Henkel K-15R User Manual

Henkel, Inc.

P.O. Box 1322

Hammond, LA

70404

[phone]

www.keenovens.com

Henkel, Inc.

P.O. Box 1322 * Hammond, Louisiana * 70404 * [phone]

www.keenovens.com

Model K-15R

Installation Instructions & Repair Parts List

One Year Limited Warranty

Henkel, Inc. warrants its products against defects in material and workmanship. Henkel,
Inc. will either repair or replace without charge any properly installed product which fails
under normal operating conditions within one year from date of installation, provided it is
returned to our factory, transportation prepaid, and our inspection determined it to be
defective under the terms of this warranty. The warranty covers only equipment
manufactured by Henkel, Inc., and does not extend to transportation, installation, or
replacement charges at the buyers’ facility; nor does it apply to any other equipment of
another manufacturer used in conjunctions with Henkel, Inc. equipment. No other
warranty, expressed or implied exists beyond that included in this statement.

Recommended Spare Parts

When it is critical to have continuous operation of this unit;

we suggest having the following spare parts on hand:

Heating Element, Power Cord, Thermostat

General Information

The K-15R is a portable oven designed for use in the shop or field. These ovens will protect
electrodes from moisture during transfer from a holding oven to the job. They are light and easy to carry.
The square shape gives these ovens greater stability vertically and horizontally. They are made of steel,
treated, then painted with a chemical-resistant blue paint. All Keen ovens are Mercury free. The addition
of an electrical receptical to the model K-15 portable rod oven allows workers to operate 120V power
tools without the necessity of using a separate extension cord. Also, welders working in close proximity
to each other can daisy chain, or plug one oven into another, again eliminating the need for multiple
extension cords. Because the portable rod oven draws very little current, operating power tools or
operating ovens in series should not overload electrical currents.

Using the model K-15R oven saves on the expense of extension cords and the labor to place,
pick-up, and store the cords.

Keen Ovens

pping

Model K-15R

Specifications

Electrode Capacity 15lbs. 18" rods
Volts 120V AC/DC
Watts 100W
Temperature 100ºF - 300ºF
Insulation 1"
Interior Dimensions 3.3" D X 19" H
Receptical Output 120V - 12AMP
Net Weight 13lbs.
Shipping Weight 15lbs.
Shi

Dimensions 10.5" X 9" X 22.75"

Safety Precautions

Read all instructions completely before attempting to operate this unit.

*** SAVE THESE SAFETY INSTRUCTIONS ***

To reduce the risk of electrical shock, fire, or personal injury follow the guidelines below:

• Before connecting unit to a power source, be sure the voltage supplied is the same as that specified on

the name plate of the unit.

• Check outlet to ensure proper grounding of the electrical cable. Have a licensed electrician check the

A/C power outlet if you are not sure.

• Use this unit for its intended purpose as described by literature.

• Make sure power cord is located so that it will not be stepped on, tripped over, or otherwise subjected

to stress of heat, oil, or sharp edges. Do not close doors on the cord.

• To reduce the risk of damage to the electric plug and cord, disconnect by plug rather than by the cord.

• Do not use this unit if cord or plug is in poor condition. If it has been exposed to weather or immersed

in water, have a qualified serviceman inspect and replace parts as necessary.

• WARNING! NEVER HANDLE PLUG, CORD, OR UNIT WITH WET HANDS OR WHILE

STANDING IN WATER.