Page 1
User Manual
Page 2
TABLE OF CONTENTS
1. BOX CONTENTS .......................................... 5
2. TECHNICAL SPECIFICATIONS ................... 6
3. FEATURES ................................................... 7
Overview ........................................................... 7
Decks ................................................................ 8
Mixing ............................................................. 18
Connectors ..................................................... 26
4. INSTALLATION ........................................... 27
Connections ................................................... 27
Downloading the software ........................... 29
DJUCED
.................................................. 29
Serato DJ Lite ............................................ 32
5. LIVENING UP YOUR MIX ........................... 34
Modes and pads ............................................ 34
The pads ................................................... 34
Hot Cue mode ........................................... 35
Stems mode .............................................. 36
Page 3
FX mode .................................................... 37
Sampler mode ........................................... 39
Scratching ...................................................... 40
Filters .............................................................. 41
6. MULTICHANNEL SOUND CARD ............... 42
Master output for speakers (output 1-2) ..... 42
Headphones output (output 3-4) ................. 43
7. COMPATIBILITY ......................................... 44
USB Audio / USB MIDI .................................. 44
ASIO and Windows® control panel ............ 44
Firmware update ............................................ 47
8. DEMO MODE .............................................. 48
9. FAQS ........................................................... 49
Page 4
s a
license for Serato DJ Lite, not a license for Serato DJ
Pro. If you install Serato DJ Pro instead of Serato DJ
Lite, Serato DJ Pro will work with your DJControl
Inpulse 200 MK2 for the duration of a trial period. At
want to continue
using Serato DJ Pro, you must purchase a Serato DJ
Hercules DJControl Inpulse 200 MK2 is a full-featured
controller designed for getting started DJing thanks to
dedicated features, video tutorials and integration with
the DJUCED
®
and Serato DJ Lite software.
Hercules DJControl Inpulse 200 MK2 include
the end of this trial period, if you
Pro license.
4
Page 5
1. Box contents
You can remove the protective film covering the VU
the Hercules DJControl Inpulse 200 MK2
controller. You can also leave the protective film in
− Hercules DJControl Inpulse 200 MK2
− Hercules, Serato and DJUCED
− Warranty flyer
stickers
meter on
place, as it does not affect the use of the VU meter.
5
Page 6
2. Technical specifications
System requirements:
− DJUCED
https://www.djuced.com/downloaddjuced/
− Serato DJ Lite:
https://serato.com/dj/lite/downloads?systemreq
:
uirements#system-requirements
Master output for speakers (output 1-2) via two RCA
connectors:
− Maximum output power = 5 dBU @ 1 kΩ
− THD+N @1 kHz < 0.01%
− Resolution = 24-bit
− Sample rate = 44.1 kHz
Headphones output (output 3-4) via one 3.5 mm stereo
mini-jack connector:
− Maximum output power = 5 dBU for 32Ω @ 1 kHz
− THD+N @1kHz < 0.017%
− Resolution = 24-bit
− Sample rate = 44.1 kHz
6
Page 7
3. Features
Overview
1. Transport buttons (Play, Cue, Sync, Shift)
2. Tempo fader (Pitch fader)
3. Loop controls (Loop)
4. Jog wheel
5. Pads and modes
6. Track selection controls (Browser, Load,
Assist./Prep.)
7. Mixing section (Gain, EQ, Filter)
8. Monitoring, volumes (Master and Headphones)
and Beatmatch Guide
9. Mixer (Crossfader, volume faders)
7
Page 8
Decks
1. Transport buttons
SHIFT: combined control. For example:
− SHIFT + ½: enables a loop by choosing the in point.
− SHIFT + LOOP: enables Vinyl (Scratch) mode.
SYNC: enables or disables automatic synchronization of
the BPM (beats per minute) values of two tracks.
− SHIFT + SYNC:
o In DJUCED
: makes the deck the master
synchronization (Master Sync) deck.
o In Serato DJ Lite: disables synchronization on
the deck.
8
Page 9
CUE: inserts a Cue point in the track to identify a
specific instant, or moves the deck playhead to the Cue
point’s position.
