Safety Instructions
1. Read and keep the instructions, even you can operate it.
2. Follow the instructions, and operate it properly.
3. Clean the kits in dry cloth. Wet will damage the inner part.
4. Protect the power cord from being walked or damaged.
5. Use the provided AC power adapter when under guarantee or consult your local electrician
for replacement of the power adapter if overdue service.
6. Keep this set indoor use only.
7. Do not install this set near water, radiators, heat registers, stoves or other amplifiers.
8. The baby monitor is totally safe and has no direct contact with the baby.
Main Features
1. Two-way talk, clear calls between Parent Unit and Baby Unit;
2. Room live temperature monitoring;
3. Built-in 6 lullabies (Play in both Parent unit and Baby unit, or Play in Baby unit only)
4. Night vision automatically: 3-5 meters distance
5. Portable 2.4" Color Liquid Crystal Display
6. Eco mode to energy saving (Normal working status: 4 hours, max 72 hours)
7. Taking photos, can save 68 photos, can be covered automatically.
8. 20s into ECO mode, waked up the alarm function by audio from Baby unit.
9. Nicety UI interface
Structure
Package Includes
1 x 3.5" Parent Unit . 1 x Baby Unit .
2 x AC Power adapters. 1 x User manual
Operation Instructions
First, for the Baby Unit, use the original terminal AC power adapter to connect it.
Secondly, plug the AC power adapter of the Baby Unit in normal electric supply.
Thirdly, after the connections, the Baby Unit is working, user can operate the Parent Unit, and
hold on the On/Off button for 2-3s on the Parent Unit’s panel, then the 2.4” screen of Parent Unit
will immediately receive the signals and display the images. (If low power or non power for the
Parent Unit, please do use the power adapter to charge this first)
Notice: The Parent Unit can work without plugging in after your full charge, the Baby Unit
requires to be plugged in at all times.
Keys Instructions
1. On/Off button: Turn on the monitor; or Turn off the monitor; or Working status,
press it down, it will be into the power saving Eco mode; or in Eco mode status, press it, it will
wake up, and the screen will show the image or menu;
2. Menu button: Press it, it will go into the Menu Mode; or Return button: Press it,
into image display status.
3. Brightness adjustment button; or Up button in Menu Mode .
4. Snapshot button: Press it, the camera will take a snapshot, and store it automatically;
or Left button in Menu Mode .
5. Call button:Hold on the call Baby unit; but in Menu Mode it is 'OK'.
6. Lullabies playing button; or Right button in Menu Mode .
7. Voice adjustment button; or Down button in Menu Mode .
How to operate in Menu Mode
Figure(1)
1. Pairing icon: pair the Parent Unit and Baby Unit under Menu Mode,please note that the
factory has been paired before use as default.
2 “ √ ” Pairing icon voice dection alarm is activated from Baby unit, the Parent unit
will be in didi sound; it will show “ X ” close the alarm
3 Eco mode icon: select this icon under Menu Mode, press Talk button, it will add
“ √ ” symbol on this Eco mode icon, then press Menu button, after 20s, the screen will be
black into Eco mode; then press the Talk button again, it will show“ X ” symbol to shut down
the Eco mode
4 Digital album icon: select this icon under Menu Mode, when full, will be covered
automatically.
5 Microphone sensitivity icon: select this icon under Menu Mode, then press Talk button,
it will be “ X ” close the wake-up; or “L” low sensitivity; or “H” high sensitivity.
6 6 Music pre-programmed lullabies icon
Figure(2)
Showing the strength of the wireless signal in real time.
Showing baby room’s temperature monitoring data.
Enter power saving mode after 20 seconds automatically.
Showing battery volume, or it will beat when charging status.
SPECIFICATIONS
Items Camera LCD
Lens size／Screen size
Effective pixels 640x480(VGA) 480x320
Frequency
Taking photos 68 photos
Power supply／battery
Transmission Range 328-984ft 328-984ft
Operation temperature
1/4 CMOS 2.4” TFT-LCD
2410.875-2471.625 MHz 2410.875-2471.625 MHz
Type-C 5v Type-C 5v lithium polyme/3.7V 950mAH
-10℃―60℃ -10℃―60℃
Trouble Shooting
Promble Solution
No pictures from a
camera
No sound from the
camera when operating
the Parent Unit
Flashing image on the
screen
How to pair the Baby
unit and Parent Unit if
no coding
1.Check all the connection of Parent Unit and Baby Unit, ensure
these are properly connected.
2, Make sure parent unit and baby unit are working separately.
3. Check they are paired.
4. Check the distance it is effective between the two separate kits.
1. Make sure the mirrcophone is open or not.
2. Check the battery of the Parent Unit is slow or enough.
3. Check the distance from the Baby Unit to the baby.
4. The Parent Unit may be out of reach of the Baby Unit.
Keep the Baby Unit away from the warning area. Much interference
are around them.
1. Keep it off for the Baby unit, select the Pairing icon under the
menu mode, press talk button
2. Connect the power to the Baby unit, pair the two until the Parent
unit get the signal from the camera, and display the live
pictures.
Warning
1.Keep the cord out of child’s reach.
2.The baby unit detects the sound with a range of 2-3meters from a child.
3.This product is NOT intended to replace proper supervision of child. You must check
your child’s activity, as this product will not alert parents to silent activities of a child.
4.Never us extension cable or cord with AC power adapter. Only use the AC power
adapter provided.
5.Place the best angle and location for the camera to your baby.
Remarks
Dear customers or consumers, if you are experiencing difficulties in using our products,
please contact the relevant personnel for the after-sales service. We will be very
enthusiastic to response it for you.
FCCCaution
Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothe
followingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)
thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay
causeundesiredoperation.
AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser'sauthoritytooperatetheequipment.
Note: ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClass
Bdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedto
providereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.
Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnot
installedandusedinaccordancewiththeinstructions,maycauseharmfulinterference
toradiocommunications.However,thereisnoguaranteethatinterferencewillnot
occurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferenceto
radioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoff
andon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthe
followingmeasures:
-Reorientorrelocatethereceivingantenna.
-Increasetheseparationbetweentheequipmentandreceiver.
-Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe
receiverisconnected.
-Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforan
uncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwith
minimumdistance20cmbetweentheradiator&yourbody.
Loading...