Hercules 15605, 15625 User Manual
SAFETY DATA SHEET
1. Identification
Product identifier Hercules Real Tuff
Other means of identification
SDS number
Synonyms
Recommended use
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
Company Name
Address
Telephone
E-mail
Transport Emergency
Emergency First Aid
Contact person
2. Hazard(s) identification
Physical hazards
7324E
Part Numbers: 15605, 15615, 15620, 15625, 15630, 15632, 15635, 15640
Multipurpose thread sealant
None known.
HCC Holdings, Inc. an Oatey Affiliate
4700 West 160th Street
Cleveland, OH 44135
216-267-7100
info@oatey.com
Chemtrec 1-800-424-9300 (Outside the US 1-703-527-3887)
1-877-740-5015
MSDS Coordinator
Not classified.
Health hazards
OSHA defined hazards
Label elements
Hazard symbol
Signal word
Hazard statement
Precautionary statement
Prevention
Response
Storage
Disposal
Hazard(s) not otherwise
classified (HNOC)
Supplemental information
Not applicable.
Not classified.
Not classified.
None.
None.
The mixture does not meet the criteria for classification.
Observe good industrial hygiene practices.
Wash hands after handling.
Store away from incompatible materials.
Dispose of waste and residues in accordance with local authority requirements.
None known.
3. Composition/information on ingredients
Mixtures
refined heavy parrafinic
CAS number %Chemical name
64741-88-4 15-40Petroleum distillates, solvent
Mixture 15-40Talc
9002-84-0 10-30Polyfluoroethylene
13463-67-7 5-10Titanium dioxide
68187-84-8 1-5Castor Oil, Oxidized
8002-43-5 1-5SOYBEAN LECITHIN
Hercules Real Tuff SDS US
921101 Version #: 02 Revision date: 10-Dec ember-2014 Issue date: 30-July-2014
1 / 7
112945-52-5 1-5Silica, amorphous, fumed
*Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret.
4. First-aid measures
Inhalation
Skin contact
Eye contact
Ingestion
Most important
symptoms/effects, acute and
delayed
Indication of immediate
medical attention and special
treatment needed
General information
Move to fresh air. Call a physician if symptoms develop or persist.
Wash off with soap and water. Get medical attention if irritation develops and persists.
Rinse with water. Get medical attention if irritation develops and persists.
Rinse mouth. Get medical attention if symptoms occur.
Direct contact with eyes may cause temporary irritation.
Treat symptomatically.
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves.
5. Fire-fighting measures
Suitable extinguishing media
Unsuitable extinguishing
media
Specific hazards arising from
the chemical
Special protective equipment
and precautions for firefighters
Fire fighting
equipment/instructions
Specific methods
General fire hazards
Water spray. Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Do not use water jet as an extinguisher, as this will spread the fire.
During fire, gases hazardous to health may be formed.
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Use water spray to cool unopened containers.
Use standard firefighting procedures and consider the hazards of other involved materials.
No unusual fire or explosion hazards noted.
6. Accidental release measures
Personal precautions,
protective equipment and
emergency procedures
Methods and materials for
containment and cleaning up
Environmental precautions
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Keep out of
low areas. Do not touch damaged containers or spilled material unless wearing appropriate
protective clothing. For personal protection, see section 8 of the SDS.
This product is miscible in water. Prevent entry into waterways, sewer, basements or confined
areas. Following product recovery, flush area with water. For waste disposal, see section 13 of the
SDS.
Avoid discharge into drains, water courses or onto the ground.
7. Handling and storage
Precautions for safe handling
Conditions for safe storage,
including any incompatibilities
Avoid prolonged exposure. Observe good industrial hygiene practices.
Store in original tightly closed container. Store away from incompatible materials (see Section 10
of the SDS).
8. Exposure controls/personal protection
Occupational exposure limits
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
Components
solvent refined heavy
parrafinic (CAS 64741-88-4)
13463-67-7)
Type
PEL 5 mg/m3 Mist.Petroleum distillates,
PEL 15 mg/m3 Total dust.Titanium dioxide (CAS
Value
2000 mg/m3
500 ppm
Form
Hercules Real Tuff SDS US
921101 Version #: 02 Revision date: 10-Dec ember-2014 Issue date: 30-July-2014
2 / 7
US. OSHA Table Z-3 (29 CFR 1910.1000)
TypeComponents
TWA 0.8 mg/m3Silica, amorphous, fumed
(CAS 112945-52-5)
US. ACGIH Threshold Limit Values
Components
solvent refined heavy
parrafinic (CAS 64741-88-4)
13463-67-7)
US. NIOSH: Pocket Guide to Chemical Hazards
Components
solvent refined heavy
parrafinic (CAS 64741-88-4)
(CAS 112945-52-5)
Biological limit values
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Eye/face protection
Skin protection
Hand protection
Other
Respiratory protection
Thermal hazards
General hygiene
considerations
No biological exposure limits noted for the ingredient(s).
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level.
Wear safety glasses with side shields (or goggles).
Wear protective gloves.
Wear appropriate chemical resistant clothing.
In case of insufficient ventilation, wear suitable respiratory equipment.
Wear appropriate thermal protective clothing, when necessary.
Always observe good personal hygiene measures, such as washing after handling the material
and before eating, drinking, and/or smoking. Routinely wash work clothing and protective
equipment to remove contaminants.
Type
TWA 5 mg/m3 Inhalable fraction.Petroleum distillates,
TWA 10 mg/m3Titanium dioxide (CAS
Type
STEL 10 mg/m3 Mist.Petroleum distillates,
TWA 5 mg/m3 Mist.
TWA 6 mg/m3Silica, amorphous, fumed
Value
20 mppcf
Value
Value
Form
Form
9. Physical and chemical properties
Appearance
Physical state
Form
Color
Odor
Odor threshold
pH
Melting point/freezing point
Initial boiling point and boiling
range
Flash point
Evaporation rate
Flammability (solid, gas)
Hercules Real Tuff SDS US
921101 Version #: 02 Revision date: 10-Dec ember-2014 Issue date: 30-July-2014
Paste.
Solid.
Solid.
White.
Odorless
Not available.
Not available.
Not available.
Not available.
Not available.
Not available.
Not available.
3 / 7
Loading...