UK Grass-Roller 2,9m 22/05-2018
Table of contents
EC DECLARATION OF CONFORMITY ................................................................................................................................ 3
DELIVERY CHECK ................................................................................................................................................................... 4
MACHINE DESCRIPTION ............................................................................................................................................................... 4
TECHNICAL SPECIFICATIONS ............................................................................................................................................. 5
SAFETY INSTRUCTIONS ................................................................ ................................................................ ......................... 6
GENERAL INFORMATION ............................................................................................................................................................. 6
TRANSPORT ON PUBLIC ROADS .................................................................................................................................................... 6
FRONT AXLE LOAD ...................................................................................................................................................................... 6
SAFETY - AND OTHER MARKINGS ON THE MACHINE .................................................................................................................... 7
OPERATION INSTRUCTIONS ................................................................................................................................................ 8
ATTACHMENT ............................................................................................................................................................................. 8
SETTINGS AND ADJUSTMENT .............................................................................................................................................. 9
LONG FINGER HARROW ............................................................................................................................................................... 9
LEVELLING BOARD .................................................................................................................................................................... 10
ROLLER SCRAPER ...................................................................................................................................................................... 10
MAINTENANCE ....................................................................................................................................................................... 11
LUBRICATION ............................................................................................................................................................................ 11
LUBRICATION POINTS ................................................................................................................................................................ 11
REPAIRS .................................................................................................................................................................................... 11
SPRING-BOARD ....................................................................................................................................................................... 12
SPARE PARTS LIST ................................................................................................................................................................. 13
DRAWBAR ................................................................................................................................................................................. 13
DRAWBAR EXTENSION .............................................................................................................................................................. 14
ROLLER BAR ............................................................................................................................................................................. 15
WHEEL FRAME .......................................................................................................................................................................... 16
ROLLERS ETC.......................................................................................................................................................................... 17
STAR ROLLER ............................................................................................................................................................................ 17
CAMBRIDGE ROLLER ................................................................................................................................................................. 18
PLAIN ROLLER ........................................................................................................................................................................... 19
LONG FINGER HARROW ............................................................................................................................................................. 20
LEVELLING BOARD .................................................................................................................................................................... 22
SPRING-BOARD ......................................................................................................................................................................... 23
LIGHT KIT .................................................................................................................................................................................. 25
LIGHT KIT: EL. DIAGRAM .......................................................................................................................................................... 26
HYDRAULICS ........................................................................................................................................................................... 26
NOTES ........................................................................................................................................................................................ 26
2
UK Grass-Roller 2,9m 22/05-2018
EC DECLARATION OF CONFORMITY
in accordance with the EU Machinery Directive 2006/42/EC
applicable as from December 29th 2009:
HE-VA ApS
N. A. Christensensvej 34,
DK-7900 Nykøbing Mors
hereby confirms that the following machine has been manufactured in accordance with the Council Directive 2006/42/EC.
The declaration comprises the following machine:
Grass – Roller 2,9 m
Nykøbing, December 29th 2009
Villy Christiansen
The undersigned is furthermore authorised to compile technical documentation for the above machine.
3
UK Grass-Roller 2,9m 22/05-2018
Delivery check
Check the roller for any damage. Check the hydraulic hoses for cuts and squeezing damage. Check also
that the other hydraulic components have not been damaged during transport.
Check that the frame construction has not been damaged. You should also check that the roller blocks
have not been exposed to impacts, which may have damaged the roller tube or the double-sealed ball
bearings.
Finally check that the transport wheel nuts are tightened and OK. Check the air pressure in the tyres:
approx. 3.8 bar/55 psi.
Machine description
Grass-Roller is a roller for consolidation of grassland. With water in the smooth steel rollers a high
weight is achieved and with that effective consolidation which guarantees an evenly pressed
grassland. This helps achieve the highest yield from the grass and good quality clean silage without
soil, stones, spores etc. With a hydr. long finger harrow in 2 rows mounted in front of the GrassRoller the grass can be ripped out and dead thatch can be removed or divided into fine particles.
