HellermannTyton MK9BLADEKIT Specification Sheet

Specification Sheet
Part Number:
MK9BLADEKIT
MK9 Service Kit. Includes replacement blade, screw for nosepiece, and instruction card
110-00220
Type
MK9BLADEKIT
Features & Benefits
– An easy to read display speeds adjustment and verification. – Thumb tab on
larger tension knob for easy adjustment. – On the Mark 7, a larger knob sets
the three variable tension levels (minimum, intermediate, and standard). The
smaller knob fine tunes within the tension range. – The larger knob on the
Mark 9 sets to two variable tension levels (standard and heavy). The smaller
knob fine tunes the tension setting. – Housings are manufactured from a high
impact, glass reinforced nylon. – A double wall linkage adds more strength. –
Tough chromium steel components ensure longevity. – MK7 & MK9 are military
specified. – Single and dual lock-out features available for tensioning ranges. –
Cable tie tension and cut-off tools reduce operator fatigue and speed
assembly. – The Mark 7 features a one inch stroke, while the Mark 9 has a 5/8
inch stroke. Both reduce trigger cycles required to install cable ties. –
Ergonomic design on both tools ideally fit the operator’s hand. Removable
padded hand grips further reduce impact to the hand. – Low friction bearing
mechanisms reduce hand effort and provide a smooth stroke. – Extremely
light, the Mark 7 weighs only 10 ounces. The Mark 9 weighs just 13 ounces. –
Quick tension adjustability for flush cut-off.
Quantity Per
bag
Product Description
Specifically developed for maximum ergonomic and performance values, the
Mark 7 and Mark 9 series tools combine reduced hand effort and durable
components to ensure efficient assembly and a longer life cycle. The Mark 7
tools are used with T18 through T50 series HellermannTyton cable ties. The
Mark 9 tools can be used with nearly every HellermannTyton cable tie. Able to
accommodate ties to .530" in width, the Mark 9 is used with HellermannTyton's
T18* series cable ties to the heavy duty ties, including the T250 series and
EL-TY. High tension versions of both the Mark 9 and Mark 7 tools (MK9HT and
MK7HT) offer the same design features as their standard counterparts but with
higher cut-off tension capabilities. The Mark 9 and Mark 7 high tension tools
both offer a 5/8" stroke.
Short Description
MK9 Service Kit. Includes replacement blade, screw for nosepiece, and
instruction card
Global Part Name
MK9BLADEKIT
Technical Description
Service Kit for the MK9 Tool includes replacement blade, screw for nose piece,
and instructional card.
Tension Setting Tools
Adjustable
ROHS Complaint
Yes
Package Quantity(Imperial)
1
Package Quantity (Metric)
1
Customs Number
8205599000
Content Unit(BMEcat)
pcs.
© 2019 HellermannTyton. All Rights Reserved.
Contact Us
RoHS/WEEE Compliance
Disclaimer
Terms and Conditions
Loading...