
An all-in-one bundling and fastening solution that saves time and reduces
Foam seal prevents ingress of moisture and debris and prevents
The arrowhead design of these ties offers a low insertion force and a high
extraction force. The foam rubber seal provides additional protection against
moisture and debris. One-piece mounting ties offer a complete solution by
simultaneously bundling and mounting cables, wires and hoses.
1-Piece Cable Tie/Arrowhead Mount with Seal, 6.3" Long, 50lb Tensile,

T50SOSSFT6.5E-MD-PA66HS-BK
Minimum Tensile Strength (Imperial)
Minimum Tensile Strength (Metric)
Identification Plate Position
Bundle Diameter Min (Imperial)
Bundle Diameter Min (Metric)
Bundle Diameter Max (Imperial)
Bundle Diameter Max (Metric)

Panel Thickness Min(Imperial)
Panel Thickness Max(Imperial)
Panel Thickness Min (Metric)
Panel Thickness Max (Metric)
Mounting Hole Diameter D (Imperial)
Mounting Hole Diameter D (Metric)
Mounting Hole Diameter D Min (Imperial)
Mounting Hole Diameter D Max (Imperial)
Mounting Hole Diameter D Max (Metric)
Polyamide 6.6 heat stabilized (PA66HS)

Operating Temperature (Metric)
-40°F to +221°F (-40°C to +105°C)
Package Quantity(Imperial)
Package Quantity (Metric)
© 2019 HellermannTyton. All Rights Reserved.