The Grass-Roller can be equipped with Spring-Board levelling bar or molehill bar mounted on the
long finger harrow for levelling of molehills, cow pats etc., which helps avoid ingress of soil and
foreign matter into fodder when harvested. Add a HE-VA Multi-Seeder onto the Grass-Roller and
grass or other seeds can be drilled at the same time as the consolidation. This allows complete
reseeding, and overseeding or patching in existing pastures.
4
Working
width
Roller type /
Ring type
No. of
spokes
Weight
without
equipm.
and
without
water
Weight
without
equipm.
with
water
Power
requirement
HP
Transport
width
Total
length
Lift mounted:
2,90m
710mm Plain roller
1.035
1.995
80-120
3,00 m
3,55 m
2,90m
620mm/24” Camb.
5S
1.510
-
80-120
3,00 m
3,55 m
2,90m
550/600 mm Star ring
1.440
-
80-120
3,00 m
3,55 m
Trailed:
* 2,90m
710mm Plain roller
1.515
2.475
50-70
3,00 m
4,60 m
* 2,90m
620mm/24” Camb.
5S
1.990
-
50-70
3,00 m
4,60 m
* 2,90m
550/600 mm Star ring
1.920
-
50-70
3,00 m
4,60 m
* The machine requires 1 double-acting oil outlet
Tine spacing
Cm
8,5
Maximum forward speed:
Km/h
25
Electrical system:
Battery voltage:
V
12
Plug for lights:
7 – poles
Hydraulic system:
Ma. working pressure:
Bar
220
Pump effect:
L/min
Min 15
Oil type:
Hydro Texaco HD32
UK Grass-Roller 2,9m 22/05-2018
Technical specifications
5
UK Grass-Roller 2,9m 22/05-2018
Safety instructions
General information
Do not start-up the machine if there are persons in exposed positions* within a hazardous area**.
When persons are in exposed positions (e.g. in connection with adjustment, maintenance, attachment
and uncoupling), the following conditions must be observed:
The machine must be lowered to firm ground.
The hydraulics must be relieved.
The tractor must be stopped and the key removed from the ignition switch.
The driver must ensure that no persons are staying in exposed positions during the operation.
* Persons in exposed positions: Any person who is staying wholly or partly within a
hazardous area.
** Hazardous area: On and under the machine within a distance of 4 m from the machine.
Most accidents that happen in connection with the operation, transport and maintenance of machines
are caused by non-compliance with the most elementary safety conditions.
Therefore it is vital that anybody working at the machine carefully complies with the safety
instructions as well as other instructions applying to the machine.
The machine may only be operated, maintained and repaired by persons, who are familiar with this
work and who are further familiar with the possible elements of danger with this particular machine.
Transport on public roads
Check before transport on public roads that the attachment of the machine at the tractor is in
accordance with the local rules and regulations in force (permitted total weight, permitted axle load,
transport width, lights, warning signs, etc.).
Front axle load
After the attachment of the machine and at maximum load, the driving properties of the tractor must be
checked. Check that the front axle is sufficiently loaded. As a minimum, the front axle load must be
20% of the tractor weight. Permitted axle load and permitted total weight for the tractor must always
be observed.
NB! The driving, controlling and braking properties are affected by the attached machine
combination.
6
Study the Operating Instructions thoroughly before any
operation of the machine and observe all safety instructions.
Plate with serial number and year of manufacture.
Indication label for the machine’s hydraulic systems.
Red: Wheel frame
Green: Extra equipment
Empty the water out of the rollers before the temperature gets
below 0 C°.
If this is not observed, our guarantee obligations will no
longer apply.
Tighten up the bolts regularly.
If this is not observed, our guarantee obligations will no
longer apply.
