Hestan KSO30, KDO30, KWD30, KMWC24 Flush Mount Installation Instructions
SUPPLEMENTAL
INSTRUCTIONS -
FLUSH-MOUNTING
OF WALL APPLIANCES
APPLIES TO MODELS:APPLIES TO MODELS:
3
WALL OVEN - KSO
WARMING DRAWER - KWD
MICROWAVE OVEN - KMWC
0
There are two styles of flush-mounting your wall appliances There are two styles of flush-mounting your wall appliances
(wall oven + warming drawer + microwave). (wall oven + warming drawer + microwave).
CABINET DEPTH AND CUTOUT DIMENSIONS ARE CABINET DEPTH AND CUTOUT DIMENSIONS ARE
WHICH STYLE YOU CHOOSE. WHICH STYLE YOU CHOOSE.
This supplement shows examples on the next pages with appropriate cutouts and dimensions. You
must still follow the installation manuals that came with your appliances and mounting kits. All
appliances shown in this supplement are mounted on 3/4” [2 cm] thick plywood platforms.
IMPORTANT - READ ALL INSTRUCTIONS BEFORE YOU BEGIN
THE INSTRUCTIONS HEREIN ARE A GUIDE FOR THE CABINET-MAKER AND/OR INSTALLER
OF THE APPLIANCES. INSTALLATION OF THE APPLIANCES SHOULD BE PERFORMED BY A
QUALIFIED SERVICE TECHNICIAN.
ELECTRICAL PARTS & COMPONENTS – DISCONNECT ALL POWER
SUPPLIES BEFORE SERVICING. UNITS MUST BE UNPLUGGED FROM
THE POWER OUTLET, OR THE ELECTRICAL BREAKER SHUT OFF. YOU
WILL NEED TO MOVE THE APPLIANCES AWAY FROM THE WALL FOR ACCESS.
3
/KDO
0
3
0
24
DIFFERENTDIFFERENT
DEPENDING ON DEPENDING ON
EN
IN ALL CIRCUMSTANCES, FOLLOW THE INSTRUCTIONS PROVIDED WITH THE APPLIANCES
AND KITS. THIS DOCUMENT IS ONLY A SUPPLEMENT.
MOUNTING STYLE A - STANDARD MOUNT WITH FLUSH FRONTS
This mounting style has all the appliance doors flush to each other (wall oven + warming drawer +
microwave). The appliance doors
STANDARD CABINETS ARE BUILT TO A DEPTH OF 24” (not including the
face-frame, which is typically 3/4” thick). Follow the installation instructions
for each appliance and kit for location of electrical supply / outlets.
The arrangement shown features the following products and kits:
Convection Microwave KMWC24
Microwave Built-In Kit AKMWCK30
Microwave Spacer Kit AKMWSK
Single Wall Oven KSO30
Warming Drawer KWD30
This arrangement will leave approximately 25/32” vertical gap between each appliance door face
(see next page). Please note the use of a 1-1/4” wood spacer beneath the Microwave Built-In Kit.
ARE NOTARE NOT
inset into the cabinetry.
©2020 Hestan Commercial Corporation
1
EN
"
"
2
1
2
"
9
1
4
"
3
4
"
27
3
8
"
19
3
4
"
3
4
"
MOUNTING STYLE A - STANDARD MOUNT WITH FLUSH FRONTS
CABINET
FACE-FRAME
3/4” TYP.
3/4" thick plywood
BUILT-IN KIT, CONVECTION MICROWAVE (AKMWCK30)
STANDARD
INSTALLATION
WITH
BUILT-IN KIT &
SPACER KIT
25
" GAP
32
CONVECTION
MICROWAVE
SPACER KIT, MICROWAVE (AKMWSK)
BUILT-IN KIT, CONVECTION MICROWAVE (AKMWCK30)
1-1/4" wood spacer
3/4" thick plywood
SINGLE
WALL
OVEN
24"
19
3
4
2
25
" GAP
32
11
5
32
©2020 Hestan Commercial Corporation
"
1
" TOE KICK
3
2
FLOOR
SINGLE
WALL
OVEN
3/4" thick plywood
WARMING
DRAWER
3/4" thick plywood
24"
27
9
5
3
8
1
"
4
1
"
4
MOUNTING STYLE A - STANDARD MOUNT WITH FLUSH FRONTS
CABINET
FACE FRAME
CABINET
FACE FRAME
" WOOD SPACER
1
4
"
1
4
25
1
"
7
16
28
CABINET
FACE FRAME
FLOOR
" TOE KICK
1
2
3
EN
WITH
3/4" thick plywood
BUILT-IN KIT, CONVECTION MICROWAVE (AKMWCK30)
3/4” TYP.
CABINET
FACE-FRAME
3
24"
CONVECTION
"
4
19
"
3
4
19
MICROWAVE
SPACER KIT, MICROWAVE (AKMWSK)
"
3
4
OVEN
WALL
SINGLE
1-1/4" wood spacer
3/4" thick plywood
BUILT-IN KIT, CONVECTION MICROWAVE (AKMWCK30)
" GAP
25
32
3
3
24"
3
"
8
27
"
8
27
WALL
SINGLE
25
"
4
OVEN
" GAP
32
WARMING
3/4" thick plywood
"
1
4
9
"
1
4
9
DRAWER
"
1
2
2
"
1
5
3/4" thick plywood
1
"
11
5
4
FLOOR
" TOE KICK
2
3
32
STANDARD
INSTALLATION
SPACER KIT
BUILT-IN KIT &
©2020 Hestan Commercial Corporation
3
EN
MOUNTING STYLE B - FLUSH (INSET) MOUNT
This mounting style has all the appliance doors flush to each other (wall oven + warming drawer
+ microwave) ANDAND the appliance doors
doors and face-frames to all be flush.
THE CABINET MUSTMUST BE BUILT TO A MINIMUM MINIMUM DEPTH OF 24-1/2”24-1/2” (not
including the face-frame, which is typically 3/4” thick). Follow the
installation instructions for each appliance and kit for location of electrical
supply / outlets.
The arrangement shown features the following products and kits:
Convection Microwave KMWC24
Microwave Built-In Kit AKMWCK30
Microwave Flush-Mount Kit AKMWFK
Single Wall Oven KSO30
Warming Drawer KWD30
This arrangement will leave different vertical gaps between each appliance door face due to
the ventilation requirements for each appliance. Please note the use of a 1-3/4” wood spacer
beneath the Microwave Built-In Kit, ANDAND a 25/32” wood spacer beneath the Warming Drawer.
These spacers are needed for proper vertical placement of each item.
AREARE
inset into the cabinetry - allowing the appliance
There are also several side mounting strips which must be located as shown and denoted with
an asterisk *.
DETAIL OF SIDE
MOUNTING STRIP
4
©2020 Hestan Commercial Corporation
Loading...