
2-Piece Cable Tie/Arrowhead Mount, 7.9" Long, 50lb Tensile, .25"–.26" Hole, .03"–.05" Pnl, PA46/PEEK,
The arrowhead design of this push mount offers a low insertion force and a
Integrated cap keeps out debris.
The Arrowhead Mount Tie is a two-piece bundling and fastening solution that
delivers strong extraction force. The disc blocks debris ingress through the
mounting hole. This convenient combination is used in many markets,
including automobile, aircraft and appliance.
2-Piece Cable Tie/Arrowhead Mount, 7.9" Long, 50lb Tensile, .25"–.26" Hole,
.03"–.05" Pnl, PA46/PEEK, Gray/Bge, 100/pkg

T50ROSP1SFT6.5-PA46/PEEK-GY/BGE
Minimum Tensile Strength (Imperial)
Minimum Tensile Strength (Metric)
Identification Plate Position
Bundle Diameter Min (Imperial)
Bundle Diameter Min (Metric)
Bundle Diameter Max (Imperial)
Bundle Diameter Max (Metric)

Panel Thickness Min(Imperial)
Panel Thickness Max(Imperial)
Panel Thickness Min (Metric)
Panel Thickness Max (Metric)
Mounting Hole Diameter D (Imperial)
Mounting Hole Diameter D (Metric)
Mounting Hole Diameter D Min (Imperial)
Mounting Hole Diameter D Max (Imperial)
Mounting Hole Diameter D Max (Metric)
Polyetheretherketone (PEEK) Polyamide 4.6 (PA46)

Operating Temperature (Metric)
-67°F to +464°F (-55°C to +240°C) -40°F to +266°F (-40°C to +130°C)
Reach Complaint(Article 33)
Package Quantity(Imperial)
Package Quantity (Metric)
© 2019 HellermannTyton. All Rights Reserved.