Hertz ML Power 5 TECHNICAL SPECIFICATIONS

www.hertzaudiovideo.com

ML POWER 5

D-CLASS FIVE CHANNEL
AMPLIFIER

950 W

HRC BM (optional)

POWER SUPPLY

Power supply voltage: 11÷15 VDC

Idling current: 3 A

Idling current when off: 0.04 mA

Consumption @ 2Ω, 14.4 VDC (Max Musical Power): 50 A

AMPLIFIER STAGE

Distorsion - THD (100 Hz @ 4Ω): 0.08 %

Bandwidth A & B Ch (-3 dB): 5 ÷ 50k Hz

Bandwidth C Ch (-3 dB): 5 ÷ 500 Hz

S/N Ratio A & B Ch (A weighted @ 1 V): 100 dB

S/N Ratio C Ch (A weighted @ 1 V): 106 dB

Damping factor A & B Ch (100 Hz @ 4Ω): 50

Damping factor C Ch (100 Hz @ 4Ω): 90

Pre-In sensitivity: 0.2 ÷ 5 V RMS

Pre-In impedance: 15 kΩ

Speaker-In sensitivity: 0.8 ÷ 20 V RMS

Speaker-In impedance: 470 Ω

Load impedance:
5 Ch
3 Ch

CEA 2006-A RATINGS

RMS Power (4 Ω, ≤ 1 %
THD+N, 14.4 V):

S/N Ratio (ref. 1 W output):

OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%:

5 Ch
5 Ch
3 Ch
3 Ch

60 W x 4 Ch
+ 310 W x 1 Ch

60 W Channel: 80 dBA
310 W Channel: 84 dBA

70 W x 4 + 380 W x 1 (4Ω)
100 W x 4 + 550 W x 1 (2Ω)
200 W x 2 (4Ω) + 380 W x 1 (4Ω)
200 W x 2 (4Ω) + 550 W x 1 (2Ω)

4 x 2Ω + 1 x 2Ω
2 x 4Ω + 1 x 2Ω

1. ADC (ADVANCED D-CLASS TECHNOLOGY) ensures hi-end acoustic response

with unmatched power efficiency;

2. Thermally optimized double extruded heat sink featuring die-cast aluminium

ergonomic terminals;

3. 100 W x 4 + 550 W x 1 (2Ω) RMS power boasting hi-end quality;

4. Optional HRC BM for subwoofer volume control;

5. Highly flexible crossover system allows full range or Hi-pass 12 dB/Oct. filter

on A & B channels for front + rear configurations or Hi-Pass + Band-Pass
on A & B channels for multichannel configurations and Lo-Pass 24 dB/
Oct filter on C channel for optimal subwoofer control;

6. 3-Channel mode switch is provided to easily set up the amplifier for high power

front speaker system + subwoofer to achieve up to 200 W x 2 (4Ω) + 550 W x 1 (2 Ω).

7. ML Power IN with balanced Speaker In inputs for an increased noise rejection

and RCA In;

8. Operating status real time monitoring through 4 LEDs;

9. Full range Pre-out also available when using Speaker Level In inputs;

10. ART™ (Automatic Remote Turn On-Off).

OTHER FUNCTIONS

Remote In: 4 ÷ 15 VDC - 1 mA

ARTTM: Automatic Remote Turn-On/Off with Speaker-In

Fuse: 2 x 40 A

INPUTS / FILTERS

Inputs: Pre IN / Speaker IN

A Ch filters: Full / Hi-Pass / Band-Pass 40 ÷ 150 Hz (HI) 80 ÷ 3.3k Hz (LO) @

12 dB/Oct.

B Ch filters: Full / Hi-Pass 80 ÷ 3.3k Hz @ 12 dB/Oct.

C Ch filters: Lo-Pass 50 ÷ 500 Hz @ 24 dB/Oct.

Remote SUB volume: (-50 ÷ 6) dB

SIZE / WEIGHT

Max size (mm/inches): 170 x 349 x 46.70 / 6.69” x 13.74” x 1.84”

Weight (kg/lb): 3.09 / 6.81

Elettromedia - 62018 Potenza Picena (MC) Italy - T [phone] - F [phone] - www.elettromedia.it

All Specifications Subject to Change Without Notice_17.B

7