The content in this document is for information purpose and is subject to change
without prior notice. We made ev ery effort to ensure that this User Guide is
accurate and complete.
However, no liability is assumed for any errors and omissions that may have
occurred.
The manufacturer reserves the right to change the technical specifications without
prior notice.
FCC Statement
This equipment has been tested an d found to comply with the limits for a Class B
digital camcorder, pursuant to Pa rt 15 of t he FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment genera tes, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different fro m that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This camcorder complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This camcorder may not cause harmful interference,
and (2) this camcorder must accep t any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could v oid the user's authority to operate this
equipment.
3
WEEE Notice
Disposal of Waste Electrical a nd Elect ronic Equipment and/or Battery
by users in private households i n the European Union
This symbol on the product or on the packaging indicates that this
cannot be disposed of as a household waste. You must dispose of your
waste equipment and/or battery by handling it over to the appl icable
take-back scheme for the recy cling of electrical and electronic
equipment and/or battery. For more information about recy cling of this
equipment and/or battery, please contact your city office, the shop
service. The recycling of materials will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and environment.
where you purchased the equipment or your household waste disposal
CE Regulatory Notice
The product herewith complies with the requirements of the Low Voltage Directive
2006/95/EC, the EMC Directive 2014/30/EU, the R&TTE Directive 1999/5/EC and the
RoHS Directive 2011/65/EC.
Battery warning
Never dismantle, crush, or pierce the battery, or allow the battery
to short-circuit. Do not expose battery being placed in high
temperature environment, if battery leaks or bulges, stop continue
to use.
Always charge using the system. Risk of explosion if battery is
replaced by an incorrect type.
Keep the battery out of reach of children.
Batteries may explode if exposed to open fire. Never dispose of
batteries in a fire.
Never replace the battery on your own; have the dealer do it for
you.
Disposed of used batteries observing local regulations.
4
Notes on Installation
Before you start using the system, it is assumed that you
1. This product shall be installed near the rear view mirror, at the
center and top of windshield for optimal viewing.
2. Make sure that the lens is within the wiping range of the
windscreen wiper to ensure a clear view even when it rains.
3. Do not touch the lens with your fingers. Finger grease may be left
on the lens and will result in unclear videos or snapshots. Clean
the lens on a regular basis.
4. Do not install the camcorder on a tinted window. Doing so may
damage the tint film.
5. Make sure that the installation position is not hindered by the
tinted window.
6. To use the products of the attached power charger only, please do
not use other brand power charger, in order to avoid equipment
burn or cause the battery explosion.
Caution
Due to local laws and vehicles safety considerations, do not
operate the camcorder while driving.
Set up time and date accurately before you use this camcorder.
The firmware function in the camcorder is for reference only,
please follow the actual road condition.
The system is used only for non-commercial use, within the
maximum limits permitted by applicable law. Our company does
not accept any responsibility for any data loss during the
operation.
This product gets warm when in use; this is normal.
Improper use or operation of the product may result in damage of
the product or its accessories and void the warranty.
agree to the above statement.
5
6
1 Introduction
Thank you for purchasing this advanced Car Recorder. This camcorder is
specifically designed for real time video recording when driving.
1.1 Features
• Full HD recording videos (1920x1440@30fps)
• 2.31” LCD color screen
• Wide angle lens
• Multifunction traffic safety reminder
• Automatic Emergency recording for collision detection
• Supports micro SDHC memory cards class 10 speed or greater up to
32GB.
1.2 Package Contents
The package contains the following items. In case there is any missing or
damaged item, contact your dealer immediately.
Car Camcorder Quick start guide
CD-ROM Bracket Car adapter
7
1.3 Product Overview
8
4
5
7
1
2
3
0
1
1
1
6
No. Item No. Item
1 Bracket Socket 8 Enter Button ()
2 Power Switch 9 Speaker
3 Memory Card Slot 10 Wide Angle Lens
4 USB / Power Connector 11 Microphone
5 Back Button ( ) 12 LED Indicator
6 Up Button ( ) 13 LCD Panel
7 Down Button ( )
9
12
13
2 Getting Started
2.1 Inserting the Memory Card
Insert memory card with the gold section facing upward and the screen
of the camcorder facing upward too, as illustrated. Push the memory
card in until a click sound is heard, indicating the card is in position.
To remove the memory card
Push to eject the memory card out of the slot.
Note:
1. Do not remove or insert the memory card when the camcorder is turned on. This may damage the
memory card.
2. Please use a Class 10 or higher rating Micro SD card, max. up to 32GB.
3. Please format the micro SD cards before the initial use.
4. When removing the memory card, please take note that the memory card will be ejected quickly
and may get lost. This is a characteristic of the memory card ejection slot to facilitate easy removal
by the user.
8
2.2 Installing in Vehicles
2.2.1 Mount to Windshield
1. Attach the bracket to the camcorder.
Slide it into the bracket holder until you hear
a click.
2. Before installing the bracket, please
use alcohol to clean the windshield
and suction cup of the bracket. Wait
for dry and press suction-cup on the
windshield.
3. Hold the base firmly on the
windshield and press down the
clamp to mount the car holder to the
windshield. Make sure the base is
securely locked in place.
9
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.