
Ex pe ri ence
the comfort
of your
®
Eames chair

For use with your
Aluminum Group, Soft Pad
Group, or Executive Chair.
Adjustments may vary
according to chair model.
Manual Seat
Height Adjustment
To lower: Turn collar
counterclockwise while
holding chair arm
To raise: Turn collar clockwise while holding chair arm
Tilt Tension
To increase: Turn knob to
right while sitting in chair
To decrease: Turn knob to left
while sitting in chair
Pneumatic Seat
Height Adjustment
To lower: While seated,
lift lever up.
To raise: While taking your
weight off chair, lift lever up.
Tilt Lock *Pneumatic Chairs Only
Round knob on left side
To lock: Push knob in
To release: Pull knob out

User
information:
Installers
do not remove
Users: Retain This Information for Future Reference
Maintenance
A periodic inspection of chair components and fasteners should be made to ensure that the chair
is structurally intact and functioning properly. Damaged and broken parts should be replaced
and loose fasteners tightened. The support tube should be lubricated to ensure smooth operation
of the seat height adjustment (See your dealer for further information.). General clean ing in structions are found in the Care and Main te nance Manual available from your Herman Miller dealer.
For the location of the sales facility or dealer near you, visit www.hermanmiller.com
or call (800) 851 1196.
© 2009 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. 108616-F O.EA6201
® and Eames are among the registered trademarks of Herman Miller, Inc.