HELLER CWH20NS Instruction Manual

Instruction Manual
2000W Ceramic Wall
Heater
Model: CWH20NS
READ AND SAVE THESE INSTRUCTIONS
Important Notes
1. The specified voltage must match the mains voltage. Use an adequate wire cross-section.
2. The appliance air inlet and outlet openings must not be obstructed in any way!
3. Never move the heater during operating, always unplug heater when not in use.
4. Never use the appliance if the appliance or cord is damaged. The appliance may only be opened up
and repaired by authorized qualified personnel.
5. Installation of the heater on the wall MUST BE 1.8m high from the floor and the heater location
MUST NOT be directly below or in front of a main power socket.
Read and follow the instructions in this user manual even if you feel you are familiar with the product, and find a place to keep it handy for future reference.
For your convenience record the complete model number (located on the product identification plate) and the date you received the product, together with your purchase receipt and attach to the warranty and service information. Retain in the event that warranty service is required.
NOTE: The rating of this product (as marked on the product identification plate) is based on specific loading tests. Normal use or the use of other recommended attachments may draw significantly less power.
Important Safeguards
When using any electrically powered product, basic safety precautions should always be followed, including the following:
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT
WARNING!: - to reduce the risk of fire, electrical shock or injury to persons or property:
Always operate the product from a power source of the same voltage, frequency and rating as
indicated on the product identification plate.
Remove the unit from its packaging and check to make sure it is in good condition before using.
Do not let children play with parts of the packing (such as plastic bags).
Close supervision is necessary when the product is used by or near children or infirm persons. Do not
allow children to use it as a toy.
Do not operate any product with a damaged cord or plug, or after the product malfunctions, or is
dropped or appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
Before unplugging the power cord, be sure to turn the power off. When touching the unit, be sure
your hands are dry to prevent electrical shock.
Ensure the cord is fully extended before use and arrange it so that it is not in contact with any part of
the heater.
In use, some parts of the heater are hot. When moving, hold the heater only by the handle provided.
Do not use the heater in areas such as garages where petrol, paint or other flammable substances
are used or stored.
Do not use near or point the heater to furniture, animals, curtains or other inflammable objects.
Keep combustible materials such as furniture, bedding and any other combustible materials at least 1 metre from the front and sides, and from the rear of the heater.
Do not place the cord under carpet or cover with throw rugs or furniture. Arrange the cord so that it
cannot be tripped over.
Do not place the heater on bedding or on thick and long pile carpet where the openings may be
blocked.
To reduce the risk of electric shock, do not immerse or expose the product or flexible cord to rain,
moisture or any liquid other than those necessary for correct operation of the product.
This product should not be used in the immediate vicinity of water, such as bathtub, washbowls,
bathroom swimming pool etc. Where the likelihood of immersion or splashing could occur.
Switch off and unplug from outlet when not in use, before assembling or disassembling parts and
before cleaning. Remove by grasping the plug - do not pull on the cord.
A common cause of overheating is deposits of dust and fluff entering the heater. Ensure these
deposits are removed regularly by unplugging the heater, allowing it to cool and cleaning as described in the Care, Cleaning and Storage section.
Be sure that no other high current appliances are plugged into the same circuit with your heater as
an overload can occur.
Avoid the use of an extension cord as the extension cord may overheat and cause a risk of fire.
Do not use the appliance for other than its intended use.
Do not use outdoors. FOR INDOOR USE ONLY.
Do not leave the appliance unattended when switched on.
Do not place objects on the product or allow objects to obstruct the inlet or outlet openings, or
operate in close proximity to walls or curtains, etc. Do not cover the unit when in operation.
Do not locate the heater immediately below a socket-outlet.
The use of attachments or accessories not recommended or sold by the product distributor may
cause personal or property hazards or injuries.
This product is intended for normal domestic/household use only.
Use this heater as described in this manual. Any other uses, not recommended by the manufacturer,
may cause fire, electric shock, or injury to persons and may void the warranty.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this
appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
The installation of a residual current device (safety switch) is recommended to provide additional
safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.
Location
1. The appliance should be placed with a minimum distance of 90 cm away from flammable objects
(e.g. curtains), walls or other structures.
2. Installation of the heater on the wall MUST BE 1.8m high from the floor and the heater location
MUST NOT be directly below a main power socket.
Power Cord
Use only an approved extension cord that is suitable for the appliance rating.
Do not lay the cord under a carpet. Do not lay rugs, mats or similar articles on it. Position the cord so
that it does not pose an obstruction or a tripping hazard.
Never pull the plug out of the socket at the cord.
Always disconnect the mains plug when the appliance is not in use.
Attention! The appliance may only be used for normal domestic use and not for industrial use.
Loading...
+ 5 hidden pages