Heitronic 37350, 37351 Installation and operating instructions
GB Installation and operating instructions
Heitronic
®
D-75203 Königsbach
-
Stein
LED flood light
Art. No. 37350-37351
Many thanks for deciding to buy our lights.
Our LED flood light is made out of sturdy, high value materials and will provide you with quality
lighting. The LED flood light consists of a stable aluminium housing and a connection cable. It can be
used both indoors and outdoors.
Please read through installation and operation instructions carefully and keep these in a safe
place.
We do not accept liability for damage to persons or property caused by non observation of the
instructions, improper handling or for unauthorized changes made to the product.
Package contents:
1 x LED flood light
Installation and operating instructions
Technical data:
Article Connection Illuminant
30W LED illuminant,
37350
37351
Before Installation:
The ground spike may only be used after it has been taken out of the packaging.
Take the parts carefully out of the packaging.
Make sure, before using the lighting system that this has not been damaged during
transportation. The lighting system must not be operated if there is damage to cable or the
electrical parts are damaged. Each faulty fuse has to be replaced. Repairs may only be done
by a specialist electrician.
Keep packaging materials well away from children and pets. Danger of suffocation!
Safety and warning notes:
Do not look directly into the LED - especially for longer periods of time - without protecting
your eyes. A LED beam should not be directed into other people's eyes.
Operation is strictly forbidden if there is damage to the lights, plugs or the supply line.
Never make your own repairs to faulty parts. Repairs must be done by trained specialists.
Do not leave children unattended in the area of the lights or other electrical appliances.
Never expose the lights to a direct jet of water (garden hose, for example) and never immerse
the lights into water or other liquids!
Do not expose the lights to extreme heat or exposed flames.
The entire product must neither be changed nor converted. Changes made to the lighting set
lead to invalidation of the guarantee (warranty).
230V 50 Hz
230V 50 Hz
4000K,2000lm,100°
cannot be changed
30W LED illuminant,
4000K,2000lm,100°
cannot be changed
Protection
type
IP 65 I
IP 65 I
Protection
Class
Installation instructions Art. No. 37350-37351 1of 2 Status 12.2014
H. Vollmer GmbH
Allmendring 29
Care and servicing:
Heitronic
®
D-75203 Königsbach
-
Stein
You must make sure that the power supply is disconnected before cleaning.
Use a dry, or slightly damp cloth for cleaning.
Never use chemicals or abrasives for cleaning.
Disposal:
Old electronic equipment must be brought to public connection points and must not be
disposed of as household waste.
Installation:
Perform all handling operations on the ground spike only when the power is disconnected.
Place the flood light at the selected place by following the safety and warning notes. Make
sure that no water can collect at the location.
Make sure that there are no obstacles in the walking area when laying the cable.
The ground spike and the cable must not be buried into the ground and must be freed from
leaves and dirt if necessary.
Check the entire system at regular intervals for tightness, ability to function and possible
damage.
Check the proper connections once again.
The name plate must not be removed.
Installation instructions Art. No. 37350-37351 1of 2 Status 12.2014
H. Vollmer GmbH
Allmendring 29
Loading...