
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Non-operating/Storage
relative humidity
Altitude
Acoustic
Frequency
Maximum heat
dissipation
Voltage
Current
Maximum power rating
Idle power
Notes
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Generic
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency
magnetic field
Voltage dips and
interruptions
Harmonics
< 1.3 µs (LIFO 64-byte packets)
up to 4.1 million pps (64-byte packets)
5.6 Gbps
16000 entries
32°F to 113°F (0°C to 45°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft (3 km)
Power: 0 dB, Pressure: 0 dB
50/60 Hz
25 BTU/hr (26.38 kJ/hr)
100-127/200-240 VAC
0.5 A
7.2 W
4.5 W
Idle power is the actual power consumption of the
device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
EN 55024, CISPR 24
EN 55024, CISPR 24
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 61000-3-2, IEC 61000-3-2
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 44
Page 45
QuickSpecs
Technical Specifications
HP 2530 Switch Series
Management
Notes
Services
Flicker
IMC - Intelligent Management Center; command-line interface; Web browser;
configuration menu; Out-of-band management (serial RS-232C or MicroUSB);
IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB
IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af
apply to PoE+ models only. When using SFPs with this product, SFPs with
revision "B" or later (product number ends with the letter "B" or later, e.g.,
J4858B, J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SWupdates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
support and software updates (HR851E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
EN 61000-3-3, IEC 61000-3-3
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
DA - 14447 Worldwide — Version 2 — June 10, 2013
www.hp.com/networking/services
for details on
Page 45
Page 46
QuickSpecs
Technical Specifications
HP 2530 Switch Series
and response times in your area, please contact your local HP sales office.
Standards and protocols
(applies to all products in
series)
Denial of service
protection
Device management
General protocols
IP multicast
IPv6
MIBs
Network DoS Filter
RFC 1591 DNS (client)
SSHv1/SSHv2 Secure Shell
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.3 Type 10BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 868 Time Protocol
RFC 951 BOOTP
RFC 1350 TFTP Protocol (revision 2)
RFC 1542 BOOTP Extensions
RFC 2030 Simple Network Time Protocol (SNTP) v4
RFC 2131 DHCP
RFC 3376 IGMPv3 (host joins only)
RFC 1981 IPv6 Path MTU Discovery
RFC 2460 IPv6 Specification
RFC 2925 Remote Operations MIB (Ping only)
RFC 3315 DHCPv6 (client only)
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNS Extension for IPv6
RFC 4022 MIB for TCP
RFC 4113 MIB for UDP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
RFC 4252 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
RFC 4293 MIB for IP
RFC 4419 Key Exchange for SSH
RFC 4443 ICMPv6
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Auto-configuration
RFC 1213 MIB II
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 46
Page 47
QuickSpecs
Technical Specifications
Network management
QoS/CoS
Security
HP 2530 Switch Series
RFC 1493 Bridge MIB
RFC 2021 RMONv2 MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting Client MIB
RFC 2665 Ethernet-Like-MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2688 MAU-MIB
RFC 2737 Entity MIB (Version 2)
RFC 2863 The Interfaces Group MIB
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 1098 A Simple Network Management Protocol
(SNMP)
RFC 2819 Four groups of RMON: 1 (statistics), 2 (history),
3 (alarm) and 9 (events)
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
SNMPv1/v2c/v3
RFC 2474 DiffServ precedence, with 4 queues per port
RFC 2475 DiffServ Architecture
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2598 DiffServ Expedited Forwarding (EF)
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2138 RADIUS Authentication
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 47
Page 48
QuickSpecs
Accessories
HP 2530 Switch Series accessories
Transceivers
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X121 1G SFP LC LH Transceiver
HP X111 100M SFP LC FX Transceiver
HP X112 100M SFP LC BX-D Transceiver
HP X112 100M SFP LC BX-U Transceiver
HP X122 1G SFP LC BX-D Transceiver
HP X122 1G SFP LC BX-U Transceiver
HP X121 1G SFP RJ45 T Transceiver
HP 2530 Switch Series
J4858C
J4859C
J4860C
J9054C
J9099B
J9100B
J9142B
J9143B
J8177C
Mounting Kit
HP 2530-8G-PoE+ Switch
(J9774A)
HP 2530-8-PoE+ Switch
(J9780A)
HP 2530-8G Switch
(J9777A)
HP 2530-8 Switch
(J9783A)
HP X410 1U Universal 4-post Rack Mounting Kit
HP X510 1U Cable Guard
HP 2530 8-port Switch Power Adapter Shelf
HP X510 1U Cable Guard
HP 2530 8-port Switch Power Adapter Shelf
HP X510 1U Cable Guard
HP 2530 8-port Switch Power Adapter Shelf
HP X510 1U Cable Guard
HP 2530 8-port Switch Power Adapter Shelf
J9583A
J9700A
J9820A
J9700A
J9820A
J9700A
J9820A
J9700A
J9820A
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 48
Page 49
QuickSpecs
Accessory Product Details
NOTE:
Details are not available for all accessories. The following specifications were available at the time of publication.