Maximum torque in Nm. w/lubricated thread
Metric thread
Quality 8.8
Quality 10.9
Quality 12.9
M10x1,5
47
65
79
M12x1,75
81
114
136
M14x2,0
128
181
217
M16x2,0
197
277
333
M18x2,5
275
386
463
M20x2,5
385
541
649
M22x2,5
518
728
874
M24x3,0
665
935
1120
Wheel bolt M18x1,5 fine-threaded
433 Nm
Wheel bolt M22x1,5 fine-threaded
803 Nm
UK Grass-Roller 2,9m 22/05-2018
Safety - and other markings on the machine
.
7
Check that the towing hook height is between
500 and 550 mm.
UK Grass-Roller 2,9m 22/05-2018
Operating instructions
Attachment
On delivery the roller is in transport position. At start-up the roller is attached to the tractor.
Important:
Raise the support leg and place it in the transport fittings on top of the drawbar. Now fit all the
hydraulic hoses.
The trailed model requires 1 double-acting oil outlet.
The hoses for the wheel frame are provided with red cable straps.
The hoses for the long finger harrow are provided with green cable straps. (extra equipment)
8
1
1
UK Grass-Roller 2,9m 22/05-2018
Settings and adjustment
Long finger harrow
The long finger harrow is raised and lowered with the hydraulic system, marked with green colour.
During work the long finger harrow can be raised and lowered as required. However, take care that
the harrow does not work too deeply, meaning that it will carry the whole weight of the roller.
The front harrow is to operate in horizontal position when the machine is in working position. This is
adjusted on the parallel rods, by loosening the nuts on each parallel rod and by tightening on the
opposite side.
Each tine can be worn approx. 200 mm. However, they will be less flexible and may need earlier
replacement.
9
2
1 1 2
1
1
2
1
1
2
UK Grass-Roller 2,9m 22/05-2018
Levelling board
The levelling board is raised in proportion to the wear and tear of the tines. This is performed by
loosening 2 nuts , the using a 19 mm spanner on the thread spindle, which determines the height
When the desired height is reached, the 2 nuts are tightened again .
Be sure that all adjusters are set the same, otherwise the levelling board will operate unevenly. This is
easily done by measuring the length of the spindle.
Roller scraper
The scrapers are bolted on the end plates. In order to adjust the scraper bar loosen the 2 bolts at the
top and push the scraper bar against the roller . Please be aware that the scraper bar is to be
placed 5 – 10 mm from the roller.
10
Oil, type Hydro Texaco HD32 has been filled in the hydraulic system.
The piston rods are to be lubricated with grease, for long term storage.
After every approx. 10 working hours the wheels, ball bearings and
stop rings are tightened. Hoses, fittings and cylinders are inspected
for eventual leaks and are tightened too.
UK Grass-Roller 2,9m 22/05-2018
Maintenance
Lubrication
Important:
After every approx. 10 working hours all movable parts. After every 30 working hours the tip
cylinder’s pins and the 3 pins in the drawbar are to be lubricated.
The bearings of the roller are to be lubricated after every 100 working hours and/or after cleaning.
Lubrication points
Important:
After the season, the roller is to be cleaned and lubricated with grease and oil.
Empty the water from the rollers to avoid frost damage.
Important:
Repairs
All repairs are to be performed with original HE-VA spare parts.
11
UK Grass-Roller 2,9m 22/05-2018
Spring-Board
The Spring-Board requires 1 double-acting hydraulic outlet on the tractor. The tine angle and thereby the
aggressiveness of the tines is hydraulically controlled from the driver's cab and the depth control is done
manually. The Spring-Board tine bar is adjustable in height and thereby the working angle of the tines
against the ground is being changed. The tines work independently, but may be connected by means of a
transverse locking system (extra equipment) if a greater levelling effect is required. The change-over is
done very easily and quickly without any tools.
12
Pos.
Item no.
