Heritage A100 Owner's Manual
Owner’s Manual
Heritage A100 Integrated Amplifier
Livret d’utilisation
Heritage A100 Integrated Amplifier
Warnings and Precautions
CAUTION: To reduce the risk of electric shock, do not try to open the device. No user serviceable parts
inside. Refer servicing to qualified service personnel only.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
product.
This product is designed and manufactured to meet strict quality and safety standards. You should read all
the safety and operating instructions before using the product. Retain the manual for future reference and
adhere to all warnings in the manual or on the amplifier.
The presence of electricity near water can be dangerous. Do not use this product outdoors or near any
source of water for example next to a bathtub, washbowl, kitchen sink, in a wet basement or near a
swimming pool, etc. Take care that objects do not fall and liquids are not spilled into the enclosure through
any openings.
Do not place this product on a bed, sofa, rug or similar soft surface, or in an enclosed bookcase or cabinet,
where ventilation may be impeded. We recommend a minimum distance of 100 mm (4 inches) around all
sides and top of the product to provide adequate ventilation. Be sure that the ventilation holes below and
on the top cover of your product are neither covered nor obscured by any object or dust.
Locate the product away from naked flames or heat producing equipment such as radiators, stoves or other
appliances (including other electronic devices) that produce heat. The amplifier has been designed for use
in moderate climates.
You should never attempt to service the product beyond that described in this manual. All other servicing
should be referred to qualified service personnel. The only fuse used in this device is on the AC socket.
Always use exactly the same fuse as the one provided with your unit.
WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
If an abnormal smell or smoke is detected from the product, turn the power off at once and unplug the unit
from the wall outlet. Contact your dealer immediately.
The product should be referred to qualified service personnel when:
The power supply cord or plug is damaged
The product has been dropped or the enclosure has been damaged
Objects have fallen, or liquid has been spilled, into the product
The product has been exposed to moisture
The product does not appear to function normally or exhibits a marked change in performance
Warnings and Precautions
CAUTION: To reduce the risk of electric shock, do not try to open the device. No user serviceable parts
inside. Refer servicing to qualified service personnel only.
www.ybahifi.com
The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of un-insulated dangerous voltage within the product’s enclosure which may be of
sufficient magnitude to constitute a risk of electric shock.
Page 3
Heritage A100 Integrated Amplifier
We thank you for your purchase of our YBA Heritage product. We are confident that it will provide you with
many years of listening pleasure.
YBA Heritage products have been manufactured with the same pride and attention to detail as every other
product made since our creation in 1981. Your new product will give you the very best audio quality.
This user manual has been designed to give you all the information you need to install, connect, setup and
use your product. For your own safety and to ensure that no damage occurs, we strongly recommend that
you read the safety guidelines carefully before installation.
It is our recommendation that you use a rack or stand that is recommended for use with audio equipment.
If your equipment is on a portable rack it should be moved with great care, to avoid any accident.
It is always advisable to unplug the unit from the mains supply before cleaning. The casework should
normally only require a wipe with a soft, damp, lint-free cloth. Do not use paint thinners or other chemical
solvents for cleaning or furniture cleaning sprays or polishes as they can cause indelible white marks.
Only connect the product to a power supply of the type described in the operating instructions or as
marked on the rear panel. Be sure to check the noted voltage. Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or against them. Only use the power
supply cord supplied with your amplifier.
Unplug the power cord or switch it off if left unused for a long period of time.
This product has been designed to meet the IEC 60065 international electrical safety standard as well as CE
and RoHs regulations. The pictorial "crossed-bin" means the equipment must not be thrown with ordinary
wastes but must be collected for reuse, recycling and other forms of recovery. If no longer required it must
therefore be deposited in an appropriate collection point.
YBA is a registered trademark of YBA SAS and is restricted for use by YBA, its subsidiaries and authorized
agents. All other brands and product names quoted in this manual are registered trademarks and the
property of their respective owners.
Disclaimer: All the information contained in this manual was correct at the time of publication. However,
as our engineers are always updating and striving to improve our products, your product may have slightly
different appearance, performance, or modified functionality than presented in this manual.
www.ybahifi.com
Page 4
Heritage A100 Integrated Amplifier
YBA Warranty Policy Information
YBA warrants this product to be free from defects in materials and workmanship subject to the following:
The warranty period may vary from country to country and according to local regulations. Consult your
dealer or distributor to confirm the warranty duration in your country.
YBA will repair or replace this product (at YBA's sole option) or any defective parts in this product within
the terms of the warranty.
YBA warranty applies to the original purchaser only. Always ensure that you retain a valid proof of
purchase.
YBA shall not be liable for any incidental or consequential damages for breach of any express or implied
warranty in this product.
Except to the extent prohibited by law, this warranty is exclusive and in lieu of all other express and implied
warranties.
YBA warranty does not affect your statutory rights.
To obtain warranty service, please contact the YBA authorized dealer from whom you purchased this
product. Your dealer will deliver the product to the registered YBA service centre.
Shipping to the service centre is at your cost and your amplifier must be packed in either its original carton
or packaging affording an equal degree of protection.
Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is
within the warranty period, must be presented to obtain warranty service.
This warranty is invalid if
(a) the factory-applied serial number has been modified, altered or removed from this product
(b) this product was not purchased from a YBA authorized dealer
(c) the product shows any evidence of repair or attempt to repair not performed by a YBA authorized
service centre.
Maintenance and service or replacement of parts due to normal wear and tear
Faults caused by extreme situations (such as damage due to lightning, floods, moisture, fire...)
Problems arising from the misuse of the product or use of this product for non-domestic use
Faults caused by shock or the result of the product being dropped
Faults due to unauthorised opening or tampering with the unit
Damages due to repairs, modifications or cleaning by non-approved technicians or due to the use of nonYBA parts
Damage or defects caused by the use of inadequate packing during return to an authorized service centre
Damage to the outer chassis due to normal or abnormal wear and tear
Any complete or partial loss of data/files
Faults caused as a result of a short-circuit on the loudspeaker outputs
Warranty Procedure
Warranty Exclusions
Faults caused by other devices or accessories such as power cords, power filters, loudspeakers
www.ybahifi.com
Page 5
Loading...