− Track paused: inserts a Cue point at the spot where
the track is stopped.
− Track playing: stops playback of the track and
moves the deck playhead to the Cue point.
o In DJUCED
, if no Cue point has been defined,
pressing CUE stops playback and places a Cue
point at the playhead’s location.
o In Serato DJ Lite, if no Cue point has been
defined, pressing CUE stops playback and
places a Cue point at the beginning of the track.
− CUE + PLAY: moves the playhead to the Cue point
and plays the track from that point.
− SHIFT + CUE:
o In DJUCED
: moves the playhead to the start
of the track, and stops playback.
o In Serato DJ Lite: moves the playhead to the
start of the track, and starts playback.
Play/Pause: plays or pauses the track.
− SHIFT + PLAY: in Serato DJ Lite, moves the
playhead to the Cue point and plays the track from
this marker.
9
Page 10
2. Tempo fader
Tempo fader: sets the track’s playback speed by
adjusting the number of BPM.
− Move up: slows down the track.
− Move down: speeds up the track.
− Tempo fader in the middle: the track’s original
speed. The green LED is lit up.
When the Beatmatch Guide function is enabled, the
TEMPO visual guides indicate whether you need to
move the tempo fader up or down, in order to slow down
or speed up the track. When the two red arrows are off,
the tempo on that deck is identical to the tempo on the
other deck.
For more information on the Beatmatch Guide function,
please read the
Beatmatch Guide section on page 22.
10
Page 11
In Serato DJ Lite and Serato DJ Pro, when Sync mode is
enabled, pressing SHIFT and moving the tempo fader at
the same time lets you move the tempo fader’s values
while maintaining the amplitude.
For example, with a tempo scale of ±8%, or 16%
amplitude, you can move the tempo fader’s values to
cover from 0% (maximum) to -16% (minimum), which
still results in 16% amplitude, with -8% in the center.
11
Page 12
3. Loop controls
LOOP: enables or disables playback of the loop.
½ / X2: divides by two or multiplies by two the size of the
active loop.
− SHIFT + ½ (LOOP IN): enables a loop by choosing
the in point.
− SHIFT + X2 (LOOP OUT): enables a loop by
choosing the out point.
When the loop is active:
− SHIFT + ½: turn the jog wheel to move the start of
the loop. To set this start of the loop, press
SHIFT + ½ again.
− SHIFT + X2: turn the jog wheel to move the end of
the loop. To set this end of the loop, press
SHIFT + X2 again.
To exit the loop, press LOOP.
12
Page 13
4. Jog wheel
Jog wheel: lets you move within the track, modify the
track’s playback, and scratch.
When the Beatmatch Guide function is enabled, the
BEAT ALIGN visual guides indicate the direction in
which you need to turn the ring (i.e. the edge) of the jog
wheel in order to align the beat grids of the two tracks.
When the two red arrows are off, the beat grids are
aligned.
For more information on the Beatmatch Guide function,
please read the
Beatmatch Guide section on page 22.
13
Page 14
The action carried out depends on three criteria:
Top
Ring
− Vinyl (Scratch) mode enabled or disabled;
− track playing or paused;
− the spot where you are touching the jog wheel (top
or ring).
To enable Vinyl (Scratch) mode, press SHIFT and LOOP
at the same time. To make sure that Vinyl mode is
enabled, press SHIFT. The LOOP button is lit up.
14
Page 15
Actions of the jog wheels with Serato DJ Lite and Serato
SHIFT
button
Scratching
Enabled
Play
Top
-
Enabled
Pause
Top
-
Disabled
Pause
Top - Speed up or slow down playback
Disabled
Play
Top or ring - Move slowly within the track
Disabled
Pause
Ring
-
Move quickly within the track
Press and
Press and
Press and
Press and
DJ Pro:
Vinyl mode Play/Pause Jog wheel
Enabled Play Top or ring
Enabled Pause Top or ring
Disabled Play Top or ring
Disabled Pause Top or ring
hold
hold
hold
hold
15
Page 16
Actions of the jog wheels with DJUCED:
SHIFT
button
Scratching
Enabled
Play
Top
-
Enabled
Pause
Top or ring - Speed up or slow down playback
Enabled
Play
Ring
-
Disabled
Play
Top or ring
-
Move quickly within the track
Disabled
Pause
Top
-
Move very quickly within the track
Press and
Press and
Press and
Vinyl mode Play/Pause Jog wheel
Enabled Play Ring
Enabled Pause Ring
Disabled Play Ring
hold
hold
hold
16
Page 17
5. Pads and modes
Mode buttons: let you enable up to four modes.
