HELLER CFH10, CFH20, CFH30, CFH55 Installation Use And Care Manual

INSTALLATION USE AND CARE MANUAL

CHEST FREEZER

MODEL: CFH10/CFH20/CFH55/CFH30

Please read this manual carefully and follow all safety rules and

operating instructions before using the appliance.

FDH 280

BEFORE FIRST USE

Read and follow all the instructions in this Installation Use And Care Manual even if you feel you are
familiar with the product, and find a place to keep it handy for future reference.

Your attention is , Care, drawn particularly to the sections concerning IMPORTANT SAFEGUARDS

For your convenience record the complete model number (located on the product identification plate) and
the date you received the product, together with your purchase receipt and attach to the warranty and
service information. Retain in the event that warranty service is required.

NOTE: The rating of this product (as marked on the product identification plate) is based on specific
loading tests. Normal use or the use of other recommended attachments may draw significantly less
power.

When using any electrically powered product, basic safety precautions should
always be followed, including the following:

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT.

WARNING - to reduce the risk of fire, electrical shock or injury to persons or property:

•

Always operate the product from a power source of the same voltage, frequency and rating as
indicated on the product identification plate.

• Close supervision is necessary when the product is used by or near children or invalids. Do not allow
children to use it as a toy.

• Do not operate any product with a damaged cord or plug, or after the product malfunctions, or is
dropped or appears damaged in any way. Return the complete product to the place of purchase for
inspection, repair or replacement.

• WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or
property damage. Refer to this manual. For assistance or additional information consult a qualified
installer, service agency or the gas supplier.

• To reduce the risk of electric shock, do not immerse or expose the product or flexible cord to rain,
moisture or any liquid.

• This product should not be used in the immediate vicinity of water, such as bathtub, washbowls,
swimming pool etc. where the likelihood of immersion or splashing could occur.

• Never install the unit where it could be subject to:

* Heat sources such as radiators, heat registers, stoves or other products that produce heat.
* Direct sunlight.
* Excessive dust.
* Mechanical vibration or shock.
* Lack of ventilation, such as bookcase or cabinet.
* Uneven surface.
* Moisture.

It is hazardous for anyone other than an Authorised Service Person to service this
appliance. In Queensland – the authorized Service Person MUST hold a Gas Work
Authorisation for hydrocarbon refrigerants, to carry out Servicing or repairs which
involve the removal of covers.

IMPORTANT SAFEGUARDS

• Switch off and unplug from outlet when not in use, before assembling or disassembling parts and
before cleaning.

• Do not place objects on the product or allow objects to obstruct the inlet or outlet openings, or operate
in close proximity to walls or curtains, etc. The back of the appliance should be close to the wall but
leaving the required distance for ventilation as stated in the installation instructions.

• After installation, the appliance should be left for 2 hours before it is switched on in order to allow the
refrigerant to settle.

• Always install the freezer on flat and solid surface.

• Do not hang anything on the door in order to avoid the freezer from tilting or goods from dropping.

• Do not store or use gasoline or other flammable vapours and liquids in the vicinity of this or any other

appliance.

• Do not extend or fold the power cord, keep the power cord away from compressor, because the
compressor will be hot when the unit operates.

• The use of attachments or accessories not recommended or sold by the product distributor may
cause personal or property hazards or injuries.

• Do not use the freezer outdoors.

• This product is intended for normal domestic/household use only.

Remove by grasping the plug - do not pull on the cord.

When there is a power failure:

• If you are informed that there will be an interruption to the power, set the thermostat control to 7, the

coldest setting to let it operate for 2 to 3 hours before the power interruption and allow the unit to
achieve maximum freezing temperature. Ensure the thermostat is returned to the normal position after
the power is restored.

• Minimize the number of times the door is opened.

• Dry the baskets before restarting the freezer.

READ AND SAVE THESE INSTRUCTIONS

PARTS LOCATION:

CONTROL PANEL

INSTALLING THE FREEZER

Before using the freezer, remove all the exterior and interior packaging.
To ensure correct operation, this appliance must not be located where the temperature
will rise above 38°C.

Good Ventilation

For the purpose of easy dissipation of heat, high efficiency of refrigeration and low power consumption, a
space or clearance is required around the refrigerator. The refrigerator must have at least 50mm
clearance between the rear of the appliance and the wall, 100mm between the sides and wall, and the
space above the top should be at least 50mm. Ensure that there is enough spacing to open the door to
160°.