
1-Piece Cable Tie/Fir Tree Mount with Disc, 12.5mm Offset, 8.5"L, 6.1-7mm Hole; PA66HIRHS, Grey,
• Off-Set design allows bundles to sit off of mounting points to avoid friction
against surrounding areas. • Fir tree gives 3 to 1 extraction versus insertion
force making them strong and easy to install. • Friction tab inside of fir tree
allows tie to sit in mount without falling out prior to installation.
HellermannTyton's Off-Set Fir Tree Cable Tie and fixing offers a simple and
easy to use method of bundling and fixing cables, the design of the fir tree
ensures a positive and secure fixing into panels with thicknesses from .2" -
.26" or threaded blind holes. The 'disc' on the top of the fir tree covers the hole
and minimizes the ingress of water and dirt.

1-Piece Cable Tie/Fir Tree Mount with Disc, 12.5mm Offset, 8.5"L, 6.1-7mm
Hole; PA66HIRHS, Grey, 2000/ctn
T50ROSFT6SO12.5A-PA66HIRHS-GY
Minimum Tensile Strength (Imperial)
Minimum Tensile Strength (Metric)
Identification Plate Position
Bundle Diameter Min (Imperial)
Bundle Diameter Min (Metric)
Bundle Diameter Max (Imperial)
Bundle Diameter Max (Metric)

Panel Thickness Min(Imperial)
Panel Thickness Max(Imperial)
Panel Thickness Min (Metric)
Panel Thickness Max (Metric)
Mounting Hole Diameter D (Imperial)
0.24 - 0.28 ";0.24 - 0.26
Mounting Hole Diameter D (Metric)
6.35 mm (hexagonal) 6.5 mm
Mounting Hole Diameter D Min (Imperial)
Mounting Hole Diameter D Max (Imperial)
Mounting Hole Diameter D Max (Metric)
Polyamide 6.6, high impact modified, heat stabilized (PA66HIRHS)

Package Quantity (Metric)
© 2019 HellermannTyton. All Rights Reserved.