
2-Piece Cable Tie with Pipe Clip, 50lbs, Clip Dia .16"-.4" Max Bun Dia. 1.38" PA66HS Tie, HIRHS MNT, BLK
Bundle can rotate to any orientation, allowing routing in any direction
regardless of mounting point. •
2-piece design allows installer to slide clip
around cable tie to obtain optimum orientation •
relocation or adjustments simple.
HellermannTyton’s 2-Piece Cable Tie with Pipe Clip secures cables to tubular
frame rails. The cable tie bundles wires, cables or tubes, and the C-clip snaps
onto the tubular frame rail. The clip can be removed from the mounting surface
and reinstalled without additional fasteners.

2-Piece Cable Tie with Pipe Clip, 50lbs, Clip Dia .16"-.4" Max Bun Dia. 1.38"
PA66HS Tie, HIRHS MNT, BLK 500/pkg
T50ROC1B-PA66HS/PA66HIRHS-BK
Minimum Tensile Strength (Imperial)
Minimum Tensile Strength (Metric)
Identification Plate Position
Bundle Diameter Min (Imperial)
Bundle Diameter Min (Metric)
Bundle Diameter Max (Imperial)
Bundle Diameter Max (Metric)

Polyamide 6.6, high impact modified, heat stabilized (PA66HIRHS) Polyamide
6.6 heat stabilized (PA66HS)
Polyamide 6.6 heat stabilized (PA66HS)
Operating Temperature (Metric)
-40°F to +221°F (-40°C to +105°C)
Reach Complaint(Article 33)
Package Quantity(Imperial)
Package Quantity (Metric)

© 2019 HellermannTyton. All Rights Reserved.