HP 2530 Switch Series
HP X111 100M SFP LC FX
Transceiver
(J9054C)
Ports
Physical characteristics
Environment
Cabling
Notes
Services
1 LC 100BASE-FX port (IEEE 802.3u Type 100BASE-FX); Duplex: half or full
Dimensions: 2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x 1.22 cm)
Weight: 0.06 lb. (0.03 kg)
Operating temperature: 32ºF to 158ºF (0ºC to 70ºC)
Operating relative humidity: 5% to 95%
Nonoperating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC)
Nonoperating/Storage relative humidity: 5% to 85%
Altitude: up to 10,000 ft. (3 km)
Type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU-T G.651 and
ISO/IEC 793-2 Type A1b or A1a, respectively
Maximum distance:
2 km (full duplex) or 412 m (half duplex)
Transmitter wavelength: 1310nm
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the J9054B 100-FX SFP-LC
Transceiver" on the "HP Mini-GBICs and SFPs" Manuals Web page.
Refer to the HP website at
service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.
www.hp.com/networking/services
for details on the
HP X112 100M SFP LC BX-D
Transceiver
A small form-factor
pluggable (SFP) 100Megabit BX (bi-directional)
"downstream" transceiver
that provides 100 Mbps
full-duplex connectivity up
to 10 km on one strand of
singlemode fiber. The
J9099B connects to the
J9100B "upstream"
transceiver, or to any IEEEstandard 100BASE-BX10-U
("upstream") device.
(J9099B)
Ports
Physical characteristics
Environment
Cabling
DA - 14447 Worldwide — Version 2 — June 10, 2013
1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-D); Duplex: full
only
Dimensions
Weight
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
0.5-10,000 m (single-mode fiber)
2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22
cm)
0.04 lb. (0.03 kg)
32ºF to 158ºF (0ºC to 70ºC)
0% to 95%, noncondensing
-40ºF to 185ºF (-40ºC to 85ºC)
Page 49
Page 50
QuickSpecs
Accessory Product Details
HP 2530 Switch Series
HP X112 100M SFP LC BX-U
Transceiver
A small form-factor
pluggable (SFP) 100Megabit BX (bi-directional)
"upstream" transceiver
that provides 100 Mbps
full-duplex connectivity up
to 10 km on one strand of
singlemode fiber. The
J9100B connects to the
J9099B "downstream"
transceiver, or to any IEEEstandard 100BASE-BX10-D
("downstream")
device.
(J9100B)
Notes
Services
Ports
Physical characteristics
Environment
Cabling
Transmit wavelength: 1550 nm. Receive wavelength: 1310 nm.
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
The J9099B connects to the J9100B "upstream" transceiver, or to any IEEEstandard 100BASE-BX10-U ("upstream") device. (A 100-BX-D transceiver can
only connect to a 100-BX-U product. You cannot connect two 100-BX-D
transceivers together.)
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-U); Duplex: full
only
Dimensions
Weight
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
www.hp.com/networking/services
2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22
cm)
0.07 lb. (.03 kg)
32ºF to 158ºF (0ºC to 70ºC)
0% to 95%, noncondensing
-40ºF to 185ºF (-40ºC to 85ºC)
for details on
Notes
Services
0.5-10,000 m (single-mode fiber)
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
The J9100B connects to the J9099B "downstream" transceiver, or to any IEEEstandard 100BASE-BX10- D ("downstream") device. (A 100-BX-U transceiver
can only connect to a 100-BX-D product. You cannot connect two 100-BX-U
transceivers together.)
Transmit wavelength: 1310 nm. Receive wavelength: 1550 nm.
Power consumption is 1.1 watts maximum.
