Henny Penny MMP-941 Installation Manual

Multipurpose Holding Cabinet

Henny Penny

Model MMP-941

OPERATOR’S MANUAL

Model MMP-941

LIMITED WARRANTY FOR HENNY PENNY EQUIPMENT

Subject to the following conditions, Henny Penny Corporation makes the following limited warranties to the original

purchaser only for Henny Penny appliances and replacement parts:

NEW EQUIPMENT:
in material or workmanship within two (2) years from date of original installation, will be repaired or replaced
without charge F.O.B. factory, Eaton, Ohio, or F.O.B. authorized distributor. Baskets will be repaired or replaced
for ninety (90) days from date of original installation. Lamps and fuses are not covered under this Limited
Warranty. To validate this warranty, the registration card for the appliance must be mailed to Henny Penny within
ten (10) days after installation.

FILTER SYSTEM
other unapproved filters is not

REPLACEMENT PARTS:
in material or workmanship within ninety (90) days from date of original installation will be repaired or replaced
without charge F.O.B. factory, Eaton, Ohio, or F.O.B. authorized distributor.

The warranty for new equipment covers the repair or replacement of the defective part and includes labor charges and

maximum mileage charges of 200 miles round trip for a period of one (1) year from the date of original installation.

The warranty for replacement parts covers only the repair or replacement of the defective part and does not include any
labor charges for the removal and installation of any parts, travel, or other expenses incidental to the repair or replacement of
a part.

EXTENDED FRYPOT WARRANTY:
workmanship issues for a period of up to seven (7) years from date of manufacture. This warranty shall not cover any frypot
that fails due to any misuse or abuse, such as heating of the frypot without shortening.

0 TO 3 YEARS:
will be replaced at no charge for parts, labor, or freight. Henny Penny will either install a new frypot at no
cost or provide a new or reconditioned replacement fryer at no cost.

3 TO 7 YEARS:
will be replaced at no charge for the frypot only. Any freight charges and labor costs to install the new
frypot as well as the cost of any other parts replaced, such as insulation, thermal sensors, high limits,
fittings, and hardware, will be the responsibility of the owner.

Any claim must be presented to either Henny Penny or the distributor from whom the appliance was purchased. No
allowance will be granted for repairs made by anyone else without Henny Penny’s written consent. If damage occurs during
shipping, notify the sender at once so that a claim may be filed.

THE ABOVE LIMITED WARRANTY SETS FORTH THE SOLE REMEDY AGAINST HENNY PENNY FOR ANY
BREACH OF WARRANTY OR OTHER TERM. BUYER AGREES THAT NO OTHER REMEDY (INCLUDING
CLAIMS FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES) SHALL BE AVAILABLE.

The above limited warranty does not apply (a) to damage resulting from accident, alteration, misuse, or abuse; (b) if the
equipment’s serial number is removed or defaced; or (c) for lamps and fuses. THE ABOVE LIMITED WARRANTY IS
EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY
AND FITNESS, AND ALL OTHER WARRANTIES ARE EXCLUDED. HENNY PENNY NEITHER ASSUMES NOR
AUTHORIZES ANY PERSON TO ASSUME FOR IT ANY OTHER OBLIGATION OR LIABILITY.

Any part of a new appliance, except baskets, lamps, and fuses, which proves to be defective

: Failure of any parts within a fryer filter system caused by the use of the non-OEM filters or

covered under this Limited Warranty.

Any appliance replacement part, except lamps and fuses, which proves to be defective

Henny Penny will replace any frypot that fails due to manufacturing or

During this time, any frypot that fails due to manufacturing or workmanship issues

During this time, any frypot that fails due to manufacturing or workmanship issues

Revised 01/01/07

FM05-038-D

Revised 07-02-07

Model MMP-941

TABLE OF CONTENTS

Section Page

Section 1. INTRODUCTION ............................................................................................... 1-1

1-1. Multipurpose Holding Cabinet ................................................................... 1-1

1-2. Features....................................................................................................... 1-1

1-3. Proper Care ................................................................................................. 1-1

1-4. Assistance ................................................................................................... 1-1

1-5. Safety .......................................................................................................... 1-2

Section 2. INSTALLATION ................................................................................................ 2-1

2-1. Introduction................................................................................................. 2-1

2-2. Unpacking................................................................................................... 2-1

2-3. Electrical Requirements.............................................................................. 2-2

2-4. Cabinet Dimensions.................................................................................... 2-2

Section 3. OPERATION....................................................................................................... 3-1

3-1. Introduction................................................................................................. 3-1

3-2. Operating Controls and Components.......................................................... 3-1

3-3. Start-up........................................................................................................ 3-3

3-4. Operating Suggestions with Product........................................................... 3-3

3-5. 4 Timer Operation and Programming......................................................... 3-3

3-6. 6 Timer Operation and Programming......................................................... 3-6

3-7. Cleaning...................................................................................................... 3-8

3-8. Error Codes................................................................................................. 3-9

GLOSSARY ........................................................................................................ G-1

Distributor Lists - Domestic and International

707 i

Model MMP-941

SECTION 1. INTRODUCTION

1-1. MULTIPURPOSE
HOLDING CABINET is a basic unit of food equipment designed to hold

hot foods at proper temperature in commercial food
operations. This cabinet will keep hot foods humid
while maintaining temperature.

1-2. FEATURES

1-3. PROPER CARE As in any unit of food servicing equipment, the

multipurpose holding cabinet does require care and
maintenance. Requirements for the maintenance and
cleaning are contained in this manual and must become a
regular part of the operation of the unit at all times.

1-4. ASSISTANCE Should you require outside assistance, just call your local
Henny Penny distributor in your area, call Henny
Penny Corp. at 1-800-417-8405 toll free or
1-937-456-8405, or visit Henny Penny online at
www.hennypenny.com.

1-1 905

The Henny Penny multipurpose holding cabinet

• Electronic heat and time control for each drawer

• Easy access to all components for servicing

• High temperature gasket used for drawer seals

• Positive drawer closure to ensure good seal of

compartment

• Easy to clean front drip edge for collection of excess

moisture around drawers

• Solid stainless steel construction

• Vented drawer fronts allow venting of excess

humidity

Model MMP-941

1-5. SAFETY The only way to ensure safe operation of the Henny

Penny multipurpose holding cabinet is to fully understand
the proper installation, operation and maintenance
procedures. The instructions in this manual have been
prepared to aid you in learning the proper procedures.
Where information is of particular importance or is safety
related, the words NOTICE, CAUTION, or WARNING
are used. Their usage is described below:

SAFETY ALERT SYMBOL is used with DANGER,
WARNING, or CAUTION which indicates a personal
injury type hazard.

NOTICE is used to highlight especially important
information.

CAUTION used without the safety alert symbol
indicates a potentially hazardous situation
which, if not avoided, may result in property damage.

CAUTION used with the safety alert symbol
indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.

WARNING indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.

705 1-2