
Rotatable Cable Tie and Edge Clip, 6.3" Length, Outside Serrated, PA66HS, Black, 500/bag
• Edge Clip applies easily to plastic and metal sheets without the need for a
mounting hole. • Edge Clip provides low insertion force and high extraction
force ideal for assembly environments. • Cable tie is both rotatable and outside
serrated to reduce bundle chafing.
These EdgeClips are also mounted simply by pushing them onto an edge. A
twistable EdgeClip is the ideal solution whenever flexible routing of cable
bundles is required. The cable route can even be modified post-installation.
The clips are available in 90° and 360° models for use with different types of
cable tie. On the CBT30MR the bundle runs at the side of the clip, on the
CBTO50R it runs over the centre of the clip.

Rotatable Cable Tie and Edge Clip, 6.3" Length, Outside Serrated, PA66HS,
Minimum Tensile Strength (Imperial)
Minimum Tensile Strength (Metric)
Identification Plate Position
Bundle Diameter Min (Imperial)
Bundle Diameter Min (Metric)
Bundle Diameter Max (Imperial)
Bundle Diameter Max (Metric)
Cable Tie Head Length (Imperial)

Cable Tie Width Max (Imperial)
Cable Tie Width Max (Metric)
Panel Thickness Min(Imperial)
Panel Thickness Max(Imperial)
Panel Thickness Min (Metric)
Panel Thickness Max (Metric)
Polyamide 6.6 heat stabilized (PA66HS) Polyacetal (POM)
Polyamide 6.6 heat stabilized (PA66HS)
Operating Temperature (Metric)
-40°F to +194°F (-40°C to +90°C)
Reach Complaint(Article 33)

Package Quantity(Imperial)
Package Quantity (Metric)
© 2019 HellermannTyton. All Rights Reserved.