HELLER MIST40B Instruction Manual

Instruction Manual
40cm Misting Fan
Model: MIST40B
Please read and follow the instructions in this user manual even if you feel you are familiar with the product, and find a place to keep it handy for future reference.
For your convenience record the complete model number (located on the product identification plate) and the date you received the product, together with your purchase receipt and attach to the warranty and service information. Retain in the event that warranty service is required.
NOTE: The rating of this product (as marked on the product identification plate) is based on specific loading tests. Normal use or the use of other recommended attachments may draw significantly less power.
Important Safeguards
When using any electrically powered product, basic safety precautions should always be followed, including the following:
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT
WARNING!: - to reduce the risk of fire, electrical shock or injury to persons or property:
Always operate the product from a power source of the same voltage, frequency and rating as
indicated on the product identification plate.
Remove the unit from its packaging and check to make sure it is in good condition before using.
Do not let children play with parts of the packaging (such as plastic bags).
Close supervision is necessary when the product is used by or near children or infirm persons. Do not
allow children to use it as a toy.
Do not operate any product with a damaged cord or plug, or after the product malfunctions, or is
dropped or appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
Before unplugging the power cord, be sure to turn the power off. When touching the unit, be sure
your hands are dry to prevent electrical shock.
Avoid making contact with moving parts. Never insert fingers, pencils or any other objects through
the guards whenever the power plug is connected, especially while the unit is working.
Always place the fan on a stable, level surface when operating to prevent the fan from overturning.
Do not run the power cord under carpet. Do not cover the power cord with throw rugs or runners. Route the power cord away from walking paths so that nobody can trip over it. The cable should be kept away from heat, sharp edges and oil.
Your misting fan should be placed away from heat sources such as; radiators, gas/electric heaters
and direct sunlight.
To reduce the risk of electric shock, do not immerse or expose the product or flexible cord to rain,
moisture or any liquid other than those necessary for correct operation of the product.
This product should not be used in the immediate vicinity of water, such as bathtub, washbowls,
bathroom swimming pool etc. Where the likelihood of immersion or splashing could occur.
Switch off and unplug from outlet when not in use, before assembling or disassembling parts and
before cleaning. Remove by grasping the plug - do not pull on the cord.
Be sure that no other high current appliances are plugged into the same circuit as your fan, as an
overload can occur.
Do not remove any fixed covers.
Avoid the use of an extension cord as the extension cord may overheat and cause a risk of fire.
Do not use the appliance for other than its intended use.
Do not use outdoors. FOR INDOOR USE ONLY.
Do not leave the appliance unattended when switched on.
Do not cover the grill, or operate in close proximity to curtains etc.
The use of attachments or accessories not recommended or sold by the product distributor may
cause personal or property hazards or injuries.
Ensure that the fan is switched off from the supply mains before removing the guard.
This product is intended for normal domestic/household use only.
Use this fan as described in this manual. Any other uses, not recommended by the manufacturer,
may cause fire, electric shock, or injury to persons and may void the warranty.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
The installation of a residual current device (safety switch) is recommended to provide additional
safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.
Do not touch / pull out / put back the water tank when the unit is plugged into a power source. Make
sure it is physically disconnected from the mains before doing anything with the water tank.
When the water level is too low, the safety switch will cut out operation of the mist function. Unplug
the unit and refill the water tank for further operation.
Do not let dust or other particles collect on the mist plate - if the mist outlets are blocked, the mist
function could malfunction.
Do not use hot water in the water tank - use water less than 40 degrees Celsius.
Use only water in the water tank. Do not add chemicals or oils or any other additive.
Infants, the disabled and the elderly should not be in the direct airflow from the fan for long periods
of time.
Introduction
This product has both fan and humidifier functions, which can be used together or separately. The humidifier is especially useful on very hot humid days, as the extra mist in the air helps not only to cool you down, but also to increase the humidity in the dry heat.
Parts Location
1. Front mist plate
2. Front Guard
3. Blade cap
4. Blade
5. Guard Mounting Nut
6. Rear Guard
7. Motor
8. Fan Body
9. Base
10. Castor wheels
11. Base Nut
12. Fixer
13. Plastic Tube
14. Tube Button
Loading...
+ 4 hidden pages