
1-Piece Cable Tie/Arrowhead Mount with Seal, 6.3" Long, 50lb Tensile, PA66HS, Green, 500/bag
This tie has an arrowhead design of fixing which offers a positive, low push-in
force and a high pull-out force. When combined with the optional foam rubber
seal it offers additional protection against the ingress of moisture or dirt.
Arrowhead Push Ties with rubber seal secure fast and easy, while providing a
special rubber seal to minimize water, dirt, or dust from getting through the
mounting hole. The anchor adjusts for variations in panel thicknesses which
insures a secure fixing at all times.
1-Piece Cable Tie/Arrowhead Mount with Seal, 6.3" Long, 50lb Tensile,

T50SOSSFT6.5E-MDL-PA66HS-GN
Minimum Tensile Strength (Imperial)
Minimum Tensile Strength (Metric)
Identification Plate Position
Bundle Diameter Min (Imperial)
Bundle Diameter Min (Metric)
Bundle Diameter Max (Imperial)
Bundle Diameter Max (Metric)

Panel Thickness Min(Imperial)
Panel Thickness Max(Imperial)
Panel Thickness Min (Metric)
Panel Thickness Max (Metric)
Mounting Hole Diameter D (Imperial)
Mounting Hole Diameter D (Metric)
Mounting Hole Diameter D Min (Imperial)
Mounting Hole Diameter D Max (Imperial)
Mounting Hole Diameter D Max (Metric)
Polyamide 6.6 heat stabilized (PA66HS)

Operating Temperature (Metric)
-40°F to +221°F (-40°C to +105°C)
Reach Complaint(Article 33)
Package Quantity(Imperial)
Package Quantity (Metric)
© 2019 HellermannTyton. All Rights Reserved.