Refers to safety regulations and requires safety measures that protect the operator or
other persons from injury or danger to life.
Caution!
Emphasizes what must be done or avoided so that the unit or other property is not
damaged.
Notice:
A notice gives recommendations for better handling of the unit during operation or
adjustment as well as for service activities.
1.2 For Your Safety
For safe and successful operation of the unit, read these instructions completely. If
the instructions are not observed, the manufacturer can assume no responsibility.
Do not expose the connecting cable to heat, oil, or sharp edges.
Make sure the Unit stands stable and secure.
Use only original equipment replacement parts.
Always disconnect the power supply before servicing the unit.
Observe general safety regulations for the handling of chemicals such as Loctite®
adhesives and sealants. Observe the manufacturer’s instructions as stated in the Safety
Data Sheet.
While under warranty, the unit may be repaired only by an authorized Loctite®
service representative.
3
1.3 Unpacking and Inspection
Carefully unpack the Teroson® Telescopic Multi-Press Dispenser #142241 and
examine the items contained in the carton. Inspect the unit for any damage that
might have occurred in transit. If such damage has occurred, notify the carrier
immediately. Claims for damage must be made by the consignee to the carrier
and should be reported to the manufacturer.
1.4 Items supplied
1 Teroson® Telescopic Multi-Press Dispenser
1 Equipment Manual
1 Quick Disconnect Air Line Connector
1 Tool for piercing aluminum cartridges
1 Blue nozzle cap for applying spray able seam sealant
1 Black nozzle cap for clamping 300ml cartridges for multifunctional use
Container Types
This dispenser is suitable to dispense 300 ml cartridges.
1.5 Features
The material flow and spray air can be regulated independently for fine
control.
Telescopic cylinder provides hermetic separation of the adhesive and air.
Capable of dispensing both spray and bead patterns.
2 stage discharge valve.
Quick Disconnect Air Fitting.
1.6 Usage
It is used to dispense Terostat-9320 SF and other Silane Modified
Polymer (SMP) products.
4
2 Description
The Teroson® 142241 Telescopic Multi-Press Dispenser is a hand held pneumatic
applicator designed for spraying sealants and adhesives packaged in 300 ml cartridges.
The air spray distributes the adhesive equally on the surface that is being coated. The
dispenser is capable of either spray, bead, or ribbon patterns to produce seam and joint
seals as well as surface coatings.
3 Technical Data
Input Pressure : 145psi max
Internal Working Pressure : 0 to 100 psi for metal cartridges
Compressed Air : Free of dirt, dry, lightly oiled
Compressed air connection : 1/4-19 BSPP
Dimensions
: 0 to 60 psi for plastic cartridges
Length: 15.3 in (389 mm)
Diameter: 2.8 in (70 mm)
Height: 9.5 in (242 mm)
Weight: 2.2 lbs. (1 Kg)
Environmental Temperature: 0
o
to 140o F.
4 Installation
Before using the equipment for the first time check it carefully for signs of external damage.
If any shipping damage is found DO NOT USE THE EQUIPMENT – return it to your
supplier immediately.
Air Line
The enclosed plug connector fits standard German air line connections. Screw
connector into internal thread of pistol handle. When using other connection systems,
use appropriate plug connectors.
5
We recommend the use of air line hoses made of plastic or rubber with a nominal width
of 6 mm and a minimum operating pressure of 10 bar (140 p.s.i.) at +600 C.
Loading...
+ 9 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.