Unit Sizes
HP-N-300 to 2,500 (NEMA-US & Canada)300-2500-lbs/hr (136 - 1,134 kg/hr)
HP-I-100 to 1,000 (IEC-European)100-1,000 kg/hr (225 – 2,165 lb/hr)
Final Filter for Water Pump10-inch Ametek Filter; 10-Micron (Beta >5,000)
Motor – Direct Drive Constant SpeedVoltages
• 575v, 460v / 3ph / 60 Hz; NEMA
• 400v / 3ph / 50 Hz; IEC
• 330v / 3ph / 50 Hz; IEC
Speed
• 1725 – 1760 RPM; NEMA
• 1380 – 1430 RPM; IEC
High-Pressure Pump Motor1.0 to 5.0 HP (0.75 to 4.0 kw)
High-Pressure ManometerDual Scale 0-1450 psi (0-100 bar)
Pressure Relief ValveAdjustable Range 360-1450 psi (25-100 bar)
Water Supply Fill Valve and Safety Switches• High Temperature: Opens at 120ºF (50ºC)
• Low Pressure: Opens at 23-psi (1.6 bar)
HP Microprocessor Control• ON/OFF, Proportional, Proportional Plus Integral
• Capable of Setting Humidity and Limit Set Point
• Fault Indication
Input DevicesControl, High Limit, Air Proving
Humidity Sensors0-10 VDC or 4-20 mADC
Zone Control ValvesUp to (4) @ 24-volt AC
Zone Safety SwitchesHigh-Pressure Switch
Nozzle Orifices0.008 - 0.012-inches (0.2 - 0.3mm)
GaugesWater Inlet & High Pressure
Custom Designed Nozzle ArraysNominal 10.0 - 12.5-lbs/hr (4.55 - 5.67-kg/hr) per nozzle at 1000-psi (69-bar)
Assembly ConstructedFor Tap or DI/RO Water
Vapor Distribution SystemStainless Steel Pipes and Nozzles
Piping1/2" Diameter (12.7 mm) 316 Stainless Steel
Control Cabinet Construction16- and 18-gauge (1.52 and 1.21-mm) Powder-Coated Steel
Shipping WeightHP-N-300 125-lbs (57-kg); HP-N-2,500 250-lbs (113.4-kg)
Inlet Water Supply Connection3/4”, Hose Fitting (Adaptor Available)