To enable a main mode, press HOT CUE or STEMS.
To enable a secondary mode (FX and SAMPLER),
simultaneously press SHIFT and HOT CUE or STEMS.
The mode button flashes.
For more information about the different modes with
DJUCED, Serato DJ Lite and Serato DJ Pro, please
read the
Modes and pads section on page 34.
Performance pads: a pad performs an action.
17
Page 18
Mixing
6. Track selection controls
LOAD*: loads the selected track on the destination deck.
In DJUCED, collapses or expands folders.
BROWSER encoder: lets you browse through your
music library by turning the encoder to the left (up) or to
the right (down).
Press the encoder to select folders and files.
In DJUCED
, press SHIFT and the encoder to return to
the root of your music library.
*The functionality is identical on decks 1 and 2.
18
Page 19
Illuminated ring:
− In DJUCED
, shows the energy level of the master
track for the tempo.
− In Serato DJ Lite, shows the rhythm. The light
flashes to the beat of the track.
ASSIST./PREP.:
− In DJUCED
, displays the panel suggesting the
best upcoming tracks for your mix.
Press ASSIST./PREP. and turn the encoder to
adjust the energy level of the tracks being
suggested.
− In Serato DJ Lite, adds the track currently being
played to the Prepare list.
19
Page 20
7. Mixing section
GAIN knob*: adjusts the gain (i.e. the volume level
before the volume fader).
2-band equalizer (EQ)*: controls the intensity of the EQ.
A knob is associated with each band: HIGH and LOW.
FILTER knob*: adjusts the frequency of the dual filter
(high-pass and low-pass).
*The functionality is identical on decks 1 and 2.
20
Page 21
8. Monitoring, volume and Beatmatch Guide
MASTER volume: adjusts the volume of the mix being
played on your speakers.
HEADPHONES volume: adjusts the volume of the
headphones output.
Monitoring: selects the sound source played on your
headphones.
− *: plays the sound from deck 1 or deck 2.
− MASTER: plays the sound of the mix being played
out loud for the audience.
*The functionality is identical on decks 1 and 2.
21
Page 22
defines one of the decks as the master
synchronization (Master Sync) deck, and the other as
red arrows only light up on the
slave deck, as this deck follows the tempo of the
not define a master
on both
BEATMATCH GUIDE: enables or disables the light
guides to adjust the tempo and align the beat grids of the
two tracks. There are four red arrows per deck.
DJUCED®
the slave deck. The
master synchronization deck.
Serato DJ Lite does
synchronization deck. The red arrows light up
decks.
22
Page 23
− TEMPO visual guides: if one of the two red arrows
located to the right of a tempo fader is lit up, this
means that the tempo (i.e. number of beats per
minute) of the track being played on this deck is
different than the tempo of the other deck.
The arrows indicate the direction in which you need
to move the tempo fader in order to adjust the
tempo of the track being played to match the tempo
on the other deck.
o Top arrow lit up: move the tempo fader up.
This will slow down the tempo.
o Bottom arrow lit up: move the tempo fader
down. This will speed up the tempo.
o Arrows not lit up: the deck’s tempo is
identical to the tempo of the other deck.
23
Page 24
− BEAT ALIGN visual guides: if one of the two red
arrows located below a jog wheel is lit up, this
means that the beats of the track being played on
this deck are not aligned with the beats of the other
deck.
The arrows indicate the direction in which you need
to turn the jog wheel in order to align the beats of
the track being played with the beats of the other
deck.
o Left arrow lit up: turn the jog wheel
clockwise. This speeds up the playback
speed.
o Right arrow lit up: turn the jog wheel
counterclockwise. This slows down the
playback speed.
o Arrows not lit up: the deck’s beats are
aligned with the beats of the other deck.
