Heller HHDF30S User Manual

READ AND SAVE THESE INSTRUCTIONS

Instruction Manual

30cm Desk Fan

Model: HHDF30S

Please read and follow the instructions in this user manual even if you feel you are familiar with the
product, and find a place to keep it handy for future reference.

For your convenience record the complete model number (located on the product identification
plate) and the date you received the product, together with your purchase receipt and attach to the
warranty and service information. Retain in the event that warranty service is required.

NOTE: The rating of this product (as marked on the product identification plate) is based on specific
loading tests. Normal use or the use of other recommended attachments may draw significantly
less power.

IMPORTANT SAFEGUARDS

When using any electrically powered product, basic safety precautions should always be followed,
including the following:

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT

WARNING!: - to reduce the risk of fire, electrical shock or injury to persons or property:

• Always operate the product from a power source of the same voltage, frequency and rating as

indicated on the product identification plate.

• Remove the unit from its packaging and check to make sure it is in good condition before using.

• Do not let children play with parts of the packaging (such as plastic bags).

• Close supervision is necessary when the product is used by or near children or infirm persons. Do

not allow children to use it as a toy.

• Do not operate any product with a damaged cord or plug, or after the product malfunctions, or is

dropped or appears damaged in any way. Return the complete product to the place of purchase
for inspection, repair or replacement.

• Before unplugging the power cord, be sure to turn the power off. When touching the unit, be

sure your hands are dry to prevent electrical shock.

• Never install the unit where it is exposed to direct sunlight, excessive moisture/rain, dust and lack

of ventilation near any heat sources.

• Avoid making contact with moving parts. Never insert fingers, pencils or any other objects

through the guards whenever the power plug is connected, especially while the unit is working.

• Always place the fan on a stable, level surface when operating to prevent the fan from

overturning. Do not run the power cord under carpet. Do not cover the power cord with throw
rugs or runners. Route the power cord away from walking paths so that nobody can trip over it.
The cable should be kept away from heat, sharp edges and oil.

• To reduce the risk of electric shock, do not immerse or expose the product or flexible cord to

rain, moisture or any liquid other than those necessary for correct operation of the product.

• This product should not be used in the immediate vicinity of water, such as bathtub, washbowls,

bathroom swimming pool etc. Where the likelihood of immersion or splashing could occur.

• Switch off and unplug from outlet when not in use, before assembling or disassembling parts and

before cleaning. Remove by grasping the plug - do not pull on the cord.

• Be sure that no other high current appliances are plugged into the same circuit as your fan, as an

overload can occur.

• Avoid the use of an extension cord as the extension cord may overheat and cause a risk of fire.

• Do not use the appliance for other than its intended use.

• Do not use outdoors. FOR INDOOR USE ONLY.

• Do not leave the appliance unattended when switched on.

• Do not cover the grill, or operate in close proximity to curtains etc.

• The use of attachments or accessories not recommended or sold by the product distributor may

cause personal or property hazards or injuries.

• This product is intended for normal domestic/household use only.

• Never leave a working appliance unattended, even for a short period of time – always switch it

off. Please unplug the appliance from the power supply when not in use.

• Use this fan as described in this manual. Any other uses, not recommended by the manufacturer,

may cause fire, electric shock, or injury to persons and may void the warranty.

• This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning the use of the appliance by a person responsible for their
safety.

• The installation of a residual current device (safety switch) is recommended to provide

additional safety protection when using electrical appliances. It is advisable that a safety switch
with a rated residual operating current not exceeding 30mA be installed in the electrical circuit
supplying the appliance. See your electrician for professional advice.

• Children should be supervised to ensure that they do not play with the appliance.

• Do not leave the fan running unattended.

• WARNING: If the supply power cord is damaged, the power cord must be replaced by the

manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• This product has not been designed for any uses other than those specified in this booklet.

• CAUTION: Never insert your fingers or any other objects (hair,

clothes,

utensils, knives, screw

drivers etc.) into the openings of

the

guard or close to the blade when the appliance is

connected

to the power

supply.

• CAUTION: DO NOT COVER the appliance in any way in order to

avoid

overheating and

fire.

• CAUTION - RISK OF ELECTRIC SHOCK: To reduce the risk of electric shock do not open this

device,

there are not serviceable parts for customers. Please

refer

any maintenance or repair to

qualified

personnel.

SAVE THESE INSTRUCTIONS

PARTS & FEATURES

1. Front Guard

2. Blade Nut

3. Blade

4. Guard Mounting Nut

5. Back Guard

6. Motor Shaft

7. Motor Housing

8. Oscillation Knob

9. Stand

10. Speed Control Switch (0,1,2,3)

11. Base 12. Screws

BEFORE FIRST USE

Before use, remove all packaging and inspect the appliance for any damage. If there appears to be any
damage, please take the unit back to place of purchase for a replacement.

ASSEMBLY INSTRUCTIONS

1. Fix the base into the stand with the 4 screws.

2. Loosen the guard mounting nut from the motor housing.

3. Fit the rear guard onto the motor housing firmly and fasten by turning the guard mounting nut

tightly, but do not over tighten.

4. Fit the blade onto the motor shaft.

5. Connect the front guard to the rear guard and clip them together with the clips provided.

6. Both guards must be secured with the screws provided.

CAUTION: To avoid of electric shock, you must always switch off and unplug the fan before cleaning.

CAUTION:

• Select a suitable location for the fan. Always choose a safe location in accordance to the

safely recommendations outlined.

• When placing a fan on a table or shelf, always ensure that the power cord does not hang

where it can accidentally be pulled /pushed or accidentally fall.

• Do not hang or mount the fan on a wall of ceiling.

NOTE: Before inserting the plug into a power outlet, make sure that the correct voltage being used
corresponds to what is indicated on the rating label, and that the socket has an earth facility.

OPERATING INSTRUCTIONS

1. Place the fan on a firm and level surface.

2. Plug the fan into a power outlet.

3. Select the desired speed setting:

• 0 – OFF

• 1 - LOW

• 2 – MEDIUM

• 3 – HIGH

4. The fan can be set to oscillate by pushing the oscillating knob down. To stop the oscillating

feature, pull the oscillation knob up.

CAUTION: The fan should always be switched off when making any adjustments to the fan head angle.

5. To adjust the tilt angle of the fan head, loosen the neck screw, swivel the fan to the desired angle

then re-tighten the screw.

CARE & CLEANING

• Your appliance must be switched OFF via the main power supply and unplugged, and allow it to

cool down before proceeding with any cleaning, assembling or disassembling.

• Clean the housing with a damp cloth, a vacuum cleaner or a dusting brush.

• We recommended lightly running a vacuum cleaner brush nozzle over the fan grille to remove

any dust or dirt that may have accumulated.

• Never use flammable or abrasive cleaning agents such as benzene or spirits to clean the

appliance.

• Never immerse the appliance in water.

NOTE: If the power cord set of this appliance becomes damaged, discontinue use. Repairs should be
undertaken only by a qualified technician.

SPECIFICATIONS

Model

Description

Voltage

Frequency

Wattage

HHDF30S

30cm Desk Fan

220-240V~

50Hz

40W

CUSTOMER SERVICE

Australian Customer Service
GAF Control (Sales) Pty Ltd
P.O Box 19
Altona North Victoria 3025
Phone: [phone]
Hours: 9am-5pm (EST) Mon-Fri
www.gafcontrol.com.au
*This product may vary slightly to the product illustrated due to ongoing product development.