Herman Miller Flo Monitor Supports User Manual

Y

Our sustainability goals by the year 2020:

• Zero carbon footprint

• Zero landfill

• Zero hazardous waste generation

• Zero air emissions (VOCs)

• Zero process water use

• 100 percent renewable electrical energy use via renewable
energy credits and a power purchase agreement

• Company buildings constructed to a minimum LEED Silver certification

• 100 percent of sales from DfE approved products

Environmental Product Summary

™

Thrive

Portfolio

Flo™ Monitor Arm

Design Story: Taking monitor arms in a
new direction

The Flo monitor arm was designed by Peter Bosson of
Colebrook Bosson Saunders, a Herman Miller company.
Flo allows a flat screen to be used in either an upright
viewing position, at desktop level as a touch screen, or
anywhere in between. The constant objective throughout
the design process was to keep the shape, surfaces,
and joints as simple and pure as they could possibly
be. Through ingenious design, Flo offers maximum
performance with the minimum number of parts. The
exterior is of equally pure design with clean surfaces,
few visible parts, and a minimalist, streamlined
appearance.

Herman Miller’s Design Protocol

Our commitment to corporate sustainability naturally
includes minimizing the environmental impact of each
of our products. Our Design for Environment team (DfE)
applies environmentally sensitive design standards to
both new and existing Herman Miller products.

The DfE Design Protocol goes beyond regulatory
compliance to thoroughly evaluate new product
designs in four key areas:

• Material Chemistry and Safety of Inputs—
What chemicals are in the materials we specify, and
are they the safest available?

• Disassembly—Can we take products apart at the
end of their useful life, to recycle their materials?

• Recyclability—Do the materials contain recycled
content, and more importantly, can the materials be
recycled at the end of the product’s useful life?

• LCA—Have we optimized the product based on the
entire life cycle?

Material Content

Flo’s components are constructed from steel, aluminum,
plastic, and zinc.

STEEL 47%

ALUMINUM 36%

PLASTIC 10%

ZINC 7%

Flo is 99 percent recyclable at the end of its useful life.

Flo is comprised of 43-percent recycled materials. This
figure breaks down to 23-percent post-consumer and
20-percent pre-consumer recycled content.

PRE-CONSUMER
RECYCLED CONTENT 20%

POST-CONSUMER
RECYCLED CONTENT 23%

• Steel components contain approximately 13 percent
recycled content and are 100 percent recyclable.

• Aluminum components contain 95% recycled content
and are 100 percent recyclable.

• Most metal components have a powder-coat paint
finish that emits negligible volatile organic compounds
(VOCs).

• Returnable Packaging—Packaging materials for
Flo monitor arms include corrugated cardboard and
polyethylene stretch wrap. These materials are part of
a closed-loop recycling system, meaning they can be
recycled repeatedly.

® Y and Z are among the registered trademarks of Herman Miller, Inc.

TM

Thrive and Fl0 are among the trademarks of Herman Miller, Inc.

z 1

® GREENGUARD is a registered trademark of the GREENGUARD Environmental Institute.
© 2012 Herman Miller, Inc., Zeeland, Michigan

Y

Environmental Product Summary

™

Thrive

Portfolio

Flo™ Monitor Arm

– Whenever possible, shipments between

Manufacturing Process

• ISO—Flo monitor arms are manufactured in an ISO
9001 facility, which is currently working on ISO 14001
certification.

• Worker Health and Safety—Herman Miller strives to
meet or exceed OSHA standards.

Product Performance

• Backed by Herman Miller’s 12-year, 24/7 warranty.

Indoor Air Quality

Flo monitor arms are GREENGUARD® certified as a low­emitting product that meets current indoor air quality
standards.

Herman Miller and its suppliers include the use
of pallets and other returnable packaging to
minimize waste.

Corporate Environmental Policy

For more information on Herman Miller’s Corporate
Environmental Policy and other environmental
efforts, visit the “Environmental Advocacy” section of
HermanMiller.com.

Supplier Support

At Herman Miller, we are committed to working closely
with our suppliers to reduce our collective impact on
the environment. We not only encourage our suppliers
to minimize their operations’ environmental impacts,
but require they assist us in decreasing our facilities’
negative environmental effects, as well.

LEED

Flo monitor arms may contribute to LEED credits due
to their returnable/reusable packaging, durability,
pre-consumer recycled content, post-consumer content,
and GREENGUARD certification. Depending on location,
Flo also may contribute to a LEED Regional Materials
credit. Please refer to http://hermanmiller.com/ecoScorecard
or contact your Herman Miller representative for
detailed LEED information.

It’s important to note that no interior furnishings,
individually or collectively, can guarantee a
specific number of points for LEED certification.

Herman Miller complies with the Federal Trade commission’s Part 260

Guides for the Use of Environmental Marketing Claims.

® Y and Z are among the registered trademarks of Herman Miller, Inc.

TM

Thrive and Fl0 are among the trademarks of Herman Miller, Inc.

z 2

® GREENGUARD is a registered trademark of the GREENGUARD Environmental Institute.
© 2012 Herman Miller, Inc., Zeeland, Michigan