Henkel K-50 User Manual

www.keenovens.com

Henkel, Inc.

P.O. Box 1322

Hammond, LA

70404

[phone]

Henkel, Inc.

P.O. Box 1322 * Hammond, Louisiana * 70404 * [phone]

www.keenovens.com

Model K-50 Portable Oven

Installation Instructions & Repair Parts List

One Year Limited Warranty

Henkel, Inc. warrants its products against defects in material and workmanship. Henkel, Inc. will either
repair or replace without charge any properly installed product which fails under normal operating
conditions within one year from date of installation, provided it is returned to our factory,
transportation prepaid, and our inspection determined it to be defective under the terms of this
warranty. The warranty covers only equipment manufactured by Henkel, Inc., and does not extend to
transportation, installation, or replacement charges at the buyers’ facility; nor does it apply to any other
equipment of another manufacturer used in conjunctions with Henkel, Inc. equipment. No other
warranty, expressed or implies exists beyond that included in this statement.

Recommended Spare Parts

When it is critical to have continuous operation of this unit;

we suggest having the following spare parts on hand:

Heating Element

Power Cord

Thermostat

General Information

The K-50 Keen oven is a portable unit designed for use in the shop or field. This oven will
protect electrodes from moisture during transfer from a holding oven to the job. It is light and easy to
carry. The square shape gives this oven greater stability vertically and horizontally. It is made of steel,
treated, then painted with a chemical-resistant blue paint. All Keen ovens are Mercury free.

Keen Ovens

Model K-50

Specifications

Electrode Capacity 50lbs. 18" rods
Volts (Specifiy) 120V or 240V AC /DC
Current Draw 1.25 am ps
Watts 150W
Thermostat Factory Preset/Field Adjustable
Tem perature Preset 275ºF : Range 100ºF-300ºF
Insulation 1"
Interior Dimensions 6" X 6 X 19" H
Net Weight 20lbs.
Shipping Weight 21lbs.
Shipping Dimensions 10.5" X 9" X 22.75"

Safety Precautions

Read all instructions completely before attempting to operate this unit.

*** SAVE THESE SAFETY INSTRUCTIONS ***

To reduce the risk of electrical shock, fire, or personal injury follow the guidelines below:

• Before connecting unit to a power source, be sure the voltage supplied is the same as that specified on the name plate

of the unit.

• Check outlet to ensure proper grounding of the electrical cable. Have a licensed electrician check the A/C power

outlet if you are not sure.

• Use this unit for its intended purpose as described by literature.

• Make sure power cord is located so that it will not be stepped on, tripped over, or otherwise subjected to stress of heat,

oil, or sharp edges. Do not close doors on the cord.

• To reduce the risk of damage to the electric plug and cord, disconnect by plug rather than by the cord.

• Do not use this unit if cord or plug is in poor condition. If it has been exposed to weather or immersed in water, have a

qualified serviceman inspect and replace parts as necessary.

• WARNING! NEVER HANDLE PLUG, CORD, OR UNIT WITH WET HANDS OR WHILE STANDING IN

WATER.

• Use special care when moving heavily loaded units.

• Do not store combustible material on or around the unit.