Hessaire MC37M User Manual

Manual for MC37/MFC3600

SETUP INSTRUCTIONS

Evaporative cooling
works on the principle of
heat absorption by
moisture evaporation.
Simply put, heat is
removed from the air as
water evaporates. You
feel this principle in
action when you step out
of a swimming pool or
shower and feel cool as
water evaporates from
the surface of your skin.
Your evaporative cooler
works on the same
principle. The fan pulls
hot outside air through
the wet cooling pads,
where the air is cooled by
evaporation and then
discharged from the
cooler

1

Hessaire Customer Service Centers

Hessaire Products, Inc.

11550 U.S. Highway 278 E.

Holly Pond, AL 35083

United States

Phone: [phone]

Fax: [phone]

Website: www.hessaire.com

Email: [e-mail]

Phoenix, AZ Location Contact:

Phone: [phone]

Do not return this item to the place of purchase unless instructed to
do so by Hessaire customer support

If you should find any missing parts, any loose, or dislodged items or have any
questions please call us first. We have parts and expert support that can help
you. We value your business and are here to help. We can ship any replacement
or warranty parts to you quickly so your Hessaire mobile cooler can keep you
cool.

STOP!!!

READ THIS FIRST

2

Getting started

Inspection:

After unpacking your evaporative cooler, carefully inspect for any damage that may have
occurred during transit. Inspect for loose, missing or damaged.

Contents:

Evaporative Cooler
(1)

Hardware Bag (1)

Casters (4)

Tools / Materials
Needed:

Drill with #2

Phillip’s bit

Or Phillip’s head

screwdriver

Use all precautions and
disconnect from power source
before performing any
maintenance.

Operating Instructions

Evaporative cooling works on the principle of heat absorption by moisture evaporation.
Simply put, heat is removed from the air as water evaporates. You feel this principle in
action when you step out of a swimming pool or shower and feel cool as water evaporates
from the surface of your skin.
Your evaporative cooler works on the same principle. The fan pulls hot outside air through
the wet cooling pads, where the air is cooled by evaporation and then discharged from the

cooler.

3

Hessaire Products Inc. Manufacturing Warranty

EVAPORATIVE COOLER

Each new cooler is warrantied to be free from defects in material or workmanship for one full year from the
date of original purchase. If a component is found to be defective in this one year period, it will be repaired
or replaced with a new or refurbished product at the option of the factory.
Should a warranty issue arise, please contact the dealer from whom the fan was purchased. A Return
Material Authorization (RMA) number is required for all returns.

What is not covered by the warranty:

1. Malfunctions resulting from misuse, negligence, alteration or lack of necessary maintenance.

2. Loss of time, inconvenience, use of product or other consequential damages due to defects.

3. Return transportation costs. All return transportation costs are the responsibility of the purchaser.

Damaged Shipments:
Hessaire is not responsible for damaged shipments or shortages resulting from carrier mishandling. Notify
your carrier’s office immediately to file a claim. Keep damaged goods and containers for inspection until
advised by the carrier as to disposal.

Returns:
All items must be returned with all original parts and packaging. Additional charges may apply for any missing
or damaged parts.
The customer must re-package and ship their item(s) back to the manufacturer at their own expense.
No freight cost/shipping cost will be re-funded to the customer.
The customer needs to provide us with the tracking number of the shipment.
Upon receipt of the product, including original parts and packaging, we may issue a full refund for the product
or may repair or replace the item with a new or refurbished product.
If our returns department finds that the item is not defective, you may be responsible for additional shipping
costs as well as a 10-30% re-stocking fee.

4

Section 3 Getting started

Key Operational Points:

1. Your cooler must be positioned in front of an open window or door if it is to operate effectively.

2. Always ensure that there is another open window or door through which the air can exhaust
from the room.

3. Ensure the filter is kept clean throughout the summer season.

4. At the end of each day run your cooler on FAN ONLY for 30 minutes to dry out the filter.

5. Prior to putting your cooler away for winter, always:

a. Drain the tank and wipe out clean.
b. Clean the filter
c. Reassemble and run on FAN ONLY for 30 minutes to dry out the filter.

Location! Location! Location!
Having completed assembly of your cooler, position the unit with its back to an open window or door.

This will allow fresh air to be drawn through the cooler and exhausted from the room. Constant air
change is essential and part of the fresh air benefit from evaporative air cooling.

Remember your cooler has been designed to operate even if it runs out of water. No damage will be
caused to the pump if cooler runs out of water.