Designation
2,9m
1
1200020
Drawbar
1
2
690141095
Support leg 3500 kg
1
3
1030280
Pin for support leg Ø16 L=94
1
4
0377400
R-clip Ø4, galvanized
1
5
690136029
Lubricating nipple M8
1
6
630757028
Cpl. drawbar with Ø50 turnable draw eye
1
7
0235851
Bolt M16x65 10.9
6 8 0272290
Facet plate Ø16
12
9
0264090
Locking nut M16
6
10
7345010
Cpl. antenna support w/bolts
1
11
7345003
Antenna support, top part
1
12
7345004
Antenna support, bottom part
1
13
0235360
Set screw M12x40 8.8 DIN 933
2
14
0272270
Facet plate Ø12
4
15
0264070
Locking nut M12 DIN985
2
16
69528096J
Pin Ø28 L=96 w/Ø40 head
2
17
690134004
Ring pin Ø10x40
2
18
0246060
Carriage bolt M6x16 DIN 603
4
19
0272240
Facet plate Ø6
8
20
0264040
Locking nut M6
4
UK Grass-Roller 2,9m 22/05-2018
Spare parts list
Drawbar
13
Pos.
Item no.
Designation
2,9m
1
1200001
Cpl. extended drawbar
1
2
1200050
Support leg
1 3 1030280
Pin for support leg Ø16 L=94
1
4
0377400
R-clip Ø4, galvanized
1
5
690302011
Top link for 36.01 – 55.01 heavy model (36x3,0 430-620 mm)
1
6
690134004
Ring pin Ø10x40
5
7
69525140F
Pin Ø25 L=61 welded facet plate and clip hole
1
8
69525097J
Pin Ø25 L=97 Pin for top link, w/Ø28 head (Cat.II)
2
9
690110404
U-bolt M18x100x100x100
4
10
0272300
Facet plate Ø18
8
11
0264100
Locking nut M18
8
12
69528096J
Pin Ø28 L=96 w/Ø40 head
2
13
630410050
Parking device for hose
1
14
0234790
Bolt M8x40 8.8
2
15
0272250
Facet plate Ø8
4
16
0264050
Locking nut M8
2
UK Grass-Roller 2,9m 22/05-2018
Drawbar extension
14
Pos.
Item no.
Designation
2,9m
1
1200002
Roller bar 2,9m
1
2
1200050
Support leg
1
3
1030280
Pin Ø16 L=94
1 4 0377400
R-clip Ø4
1
5
1200034
Top link between roller bar and draw bar
1
6
690200085
Cylinder 80/40x255 Ø30/Ø30
1 7 69430130G
Pin Ø30 L=130
1
8
69430094G
Pin Ø30 L=94
1
9
630532600
Bush 2 10
690101101
Bolt M12x25 8.8 with glue
2
11
69528096J
Pin Ø28 L=96 w/Ø40 head
2
12
690134004
Ring pin, Ø10
3
13
6952597J
Pin Ø25 L=97 w/Ø40 head
1
UK Grass-Roller 2,9m 22/05-2018
Roller bar
15
Pos.
Item no.
Designation
2,9m
1
30935000
Wheel frame
1
2
69435700G
Pin Ø35 L=700
1 3 690200085
Cylinder 80/40x255 Ø30/Ø30
1 4 69430130G
Pin Ø30 L=130
1 5 69430095G
Pin Ø30 L=95
1 6 690136029
Lubricating nipple M8
4 7 690101101
Bolt M12x25 8.8 with glue
3 8 630532600
Bush 3 9
690142001
Warning triangle
1
10
0272230
Facet plate Ø5
2
11
0233860
Set screw M5x20 8.8
1
12
0264030
Locking nut M5
1
13
690141310
Wheel 10.0/75x15,3 – 10 ply
2
14
690141025
Hub 1700 kg 6-M18/160-205
2
15
690141055
Hub nut M18
12
16
690141039
Hub bolt M18x1,5x49
12
17
690141314
Hub cap Ø62
2
UK Grass-Roller 2,9m 22/05-2018
Wheel frame
16
Pos.
Item no.
