Specification Sheet
Part Number:
CCE-1111SX-B
Customer Connection Enclosure, 1x SC Adapter SM, Black, 1/pkg
Article Number
857-01436
Type
CCE-A11121SX1/BK
Color
Black (BK)
Features & Benefits
•
Black, UV stable enclosure with IP54 (NEMA 3S) sealing rating for long-term
outdoor performance. •
Internal positive fiber management and fiber retention
clips maintain a minimum 30 mm bend radius throughout, ensuring reliable
data throughput. •
Hinged lid allows quick and clear access to internal fiber for
splicing and termination. •
CCE is same width as a brick blow-out cover to
mask any bricks damaged by drilling.
Quantity Per
EA
Product Description
The Customer Connection Enclosure (CCE) is a Building Entry Point (BEP),
providing a fiber termination and network demarcation point external to the
connected premise in a Fiber to the Home (FTTH) network. In addition to
providing an external test point, the enclosure stores up to 50 m of 1.1 mm
cable. A loop-through facility allows for single fiber elements to be removed
and spliced while the remaining fiber can be fed on to the next connection
point. A single port in the rear of the closure allows fiber to be passed through
the wall into the customer premises. Supplied cable ties secure all
incoming/outgoing cables/blown fiber ducts and provide strain relief where
necessary. The CCE can be supplied pre-loaded with fiber adapters and
pigtails as required. •
2x SC Simplex/LC Duplex customer connections for
redundancy or multiple connections. •
4x heat shrink splices accommodate
connections to the adapters or drop cables. •
6 incoming/outgoing ports and
through-the-wall port to support multiple incoming and drop cables up to 7 mm
in diameter. •
Can store up to a maximum of 50 m of 1.1 mm cable.
Short Description
Customer Connection Enclosure, 1x SC Adapter SM, Black, 1/pkg
Global Part Name
CCE-A11121SX1/BK
Technical Description
The Customer Connection Enclosure (CCE) supports a maximum 2 x SC
Simplex or LC Duplex adaptors. The closure is manufactured from UV stable
ABS with a hinged lid which locks in the open position to allow for quick and
clear access to the internal fibre. The closure has 6 entry/exit ports at the
bottom of the closure which are suitable for cables and ducts up to a maximum
diameter of 8.5mm. A loop through facility allows for single fibre elements to
be removed and spliced whilst the remaining fibres can be fed on to the next
connection point. A single port in the rear of the closure allows for fibre to be
passed through the wall into the customer premises. Mechanical fixing is
provided to secure all incoming/outgoing cables/blown fibre ducts and to
provide strain relief where necessary. Internal positive fibre management and
fibre retention clips maintain a minimum 30mm bend radius throughout for up
to a maximum of 50m of 1.1mm diameter cable.
Variant
Outdoor FTTx Enclosures
Width W (Imperial)
5.12
Width W (Metric)
130
Height H (Imperial)
10.35
Height H (Metric)
263
Loading...