24
Page 25
9. Mixer
Volume fader*: adjusts the deck’s volume.
Crossfader: lets you make a transition between two
tracks by increasing the volume of one of the decks,
while decreasing the volume of the other deck.
− Crossfader all the way to the left: you only hear the
track on deck 1.
− Crossfader all the way to the right: you only hear the
track on deck 2.
− Crossfader in the middle: you hear the tracks on
both decks 1 and 2 at the same time.
*The functionality is identical on decks 1 and 2.
25
Page 26
Connectors
10. Master output for speakers (output 1-2)
11. USB-B 2.0 cable
12. Headphones output (output 3-4)
Master output for speakers (output 1-2): lets you
connect active speakers.
Format: 2 x RCA (Cinch)
USB-B 2.0 cable: lets you connect the controller to a
computer.
Headphones output (output 3-4): lets you connect
headphones in order to monitor tracks.
Format: 3.5 mm stereo mini-jack connector
26
Page 27
4. Installation
Connections
1. Connect the DJControl Inpulse 200 MK2 controller
to your computer with the USB cable.
2. Connect the inputs on your active speakers to the
speaker outputs on DJControl Inpulse 200 MK2
(2 RCA).
3. Connect your headphones to the 3.5 mm stereo
mini-jack connector at the front of DJControl Inpulse
200 MK2.
27
Page 28
An LED illumination sequence, called Vegas Mode,
starts up each time you connect the device to your
er. Vegas Mode takes place in four phases,
allowing it to light up all of the LEDs and display
different possible colors for the multicolored backlit
comput
energy ring.
28
Page 29
Downloading the software
DJUCED
1. Please visit: https://www.djuced.com/hercules.
®
2. Download and install DJUCED
3. Please visit:
https://support.hercules.com/product/djcontrolin
.
pulse200mk2/
.
4. Download and install the driver pack for your
computer’s operating system.
o macOS®: HDJC Series Mac
o Windows
Windows
®
requires that you install the drivers in
®
: HDJC Series PC
order to use DJControl Inpulse 200 MK2 in ASIO
mode, which reduces the latency compared to
WASAPI mode and is generally more stable.
The drivers also let you test your DJControl Inpulse
200 MK2 and verify the firmware version in both
Windows® and macOS®.
5. Launch the DJUCED
indicating that your product has been successfully
detected and is ready to use.
software. A window appears,
29
Page 30
When you run the software for the first time,
guides you through connecting your
headphones and active speakers (or lets you use the
speakers built into your computer, if you don’t have
screen
DJUCED®
external active speakers). Follow the on-
information step by step before getting started.
Audio settings:
In DJUCED®, to modify the sound card settings, click the
gear wheel icon in the upper right-hand part of the
screen. The Settings menu is displayed.
Select the Audio tab to choose the sound card, and
assign the outputs for headphones and speakers.
The standard setup for Windows
®
is as follows:
− Audio device: DJControl Inpulse 200 MK2 ASIO
(ASIO)
− Output:
o Master: Outputs 1&2
o Headphones: Outputs 3&4
30
Page 31
The standard setup for macOS® is as follows:
Follow the Hercules DJ Academy tutorials integrated
, which you can access by clicking the
− Audio device: DJControl Inpulse 200 MK2
− Output:
o Master: Outputs 1&2
o Headphones: Outputs 3&4
into DJUCED
icon.
The tutorials are also available
YouTube channel.
31
here, on the DJUCED
Page 32
Serato DJ Lite
1. Please visit: https://serato.com/dj/lite/downloads.
2. Download and install Serato DJ Lite.
3. Please visit:
https://support.hercules.com/product/djcontrolin
pulse200mk2/
.
4. Download and install the driver pack for your
computer’s operating system.
o macOS
o Windows
Windows
®
requires that you install the drivers in
®
: HDJC Series Mac
®
: HDJC Series PC
order to use DJControl Inpulse 200 MK2 in ASIO
mode, which reduces the latency compared to
WASAPI mode and is generally more stable.