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 14447 Worldwide — Version 2 — June 10, 2013
www.hp.com/networking/services
for details on
Page 50
Page 51
QuickSpecs
Accessory Product Details
HP 2530 Switch Series
HP X121 1G SFP LC SX
Transceiver
A small form-factor
pluggable (SFP) Gigabit SX
transceiver that provides a
full-duplex Gigabit solution
up to 550 m on multimode
fiber.
(J4858C)
Ports
Physical characteristics
Environment
Electrical characteristics
Cabling
Services
1 LC 1000BASE-SX port; Duplex: full only
Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)
Power consumption typical: 0.4 W
Power consumption maximum: 0.7 W
Type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU-T G.651 and
ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:
2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
2-500 m (50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (50 µm core diameter, 500 MHz*km bandwidth)
Cable length: 2-550m
Fiber type: Multi Mode
Refer to the HP website at
service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.
www.hp.com/networking/services
for details on the
HP X121 1G SFP LC LX
Transceiver (J4859C)
HP X121 1G SFP LC LX
Transceiver: An SFP format
gigabit transceiver with LC
connectors using LX
technology.
Ports
Physical characteristics
Environment
Cabling
DA - 14447 Worldwide — Version 2 — June 10, 2013
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full only
Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight:0.04 lb. (0.02 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
Altitude: up to 10,000 ft. (3 km)
Type:
Either single mode or multimode; 62.5/125 µm or 50/125 µm
(core/cladding) diameter, graded-index, low metal content, multimode
fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or
A1a, respectively; Low metal content, single-mode fiber-optic,
complying with ITU-T G.652 and ISO/IEC 793-2 Type B1;
Maximum distance:
2-550 m (multimode 62.5 µm core diameter, 500 MHz*km bandwidth)
2-550 m (multimode 50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (multimode 50 µm core diameter, 500 MHz*km bandwidth)
2-10,000 m (single-mode fiber)
Page 51
Page 52
QuickSpecs
Accessory Product Details
HP 2530 Switch Series
HP X121 1G SFP LC LH
Transceiver
A small form-factor
pluggable (SFP) Gigabit LH
transceiver that provides a
full-duplex Gigabit solution
up to 70 km on singlemode fiber.
(J4860C)
Notes
Services
Ports
Physical characteristics
Environment
Cabling
A mode conditioning patch cord may be needed in some multimode fiber
installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical
Refer to the HP website at
service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics); Duplex:
full only
Dimensions: 2.17(d) x 0.60(w) x 0.46(h) in. (5.5 x 1.53 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)
Operating temperature: -40°F to 185°F (-40°C to 85°C)
Operating relative humidity: 0% to 95% @ 77°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)
Cable type:
Low metal content, single-mode fiber-optic, complying with ITU-T
G.652 and ISO/IEC 793-2 Type B1;
Maximum distance:
www.hp.com/networking/services
for details on the
Notes
Services
10-70,000 m (single-mode fiber)
Power consumption is 0.8 watts typical with 1 watt maximum at 100%
utilization.
For distances less than 20 km, a 10 dB attenuator must be used.
For distances between 20 km and 40 km, a 5 dB attenuator must be used.
Attenuators can be purchased from most cable vendors.
Refer to the HP website at
service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.
www.hp.com/networking/services
for details on the
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 52
Page 53
QuickSpecs
Accessory Product Details
HP 2530 Switch Series
HP X122 1G SFP LC BX-D
Transceiver
A small form-factor
pluggable (SFP) Gigabit-BX
(bi-directional)
"downstream" transceiver
that provides a full-duplex
Gigabit solution up to 10
km on one strand of
single-mode fiber. The
J9142B connects to the
J9143B "upstream"
transceiver, or to any IEEEstandard 1000BASE-BX10U ("upstream") device.
(J9142B)
Ports
Physical characteristics
Environment
Cabling
Notes
Services
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D); Duplex:
full only
Dimensions
Weight
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
0.5-10,000 m (single-mode fiber)
Transmit wavelength: 1490 nm. Receive wavelength: 1310 nm.
Power consumption is 1 watt maximum.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
The J9142B connects to the J9143B "upstream" transceiver, or to any IEEEstandard 1000BASE-BX10-U ("upstream") device. (A 1000-BX-D transceiver
can only connect to a 1000-BX-U product. You cannot connect two 1000-BX-D
transceivers together.)
