HELIOR BRAVER User Manual

BRAVER UPS

(Uninterruptible Power System)

User’s Manual

Safety – CAUTION!

 This UPS utilizes voltages that may be hazardous. Do not attempt to

disassemble the unit. The unit contains no user replaceable parts.
Only authorized service personnel may perform repairs.

 Internal battery voltage is 12V DC. Sealed, lead-acid, 6 cells battery.
 Connection to any other type of receptacle other than a two-pole,

three-wire grounded receptacle may result in shock hazard as well as
violate local electrical codes.

 In the event of an emergency, press the “OFF” button and disconnect

the power cord from the AC power supply to properly disable the
UPS.

 Do not allow liquids or any foreign object to enter the UPS. Do not

place beverages or any other liquid-containing vessels on or near the
unit.

 This unit intended for installation in a controlled environment

(temperature controlled, indoor area free of conductive contaminants).
Avoid installing the UPS in location where there is standing or running
water, or excessive humidity.

 Do not plug the UPS input into its own output.
 Do not attach a power strip or surge suppressor to the UPS.
 Do not attach non-computer-related items, such as medical

equipment, life-support equipment, microwave ovens, or vacuum
cleaners to UPS

 To reduce the risk of overheating the UPS, do not cover the UPS

cooling vents and avoid exposing the unit to direct sunlight or
installing the unit near heat emitting appliances such as space
heaters or furnaces.

 Unplug the UPS prior to cleaning and do not use liquid or spray

detergent.

 Do not dispose of batteries in a fire as they may explode.
 Do not open or mutilate the battery or batteries. Released electrolyte

is harmful to the skin and eyes. It may be toxic.

 A battery can present a risk of electrical shock and high short circuit

current. The following precautions should be observed when working
on batteries :

1) Remove watches, rings, or other metal objects from the hands.

2) Use tools with insulated handles.

3) Wear rubber gloves and boots.

4) Do not lay tools or metal parts on top of batteries.

5) Disconnect charging source prior to connecting or disconnecting
batteries terminal.

 Servicing of batteries should be performed or supervised by

personnel knowledgeable of batteries and the required precautions
should be taken. Keep unauthorized personnel away from
batteries.

 When replacing batteries, replace with the same number of the sealed

lead-acid batteries.

 The socket-outlet shall be installed near the equipment and easily

accessible.

 With the installation of the UPS, it should be prevented that the sum

of (UPS and) the connected (load) leakage current exceeds 3.5mA.

 This pluggable type A equipment with battery installed by the supplier

is operator installable and may be operated by laymen.

 Attention!! Hazardous through electric shock. Also with

disconnection of this unit from the mains, hazardous voltage still may
be accessible through supply from battery. The battery supply
should be therefore disconnected in the plus and minus pole at the
connectors of the battery when maintenance or service work inside of
the UPS is necessary.

System Description

Front Panel –

1. Power Switch & LED Indicator

2. LED Indicators --

AC Mode: Green Lighting

Battery Mode: Yellow Flashing

Fault Mode: Red Lighting

1. Power switch

2. LCD display