Herman Miller Equa 2 Chairs User Manual

HermanMiller
Equa 2® Chair
Seating that performs for you.
Seat Height: Paddle-shaped lever on right side
To raise:
Take your weight o chair, li lever up.
To lower:
Li lever up while seated.
At the proper height, your feet should rest flat on the floor.
Tilt Tension: Knob under seat on front of chair
To increase:
Turn knob to the le.
To decrease:
Turn knob to the right.
Tilt Lock: Paddle-shaped lever on the le side of tilt mechanism
Only available on some models.
To lock upright:
While seated upright, swing
paddle back.
To release:
Swing paddle forward.
Engage the tilt lock when you want to sit in an upright position.
Lumbar Depth: Pump pad and release button on front of right back support
Only available on split-pad models.
To increase:
While seated, li your weight o back
of chair, push pump pad in to inflate
lumbar support and achieve desired
level of support.
Set the tilt tension to control the resistance you feel when reclining.
HermanMiller Equa 2® Chair Adjustment Guide1
To decrease:
While seated, press release button to
deflate lumbar support and achieve
desired level of support.
Adjust the lumbar depth so that it comfortably supports the natural curve
of your spine.
Tilt Lock: Paddle-shaped lever on the le side of tilt mechanism
Only available on some models.
To lock upright:
While seated upright, swing
paddle back.
Arm Width: Back of each armpad
Only available on some models.
To adjust:
Grasp back end of armpad and slide it
toward you or away from you.
To release:
Swing paddle forward.
Engage the tilt lock when you want to sit in an upright position.
Lumbar Depth: Pump pad and release button on front of right back support
Only available on split-pad models.
To increase:
While seated, li your weight o back
of chair, push pump pad in to inflate
lumbar support and achieve desired
level of support.
To decrease:
While seated, press release button to
deflate lumbar support and achieve
desired level of support.
In the proper position, your elbows should be in line with your shoulders.
Footring Height: Footring at base of stool
Only available on stools.
To set:
Li and turn ring counterclockwise; set
at desired height.
To lock:
Turn ring clockwise.
At the proper height, your feet should rest flat on the footring.
Adjust the lumbar depth so that it comfortably supports the natural curve
of your spine.
Arm Angle: Front of each armpad
Only available on some models.
Adjust arm angle inward when using a keyboard; adjust arm angle outward
when using a mouse.
To adjust:
Grasp front end of armpad and pivot it
inward or outward.
Adjustment Guide2HermanMiller Equa 2® Chair
Loading...