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18
cm)
0.04 lb. (0.02 kg)
32ºF to 158ºF (0ºC to 70ºC)
0% to 95%, non-condensing
–40ºF to 185ºF –40ºC to 85ºC)
www.hp.com/networking/services
for details on
HP X122 1G SFP LC BX-U
Transceiver (J9143B)
A small form-factor
pluggable (SFP) Gigabit-BX
(bi-directional) "upstream"
transceiver that provides a
full-duplex Gigabit solution
up to 10 km on one strand
of single-mode fiber. The
J9143B connects to the
J9142B "downstream"
transceiver, or to any IEEEstandard 1000BASE-BX10D ("downstream")
device.
Ports
Physical characteristics
Environment
Cabling
Notes
DA - 14447 Worldwide — Version 2 — June 10, 2013
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U); Duplex:
full only
Dimensions
Weight
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
0.5-10,000 m (single-mode fiber)
Transmit wavelength: 1310 nm. Receive wavelength: 1490 nm.
2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18
cm)
0.04 lb. (0.02 kg)
32ºF to 158ºF (0ºC to 70ºC)
0% to 95%, non-condensing
–40ºF to 185ºF –40ºC to 85ºC)
Page 53
Page 54
QuickSpecs
Accessory Product Details
Services
HP 2530 Switch Series
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
The J9143B connects to the J9142B "downstream" transceiver, or to any IEEEstandard 1000BASE-BX10-D ("downstream") device. (A 1000-BX-U
transceiver can only connect to a 1000-BX-D product. You cannot connect two
1000-BX-U transceivers together.)
Power consumption is 1 watt maximum.
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
www.hp.com/networking/services
for details on
HP X121 1G SFP RJ45 T
Transceiver
A small form-factor
pluggable (SFP) Gigabit
copper transceiver that
provides a full-duplex
Gigabit solution up to 100
m on Category 5 or better
cable
(J8177C)
Ports
Physical characteristics
Environment
Cabling
Notes
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T); Duplex: full only
Dimensions: 0.54(w) x 2.71(d) x 0.55(h) in (1.37 x 6.88 x 1.4 cm)
Weight: 0.06 lb (0.03 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C); with 100 LFM airflow over
the SFP module
Operating relative humidity: 0% to 95% @ 75°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 95% @ 77°F (25°C),
noncondensing
Altitude: up to 10,000 ft. (3000 km)
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
100 m
Power consumption is nominally 1 watt.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the J8177C 1000Base-T MiniGBIC" on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J8177C Gigabit copper mini-GBIC is not supported on dual-personality
ports.
The J8177C is capable of 100 Mb operation. This is supported on only the HP
ProCurve Switch 8200zl, 5400zl, and 6200yl Series using software version
K.12.21 or later. Use the "auto-100" port setting to enable 100 Mb operation.
Important: Important: The earlier J8177B does not support 100 Mb operation.
When used in the ProCurve Switch gl 20-Port 10/100/1000 Module (J4908A),
the J8177C mini-GBIC can be installed in either the upper or lower mini-GBIC
port, but will block access to the other port.
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 54
Page 55
QuickSpecs
Accessory Product Details
HP 2530 Switch Series
HP X410 1U Universal 4-post Rack Mounting Kit
Notes
Services
HP 2530 8-port Switch
Power Adapter Shelf
(J9820A)
The rack mounting kit supports the 1U, full width switches in the following switch series and the power
supply: V1810 Series, E2510 Series, E2520 Series, E2610 Series, E2810 Series, E2910 Series, E3500
Series, and the E620 Power Supply
This universal rack mounting kit is design to fit the following racks: HP 10K 10642, HP 10K 10842, Panduit
CN, Panduit CS, Wrightline Vantage S2, APC Netshelter 600mm, and APC Netshelter 800mm. It may well fit
many other brands and models too.
Refer to the HP website at:
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
Physical characteristics
Notes
Services
(J9583A)
www.hp.com/networking/services
Weight
The HP 2530 8-Port Switch Power Adapter Shelf is an accessory for the HP
2530 8-port switches. The shelf mounts on the back of the switch providing a
place to hold the external power adapter.
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
for details on the service-level descriptions
6.75(w) x 5.25(d) x 1.75(h) in (17.15 x 13.34 x 4.45
cm) (1U height)
0.6 lb (0.27 kg)
www.hp.com/networking/services
for details on
To learn more, visit hp.com/networking
© Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
Microsoft is a U.S. registered trademark of Microsoft Corporation.
DA - 14447 Worldwide — Version 2 — June 10, 2013
Page 55
Loading...