HermanMiller Nelson Thin Edge Bed Installation Instructions Manual

HermanMiller

Nelson Thin Edge Bed (Twin, Full, Queen) Installation Instructions

For more information about our products and services or to see a list of dealers, please visit us at

www.hermanmiller.com/product-instructions or call 888 - 443 - 4357.

How to assemble your Nelson Thin Edge Bed.

Safety Instructions & Warning

• Read all instructions before using products

• Failure to fully tighten screws may cause injury

• Periodically check fasteners to ensure tightness

• The right is reserved to make changes at any time without notice

• Will require at least 2 people

• Extra bolts have been included

Parts Included

Wood Bed Frame (1) Top Rail (2)

Headboard (1)

H-Legs (2)

Steel Leg (2) Wood Leg (6)

Short Bolt (32)

Step 1 Step 2

Note: Will require at least 2 people.

Start with bed frame facing down.

Attach center steel or wood legs (except on Twin) using 4 Short Bolts per leg.

Medium Bolt (10)

4mm Allen

Wrench (1)

Short Bolt

HermanMiller Assembly Instructions1

Step 3

Attach outer legs using 4 Short Bolts per leg.

Step 4

Flip bed frame over so it is right side up being careful not to put weight on legs while flipping.

Step 5

Attach wooden top rails to both ends using Medium Bolts. Ensure medallion is facing outward.

Steel Leg Option

Wood Leg Option

Step 6

Attach headboard to bed frame at the end with medallion on top rail. Use 4 Short Bolts for each headboard support plate.

Medium Bolt

Branding Medallion

Short Bolt

HermanMiller Assembly Instructions2

+ 3 hidden pages

Specifications and Main Features