The drivers also let you test your DJControl Inpulse
200 MK2 and verify the firmware version in both
Windows® and macOS®.
32
Page 33
Hercules DJControl Inpulse 200 MK2 includes a
license for Serato DJ Lite, not a license for Serato DJ
Pro. If you install Serato DJ Pro instead of Serato DJ
Lite, Serato DJ Pro will work with your DJControl
duration of a trial period. At
the end of this trial period, if you want to continue
using Serato DJ Pro, you must purchase a Serato DJ
Inpulse 200 MK2 for the
Pro license.
33
Page 34
5. Livening up your mix
Modes
DJUCED
/ Serato DJ Lite / Serato DJ Pro**
1
Hot Cue
2
Stems
3
FX
4
Sampler
There are different ways to liven up your mix.
Modes and pads
The pads
Pads 1 to 4 carry out the actions corresponding to the
mode currently enabled.
The modes enabled on the pads are the following:
**Serato DJ Pro license not included.
34
Page 35
Hot Cue mode
A Hot Cue point is a marker (like a bookmark) that you
can place in a track to easily locate this moment in the
track again, and instantly return to it afterwards.
Four Hot Cue points can be set per track.
1. To access Hot Cue mode, press HOT CUE. The
HOT CUE button’s light stays lit up.
2. To set a Hot Cue point, press a pad.
3. To play the track from a Hot Cue point, press the
corresponding pad.
4. To remove a Hot Cue point, press SHIFT and the
pad at the same time.
35
Page 36
Stems mode
Deck 1 / Deck 2
Stem
Pad 1
Vocals
Pad 2
Melody
Pad 3
Bass
Pad 4
Drums
Stems mode lets you separate a track into four different
parts (vocals and instruments), called “stems”.
1. To access Stems mode, press STEMS. The
STEMS button’s light stays lit up.
2. Pads 1 to 4 are each associated with a stem. To
stop playing a stem, press the corresponding pad.
The pad’s light turns off.
3. To resume playing the stem, press the
corresponding pad. The pad lights up.
Stems:
36
Page 37
FX mode
FX mode lets you control the effects on the pads. An
effect is sometimes a filter or a combination of filters
applied to a track to modify its sound (echo, reverb…).
In DJUCED®, the pads control the effects rack’s effects.
To display the effects rack, click .
In Serato DJ Lite and Serato DJ Pro, the pads control
four effects that cannot be modified. These effects are
not in the Serato DJ effects racks, and consequently you
do not see the action of the pads in the software.
37
Page 38
1. To access FX mode, press SHIFT and HOT CUE at
Deck 1 /
Displays/hides the
the same time. The HOT CUE button flashes.
2. To carry out an action, press a pad.
Possible actions:
Deck 2
DJUCED
Pad 1 Effect 1 of the rack Echo
Pad 2 Effect 2 of the rack Flanger
Pad 3 Effect 3 of the rack Reverb
Pad 4
effects rack
Serato DJ Lite
Repeater
38
Page 39
Sampler mode
A sample is a short sound played over the track that is
currently playing: it can be played either once or in
repetition.
In DJUCED, pads 1 to 4 let you play the four samples
found on the first line of the multilayer sampler.
To display the multilayer sampler, select 2Decks
Horizontal + 2 Samplers in the drop-down menu in the
upper left-hand part of the screen in DJUCED.
In Serato DJ Lite, pads 1 to 4 let you play a sample.
To display the samples panel, click in Serato DJ Lite.
1. To access Sampler mode, press SHIFT and STEMS
at the same time. The STEMS button flashes.
2. To play a sample, press a pad.
3. To stop playing a sample, press SHIFT and the
corresponding pad at the same time.
39
Page 40
Scratching
Scratching consists of producing a sound effect from a
track, by turning the jog wheel.
1. To enable the scratch function, press SHIFT and
LOOP at the same time.
In order to ensure that the scratch function (Vinyl
mode) is enabled, press SHIFT. The LOOP button
is lit up.
2. Place your index finger on top of the jog wheel and
make small, quick movements to the right and to the
left.
