Herz MILUX 3 F799 06 Quick Start Manual

HERZ 3 F799 06

HERZ Electronical room thermostat

MILUX

Data sheet for 3 F799 06, Issue 0715

Dimensions in mm

Characteristics

Wireless communication by radio signal to the receiver connected to the installation.
Weekly program by step of 1 hour.
9 Built-in programs and 4 User programs.
Program graphic display.
Room temperature and time display.
Comfort / Reduced / Anti-freeze temperatures.
Temporary temperature override.
Automatic or Manual operation.
Holiday function.
Keypads lock function (child safety).
Battery operated > 2 years.
Battery replacement without loss of the program memory (< 1minute).
Reset function.
ITCS function (optional): Intelligent Temperature Control System.

Page 1

HERZ 3 F799 06

Display

Display

1: Heating indicator
2: Temperature overridden
3: Holiday function activated
4: Operating mode menu
5: Batteries weak
6: Day of the week
7: Time
8: Current day graphic
program display and radio
transmission activity
9: If lit-up 11 display the
current room temperature
10: Cooling indicator
11: Room temperature or set
temperature

Keyboard

Validation key (OK)

plus key (+)
Navigation key right (-)

Navigation key left (◄)
Navigation key right (►)

Modes Discription

Use (◄) & (►) keys to change the mode in the Operating mode menu. For all operating modes

the receiver switch should be placed on AUTO position.
Set CLOCK Menu :

Use this menu to adjust the clock.
Use (+) & (-) to adjust the minutes.
Then press (Ok) key
Use (+) & (-) to adjust the hours.
Then press (Ok) key
Use (◄) & (►) to adjust the day.
Then press (Ok) key

COMFORT operating mode:

By pressing (+) or (-) keys the comfort temperature starts to blink and can be
adjusted.

The room temperature reappears after a few seconds.
The MILUX RF regulation will now follow indefinitely the comfort temperature.

AUTOMATIC operating mode:

Page 2

MILUX RF will follow automatically the program according to the actual time.
By pressing (+) or (-) key you can override the current set temperature until
the next change in the program.

The segment will lit up. Use (+) or (-) keys to adjust the temporary
required temperature.

At the next pro gram change the will disappear and the program
continues without any alteration.