Hello Kitty KT3055BP User Manual

PROFESS IONAL HAIR DRYER

USER MANUAL
KT3055BP

WARNING:

This is an electric appliance –

not a toy! To avoid risk of fire,

burns, personal injury and electric shock it should not be played
with or placed w here small children can re ach it. Not appropriate
for use by children 12 years of age and younger.

1

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety
precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BE FO RE USI NG .
KEEP AWAY FROM WATER.

DANGER:

To reduce the risk of electric shock:

1. Do not reach for an appliance that has fallen into
water. Unplug it immediately.

2. Do not use while bathing or in the shower.

3. Do not place or drop into water or other liquid.

4. Do not place or store this appliance where it can fall
or be pulled into a tub or sink.

5. Always unplug this appliance from the electrical
outlet immediately after using.

6. Unplug this appliance before cleaning it.

WARNING:

To reduce the risk of burns, electrocution, fire or injury to persons:

1. This appliance is for household use only.

2. An appliance should never be left unattended when it’s plugged in.

3. Close supervision is necessary when this appliance is used by, on, or near children or
invalids.

4. Use this appliance only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.

5. Keep the power cord away from heated surfaces. Do not wrap the cord around the
appliance.

6. Never operate this appliance if it has a damaged power cord or plug, if it is not working
properly, if it has been dropped or damaged, or if it has been dropped into water.

7. Never drop or insert any object into any of the appliance’s openings.

8. Do not use outdoors or operate where aerosol (spray) products are being used, or
where oxygen is being administered.

9. Always store this appliance and cord in a moisture-free area.

10. Do not plug or unplug this appliance when your hands are wet.

KEEP AWAY FROM CHILDREN. FOR ADULT USE ONLY.

SAVE THESE INSTRUCTIONS

2

ALCI SAFETY PLUG

This hair dryer is provided with an Appliance Leakage Circuit Interrupter (ALCI) safety device
built into the AC power plug. This device is designed to make the unit inoperable under some
abnormal conditions, such as accidental immersion in water. The ALCI safety device is
equipped with a test button so that its operation can be checked.

CHECK ALCI EVERY TIME YOU USE YOUR HAIR DRYER

TO CHECK

After plugging the ALCI Safety Plug into an AC outlet,

1. press the RESET (red) button on the ALCI device;

2. press the TEST (yellow) button. The RESET button will pop out. This verifies that the
safety device is operating properly;

3. press the RESET button to reactivate your ALCI safety device.

4. Your hair dryer is now ready for use.

CAUTION

• This hair dryer may automatically trip when unplugged. If so, the ALCI must be reset
after it is plugged in. If the dryer doesn’t reset after following the above testing procedure,
call our customer service hotline at 1-800-777-5331.

• Should the ALCI safety device trip (i.e., the reset button pops out) during use, this could
indicate a malfunction in the hair dryer. Remove the plug from the AC outlet and allow
dryer to cool. Press the RESET button. Should the hair dryer fail to reset, call our
customer service hotline at 1-800-777-5331. Never operate this appliance if it has been
dropped in water.

• The ALCI Safety Plug is fitted with polarized prongs (one blade is wider than the other).
As a safely feature, this plug will fit in a polarized household outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician, DO NOT attempt to defeat this safety feature.

• The appliance is designed to work on ordinary household power only, 125V~ 60 Hz.

AUTOMATIC OVERHEAT SHUTOFF

This appliance is also equipped with an automatic overheat shutoff which will cycle off when
the unit becomes overheated and resumes normal operation when sufficiently cooled down.
If the unit cycles off, unplug the AC Power Cord for 5 minutes or more before restarting.