You can repeat this scratch multiple times to create
a rhythm.
40
Page 41
Filters
Adjustment of the track’s filter lets you attenuate certain
frequencies.
− Attenuate the high frequencies (known as a low-
pass filter or high-cut filter): turn the filter knob
(FILTER) to the left.
− Attenuate the low frequencies (known as a high-
pass filter or low-cut filter): turn the filter knob
(FILTER) to the right.
41
Page 42
6. Multichannel sound card
The product includes a built-in multichannel sound card,
allowing you to play your mix on speakers for the
audience (Master output for speakers) and monitor the
next track that you’re preparing on your headphones
(headphones output).
Master output for speakers (output 1-2)
Your active speakers should be connected to the Master
output for speakers located at the back of your product.
42
Page 43
Headphones output (output 3-4)
Your headphones should be connected to the
headphones output located at the front of your
product.
By default, each time your product is connected, the
headphones output is assigned to output 3-4 so that it
can work with all DJing software available on the market
®
— including DJUCED
and Serato DJ Lite, in particular.
However, if you wish to use your product’s headphones
output to listen to music on your computer using iTunes,
for example, you must route output 1-2 to the
headphones output. To do this, press the MASTER
button.
43
Page 44
7. Compatibility
USB Audio / USB MIDI
This product is Plug & Play and can work without drivers
on any PC or Mac, as it complies with the USB Audio
and USB MIDI standards.
ASIO and Windows® control panel
To use the DJControl Inpulse 200 MK2 controller with
Serato DJ Lite, you must install the ASIO drivers. The
ASIO drivers are available here:
https://support.hercules.com/product/djcontrolinpul
se200mk2/
If you are using DJUCED, you can also download the
ASIO drivers in order to take advantage of lower latency
on your PC.
.
The ASIO drivers come with a control panel accessible
in the taskbar on PC, or in the C:\Program
Files\DJHERCULESMIX\Audio\DJ Console Series\
directory. This panel lets you adjust the ASIO buffer size,
and thus the latency.
44
Page 45
To adjust the ASIO settings:
− Set the ASIO buffer size to 4 or 8 ms.
®
− Start up your software (e.g.: DJUCED
) and select
the DJControl Inpulse 200 Mk2 ASIO driver:
Once the software begins using the ASIO driver, the
ASIO settings can no longer be modified in the control
panel. This is perfectly normal, and indicates that the
ASIO driver is in use.
45
Page 46
Use your software and listen for any artifacts, audio
glitches (clicks, pops) and latency problems: should any
of these issues arise, you will need to adjust the buffer
sizes accordingly.
Close your software and adjust your ASIO buffer by one
value at a time:
− Reduce the buffer size to reduce latency.
− Increase the buffer size if you notice glitches or
artifacts in the audio.
You will need to repeat this procedure until you find the
optimal buffer size for your system.
The drivers are available here:
https://support.hercules.com/product/djcontrolinpul
se200mk2/
.
46
Page 47
Firmware update
Your product features an automatic firmware update
mode. This requires installing the Hercules drivers and
following the on-screen instructions. The firmware
update will occur automatically.
The drivers are available here:
https://support.hercules.com/product/djcontrolinpul
se200mk2/
The control panel also allows you to access this
information and display the driver versions installed on
your computer in the ABOUT tab. Have this information
ready if you need to contact Hercules’ technical support.
.
47
Page 48
8. Demo mode
This mode is available when you connect your product to
a USB power supply, and is used in-store, in particular.
In this case, the product is not operational but is in demo
mode: a demo sequence lighting up the controller’s
different lights keeps repeating itself.
48
Page 49
9. FAQs
1. No sound is coming out of my
headphones.
Make sure that you have connected your headphones at
the front of the product, as your product is equipped with
a multichannel sound card preconfigured to work with
®
DJUCED
and Serato DJ Lite.
By default, the two monitoring buttons are enabled when
the software is first launched. You can then select either
deck that you want to listen to on your headphones, or
use the MASTER button to listen to the results of your
mix.
49
Page 50
Tip
Ring
Sleeve
Tip
Ring
Sleeve
Ring
2. The sound on my headphones is
distorted.