Designation
2,9m
1
678632908
Axle Ø60 L= 2900
1 2 0478971
Bearing UCF 312 (Ø60)
2
3
0236140
Bolt M20x65 8.8
8 4 0272310
Facet plate 20 mm
16 5 0264110
Locking nut M20
8
6
671040400
Stop ring w/bolt
2 7 671040402
Stop ring 15 mm
2
8
690150112
Mounting disc for star ring
1
9
690150065
Star ring Ø600 Center Ø135
27
10
690150066
Star ring Ø550 w/neck Ø60
27
11
690150090
Adjustment shim 15 mm cpl. with bolts and nuts
11a
690150099
Adjustment shim 20 mm cpl. with bolts and nuts
11b
690150091
Adjustment shim 25 mm cpl. with bolts and nuts
UK Grass-Roller 2,9m 22/05-2018
Rollers etc.
Star roller
17
Pos.
Item no.
Designation
6,3m
1
678632908
Axle Ø60 L= 2900
1
2
0478971
Bearing UCF 312 (Ø60)
2 3 0236140
Bolt M20x65 8.8
8 4 0272310
Facet plate 20 mm
16
5
0264110
Locking nut M20
8 6 671040400
Stop ring w/bolt
2 7 671040402
Stop ring 15 mm
2
8
690150049
Cambridge ring, plain Ø620mm
26
9
690150059
Cambridge ring, serrated Ø620/Ø60
25
10
690150090
Adjustment shim 15 mm cpl. with bolts and nuts
10a
690150099
Adjustment shim 20 mm cpl. with bolts and nuts
10b
690150091
Adjustment shim 25 mm cpl. with bolts and nuts
UK Grass-Roller 2,9m 22/05-2018
Cambridge roller
18
Pos.
Item no.
Designation
2,9m
1
630257110
Roller 2,9 m
1 2 690203320
Bushing 1½” – ¾” - black
2 3 690203320
Plug ¾” RG - black
2
4
0478971
Bearing UCF 312 (Ø60)
2 5 630257113
Scraper bar
1 6 0236140
Bolt M20x65 8.8
4
7
0236160
Bolt M20x75 8.8
4 8 0272310
Facet plate 20 mm
16
9
0264110
Locking nut M20
8
UK Grass-Roller 2,9m 22/05-2018
Plain roller
19
UK Grass-Roller 2,9m 22/05-2018
Long finger harrow
20
Pos.
Item no.
Designation
2,9m
1
1200046
Harrow frame 2,9m
1 2 0426110
Long finger tine Ø12 100 curved
31
3
690110050
U-bolt M12x40x40x40
31 4 0272270
Facet plate 12mm
62 5 0264070
Locking nut M12
62
6
1012521
Tine holder f/long finger tine
31 7 1200042
Lift frame
1 8 690200040
Cylinder 50/30x155mm Ø20/Ø20
2
9
690136001
Lubricating nipple M6
2
10
69520162F
Pin Ø20 L=162
2
11
0272310
Facet plate Ø20
4
12
690130132
Roll pin Ø6x40
4
13
69520087F
Pin Ø20 L=87
2
14
0236230
Bolt M20x140 8.8
2
15
0272310
Facet plate Ø20
2
16
0264110
Locking nut M20
2
17
690110404
U-bolt M18x100x100x100
4
18
0272300
Facet plate Ø18
8
19
0264100
Locking nut M18
8
20
630327521
Parallel arm
2
21
690112015
Bolt M20x150 8.8 set bolt
2
22
630327251
Angle block
2
23
0272310
Facet plate Ø20
12
24
0261410
Nut M20
4
25
0236230
Bolt M20x140 8.8
2
26
0264110
Locking nut M20
4
27
0236170
Bolt M20x80 8.8
2
28
1200053
2 x extra bars
1
29
0235380
Bolt M12x50 8.8
4
30
0272270
Facet plate Ø12
8
31
0264070
Locking nut M12
4
UK Grass-Roller 2,9m 22/05-2018
21
Pos.
Item no.
