Specification Sheet
Part Number:
MDUS3-B1SP
S3 Splice Enclosure with Cable Storage Basket, 4x SE Splice Trays, Wall Mounted, Gray, 1/pkg
Article Number
857-01482
Type
MDU-S3-BWX
Color
Gray RAL 7035 (7035)
Features & Benefits
•
UV stable enclosure with IP54 (NEMA 3S) sealing and IK08 impact rating for
long-term outdoor performance. •
Multiple input/output points to run to multiple
locations from one box. •
Supports cabled, blown, pushed and pulled fiber
deployments to accommodate any construction style.
Quantity Per
EA
Product Description
The S3 enclosure is designed for wall-mounted distribution, configured with the
HellermannTyton 250µm IR Management System. The management system
accommodates four splice trays giving a maximum of 48 heat shrink splices
and 3 PLC splitters. The position of the fiber management system allows easy
access for the routing of fiber to the trays. Fiber slot retaining blocks guide the
fiber elements on to the IR system; the foam pad on the retainer is partially cut
through to accommodate a range of fiber counts. Designed with seven
input/output ports; three across the bottom, two on top and one on each side;
each port will accommodate a 20 mm cable gland.
Short Description
S3 Splice Enclosure with Cable Storage Basket, 4x SE Splice Trays, Wall
Mounted, Gray, 1/pkg
Global Part Name
MDU-S3-BWX
Technical Description
The S3 enclosure is configured with the HellermannTyton 250µm IR
Management System. The management system accommodates 4 SE-IR trays
giving a maximum of 48 3A fibre splices and 3 PLC splitters. The position of
the fibre management system allows for easy access for the routing of fibre on
to the trays. The trays and fibre optic routing modules are white which makes it
easy to see the colour of the fibre elements as they are routed through the
positive fibre management system. Fibre slot retaining blocks guide the fibre
elements on to the IR system; the foam pad on the retainer is partially cut
through to accommodate a range of fibre counts. All IR system cover plates
are coloured blue identifying them as removable parts allowing access to the
fibre, the fibre retaining block and tray retaining clips are coloured red to aid in
identification if they are dropped. A loop storage basket is fitted for
management of fibre loops and is located on left hand side of the enclsoure.
The enclosure is 340 x 247 x 76mm (H x W x D) and manufactured in light
grey (RAL 7035), UV stable ABS (Acrylonitrile Butadiene Styrene) and has an
IP54, IK08 and V0 rating. Designed with 7 input/output ports, 3 across the
bottom, 2 on the top and 1 on each side, each port will accommodate a 20mm
cable gland. A 100 x 25mm inset position on the front cover allows for a
customer logo to be moulded in to the enclosure.
Port Count
7
Variant
Indoor/Outdoor FTTx Enclosures
Width W (Imperial)
9.72
Width W (Metric)
247
Loading...