HermanMiller Eames Square, Eames Round, Eames Mobile Assembly Manual

HermanMiller

The Collection

Eames® Square, Round, and Mobile Table Assembly

How to assemble
your table.

For more information about our products and services or to see a list of dealers, please visit us at

hermanmiller.com or call [phone].

© 2013 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. 108445 - L.

® Y, Eames are among the registered trademarks of Herman Miller, Inc.

Tools Required

Parts Included

Top Surface

3/4” Hex Socket

Power Driver

OR

#3 Phillips Screwdriver

Ratchet Wrench Torque Wrench

Base Casting

(Universal base)

Top Casting

Contract Base

Tube

Lock Washer Screw (4)

Threaded Rod

Steel Bushing

(Universal base only)

Jam NutWasher

HermanMiller Eames® Tabl e Assembly Instructions1

Step 1

Step 2

1.1

Invert table top on a clean, Padded surface.

1.2

Align top casting on table top.

1.3

Insert (4) screws and tighten..

2.1

Thread jam nut completely onto one end of threaded rod untill jam nut will not turn.

2.2

Insert rod, jam nut down, and thread completely into top casting. Tighten jam nut against
top casting.

Step 3

3.1

Place tube over rod onto top casting.

Step 4

4.1

For universal base only-place steel bushing over rod into tube.

HermanMiller Eames® Tabl e Assembly Instructions2

Step 5

Step 6

5.1

Invert table base casting, casters/glides up, and plave over tube, making sure that base
casting legs are aligned approximately with top casting arms. ( for mobile table only, insert
casters into base).

6.1

Assemble washer and lock washer onto threaded rod. Torque jam nut to minimum of 40 ft-lbs.

Step 7

7. 1

Place table in upright position and return to service.

HermanMiller Eames® Tabl e Assembly Instructions3