Make sure that your headphones feature a TRS
connector (standard headphones) and not a TRRS
connector (headphones + microphone).
TRRS connectors are not compatible with the DJControl
Inpulse 200 MK2 controller.
50
Page 51
3. No sound is coming out of my
speakers.
Make sure that you have connected your speakers to the
RCA connectors at the back of the product, as your
product is equipped with a multichannel sound card
preconfigured to work with DJUCED
Lite.
In order to test (without using DJ software) whether the
audio interface of the DJControl Inpulse 200 MK2
controller is producing sound, you can display the DJ
controller’s control panel. Click the ABOUT tab, and then
click the speaker icon. The icon turns green when sound
is being played.
®
and Serato DJ
51
Page 52
4. No sound is coming out of my
laptop computer speakers.
Your product is equipped with a preconfigured
multichannel sound card. If you want to use the
speakers built into your laptop computer:
− In DJUCED
SEND MASTER TO COMPUTER SPEAKERS
option.
®
, access the settings and tick the
− In Serato DJ Lite, access the settings, open the
Audio tab and tick the Use Laptop Speakers option.
52
Page 53
5. No sound is coming out of my
headphones, or my laptop computer
speakers.
By default, the sound comes from the Master output for
speakers, and the headphones output. It is therefore
normal that no sound is coming out of your laptop
computer.
If you want to use the speakers built into your laptop
computer:
− In DJUCED
SEND MASTER TO COMPUTER SPEAKERS
option. You must connect your headphones to the
DJControl Inpulse 200 MK2 controller.
®
, access the settings and tick the
53
Page 54
− In Serato DJ Lite, access the settings, open the
Audio tab and tick the Use Laptop Speakers option.
You must connect your headphones to the
DJControl Inpulse 200 MK2 controller.
In order to test (without using DJ software) whether the
audio interface of the DJControl Inpulse 200 MK2
controller is producing sound, you can display the DJ
controller’s control panel. Click the ABOUT tab, and then
click the speaker icon. The icon turns green when sound
is being played.
54
Page 55
6. I can’t connect my multimedia
speakers to my DJControl Inpulse
200 MK2.
If your speakers’ connectors differ from the connectors
on DJControl Inpulse 200 MK2, you can use a dual RCA
to 3.5 mm mini-jack adapter (not included) or any other
adapter format corresponding to your speakers.
You can also connect your speakers to the headphones
output and route output 1-2 to output 3-4 by pressing the
MASTER button.
7. Is the DJControl Inpulse 200 MK2
controller compatible with an iPad
or iPhone?
No, the DJControl Inpulse 200 MK2 controller is not
compatible with an iPad or iPhone. It only works with a
PC or Mac.
55
Page 56
TECHNICAL SUPPORT
https://support.hercules.com
56
Page 57
Trademarks
Intel® and Intel Core™ are trademarks or registered trademarks of Intel
Corporation.
Microsoft® Windows® 10/11 is a registered trademark or trademark of
Microsoft Corporation in the U.S. and/or in other countries.
Mac® and macOS® are trademarks of Apple Inc., registered in the U.S.
and other countries.
Serato, Serato DJ Lite and Serato DJ Pro are registered trademarks of
Serato Audio Research Limited.
The DJUCED brand and DJUCED’s graphic elements are the
property of Guillemot Corporation.
ASIO is a trademark of Steinberg Media Technologies GmbH.
All other trademarks and trade names are hereby acknowledged in this
document and are the property of their respective owners. Illustrations
not binding. Contents, designs and specifications in this document are
subject to change without notice and may vary from one country to
another.
57
Page 58
Copyright
No part of this manual may be reproduced, summarized, transmitted,
transcribed, stored in a retrieval system, or translated into any language
or computer language, in any form or by any means, electronic,
mechanical, magnetic, manual, via photocopying, recording, or other,
without the express written consent of Guillemot Corporation S.A.
58
Page 59
DJUCED® and Serato DJ Lite End
User License Agreement
Please read the License Agreement displayed during installation of
DJUCED
®
and Serato DJ Lite carefully.
59
Loading...