Designation
2,9m
1
1200044
Levelling board 2830
1 2 0422146
Spring-Board tine 90x14mm
2 3 0422395
Tine holder for tine 90x14
2
4
690103098
Bolt M12x11 10.9
2
5
0272270
Facet plate 12mm
4 6 0264070
Locking nut M12
2
7
0235380
Bolt M12x50 8.8
8 8 0272270
Facet plate 12 mm
16 9 0264070
Locking nut M12
8
10
630286185
Plate for height adjustment
2
11
630367169
Clamping plate with bar
2
12
630367165
Clamping plate
2
13
630327199
Threaded block for height adjustment
2
14
630327217
Threaded rod for height adjustment
2
15
0248680
Carriage bolt M12x50 8.8
4
16
0235380
Bolt M12x50 8.8
4
17
0272270
Facet plate 12mm
8
18
0264070
Locking nut M12
4
UK Grass-Roller 2,9m 22/05-2018
Levelling board
22
UK Grass-Roller 2,9m 22/05-2018
Spring-Board
23
Pos.
Item no.
Designation
2,9m
1
1200037
Suspension f/harrow with Spring-Board
1 2 630367120
Suspension f/cylinder
2
3
1200040
Suspension f/Spring-Board, left
1 4 1200041
Suspension f/Spring-Board, right
1 5 1200051
Spring-Board bar
1
6
690200160
Cylinder 50/30x155 mm Ø20/yoke
2
6a
690200046
Gasket set 50/30
7
690110404
U-bolt M18x100x100x100
4
8
0272300
Facet plate Ø18
8
9
0264100
Locking nut M18
8
10
0235810
Set screw M16x50 8.8
8
11
0272900
Facet plate Ø16
16
12
0264090
Locking nut M16
8
13
69520095F
Pin Ø20 L=95 welded facet plate and clip hole
4
14
0272310
Facet plate Ø20
4
15
0371395
Retaining pin Ø5x35 DIN481
4
16
69520046D
Pin Ø20 L=46 w/locking ring groove
2
17
690115010
Washer Ø20/Ø28x1
4
18
691372020
Locking ring Ø20 DIN471
4
19
0489610
Plastic plug 70x70x5
2
20
0489660
Plastic plug 100x100x5
2
21
0422145
Spring-Board tine 80x10 mm
12
22
0422390
Tine holder (tine 80x10 – bar 70x70)
12
23
690103098
Bolt M12x110 10.9
12
24
0264070
Locking nut M12
36
25
0272270
Facet plate Ø12
36
26
0248670
Carriage bolt M12x45
24
27
633052100
Spring-Board wearing point, flat
12
28
633052150
Spring-Board, slicing point
12
UK Grass-Roller 2,9m 22/05-2018
24
Pos.
Vare nr.
Betegnelse
Antal
1
7357505
Lightbox (L)
1
7357508
Lightbox (R)
1
2
7357504
Rear light
2
3
0264030
Locking nut M5
16
4
7357507
Marking lights (L)
1
7357509
Marking lights (R)
1
5
0234340
Bolt M5x25
4
6
0272240
Facet plate Ø5
8
7
0656240
Reflex, yellow
2
8
0656250
Reflex, white
2
9
692160017
Reflex, red
2
10
0234330
Bolt M6x20
4
11
7357516
Bracket
2
12
0272250
Facetskive Ø8
16
13
0264050
Locking nut M8
8
14
0234750
Bolt M8x20
4
15
690160080
Cable 5 x 1mm² (Inform about lenght by ordering sparepart)
16
7357545
Rutaseal nipple M20 8-12mm Grey RAL7001
2
17
690160070
Plug 7 poles DIN 72 577 – ISO 1724
1
18
7357546
Rubberbushing Nr. 38A Ø10/3 black
1
19
0520492
Junction box 105x105x60
1
UK Grass-Roller 2,9m 22/05-2018
LED Light kit
Notice:
Check number and measurements of all hoses before ordering spare parts.
25
UK Grass-Roller 2,9m 22/05-2018
Light kit: El. diagram
Hydraulics
Notes
26
UK Grass-Roller 2,9m 22/05-2018
27
The design is subject to modification without notice.
Loading...