Hello Kitty KT2052 User Manual

Sleeping Kitty Alarm Clock Radio

USER MANUAL
KT2052

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Caution marking is located at the bottom of apparatus.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions

2. Keep these instructions

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider that the other. A grounding-type pl ug
has two blades and a third grounding prong. The wider blade or the thir d prong is
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.

Caution: Electrically Operated Product – Please

use care when plugging into AC outlet

10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments / accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for lon g periods of
time.

13. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is

- 1 -

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.

14. This appliance shall not be exposed to dripping or splashing water and that no
object filled with liquids such as vases shall be placed on the apparatus.
Use only with the cart, stand, trip pot bracket or table specified by 15.
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
Do not overload wall outlet. Use only power source as indicated. 16.

17. Use replacement parts as specified by the manufacturer.

ed by th18. The product may be mounted to a wall only if recommend e manufacturer.

19. Upon completion of any service or repairs to this product, ask the service technician
to perform safety checks.

COMPLIANCE WITH FCC REGULATIONS

This device co ect to the following

cluding interference that may

This and found to comply with the limits for a Class B Digital

or relocate the receiving antenna.

ent and receiver.

m which the receiver is

- ealer or an experienced radio technician for he lp.

A

mplies with Part 15 of the FCC Rules. Operation is subj
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, in

cause undesired operation.

equipment has been tested
Device, pursuant to Part 15 of the FCC Rul es. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

- Reorient

- Increase the separation between the equipm

- Connect the equipment into an outlet on a circuit different fro

connected.

Consult the d

W RNING

Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

- 1 -

WELCOME

- 2 -

We have taken great care to make sure that your Clock Radio was in perfect working
order when it left our factory. It has been designed to give you many years of enjoyment
and trouble free operation. Read this manual before operating this unit to become
familiar with its features and obtain the performance that will bring you continued
enjoyment for many years.

For future reference, record the serial number in the space provided.

Model Number: KT2052
Serial Number: ______________________________

IMPORTANT NOTES

Avoid installing the unit in locations described below:

• Places exposed to direct sunlight or close to heat radiating appliances such as
electric heaters.

• Dusty, humid or moist places.

• Places subject to constant vibration.

POWER SOURCE

This radio is designed to operate on 120V~ 60 Hz AC power only. Do not attempt to
operate the radio on any other power source. You could cause damage to the radio that
is not covered by your warranty.

The radio should be connected to an AC outlet that is always 'live'. Do not connect the
radio to an outlet that is controlled by a wall switch. When the power to the radio is
interrupted, the Sure Alarm battery back up system takes over to maintain the time and
alarm settings. To maximize the life of the back up battery, keep the radio connected to
a 'live' AC outlet at all times.

This unit has a polarized AC plug with one wide blade and one narrow blade. This plug
will only fit into a matching polarized AC outlet. This is a safety feature to reduce the
possibility of electric shock. If this plug will not fit in your AC outlet, you probably have an
outdated non-polarized outlet. You should have your out-dated outlet changed by a
qualified, licensed electrician. Do not file the w ide blade on the plug , or use an adap tor to

- 2 -

- 3 -